Introducció
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Spektrum S6170 Standard Digital Surface Servo. Designed for 1/10 2WD applications, this servo offers reliable performance and durability.
Image: The Spektrum S6170 Standard Digital Surface Servo, a black rectangular unit with a white output shaft and attached wiring harness.
Precaucions de seguretat
- Always disconnect power to your RC vehicle before installing or removing the servo.
- Ensure all connections are secure to prevent intermittent operation or damage.
- Avoid exposing the servo to extreme temperatures or harsh chemicals.
- Do not attempt to disassemble the servo, as this may void the warranty and cause damage.
Configuració
1. Instal·lació
- Mounting the Servo: Securely mount the S6170 servo into the designated servo tray or mounting location within your RC vehicle chassis. Use appropriate screws and grommets to minimize vibration.
- Connecting the Servo Horn: Attach the appropriate servo horn to the output shaft. Ensure the horn is centered before connecting the linkage.
- Linkage Connection: Connect the steering or throttle linkage from your vehicle to the servo horn. Adjust the linkage length to achieve proper geometry and prevent binding.
2. Connexió elèctrica
- Connect the servo's lead to the appropriate channel on your RC receiver. The S6170 features a long lead, suitable for larger chassis without requiring an extension.
- Ensure the polarity is correct: typically, orange/yellow is signal, red is positive (+), and brown/black is negative (-).
3. Calibració inicial
- With your transmitter and receiver powered on, ensure the servo is centered. Adjust your transmitter's trim settings if necessary to achieve a neutral position.
- Verify full range of motion without binding or excessive strain on the servo or linkages.
En funcionament
The Spektrum S6170 is a digital surface servo designed for precise and responsive control in RC vehicles. Its digital circuitry provides consistent torque and speed throughout its travel.
- Resposta: The servo offers a quick response time of 0.16 sec/60 degrees, making it suitable for both steering and throttle applications.
- Parell: At 4.8V, it provides 70 oz.-in. of torque, ideal for most 1/10 2WD vehicles.
- Disseny impermeable: The case is designed to protect internal electronic components from water ingress, enhancing durability in various operating conditions.
Manteniment
- Neteja: Periodically clean the exterior of the servo to remove dirt, dust, and debris. Use a soft, dry cloth. Avoid using solvents or harsh cleaners.
- Inspecció: Regularly inspect the servo case for cracks or damage. Check the servo horn and linkages for wear or looseness. Ensure the wiring is intact and connections are secure.
- Emmagatzematge: Store the servo in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Servo does not respond. | No power, incorrect connection, faulty receiver channel, damaged servo. | Check power supply to receiver. Verify servo connection to receiver. Test with a different receiver channel or a known good servo. Replace servo if damaged. |
| Erratic or inconsistent movement. | Loose connection, radio interference, low battery voltage, damaged gears. | Secure all connections. Check for sources of interference. Ensure receiver battery is fully charged. Inspect servo gears for damage. |
| Servo makes noise but does not move or moves with difficulty. | Binding in linkages, stripped gears, obstruction. | Disconnect linkages and test servo independently. Inspect gears for stripping. Remove any obstructions. |
| Servo overheats. | Excessive load, continuous binding, incorrect voltage. | Reduce load on servo. Ensure linkages move freely. Verify input voltage està dins de l'interval especificat. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Spektrum |
| Número de model | SPMSS6170 |
| Torque (4.8V) | 70 oz.-in. (5.04 kg-cm) |
| Torque (6.0V) | 65 oz.-in. (4.68 kg-cm) |
| Speed (4.8V) | 0.16 sec/60 degrees |
| Speed (6.0V) | 0.14 sec/60 degrees |
| Tipus d'engranatge | Plàstic |
| Impermeable | Yes (Waterproof case design) |
| Dimensions | 4.3 x 3.1 x 1.8 polzades (aproximadament) |
| Pes | 0.1 quilograms (aproximadament) |
| Aplicació | 1/10 2WD Surface Vehicles |
Nota: Les especificacions estan subjectes a canvis sense previ avís.
Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial de Spektrum. website or contact Horizon Hobby customer service. Keep your proof of purchase for warranty claims.
Fabricant: Hobby Horizon
Weblloc: www.spektrumrc.com
