Introducció
This manual provides detailed instructions for the proper setup, operation, and maintenance of your FONESTAR MSH-110 VHF Wireless Microphone System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
The FONESTAR MSH-110 is a compact VHF wireless microphone system operating in the 174 to 194 MHz frequency range. It includes a receiver unit and a high-quality unidirectional dynamic handheld microphone, designed for clear audio transmission.
Informació de seguretat
Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aquest producte per reduir el risc d'incendi, descàrrega elèctrica i lesions.
- No exposeu la unitat a la pluja o la humitat.
- No obriu la c.asing; demaneu totes les tasques de manteniment a personal qualificat.
- Ensure proper ventilation around the receiver.
- Use only the provided power adapter for the receiver.
- Elimineu les bateries de manera responsable.
Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- 1 x FONESTAR MSH-110 VHF Receiver
- 1 x FONESTAR Handheld Wireless Microphone
- 1 x Power Adapter (for receiver)
- Batteries (for microphone)
Image: The FONESTAR MSH-110 system, showing the compact receiver with its antenna and the handheld wireless microphone.
Configuració
Configuració del receptor
- Col·locació: Position the receiver on a stable, flat surface, away from sources of interference (e.g., computers, Wi-Fi routers). Ensure adequate ventilation.
- Antena: Extend the receiver's antenna fully for optimal signal reception.
- Connexió d'alimentació: Connect the provided 12V DC power adapter to the receiver's power input and then plug it into a 230V AC wall outlet. The "POWER" indicator light on the receiver should illuminate.
- Sortida d'àudio:
- Balanced Output (XLR/Cannon): Connect an XLR cable from the receiver's balanced output to a balanced input on your mixer or amplifier. This provides a low-impedance, interference-resistant signal.
- Unbalanced Output (6.3mm Jack): Connect a 6.3mm jack cable from the receiver's unbalanced output to an unbalanced input on your mixer or ampmés viu.
Configuració del micròfon
- Instal·lació de la bateria: Unscrew the lower part of the handheld microphone to access the battery compartment. Insert the required AA batteries, ensuring correct polarity.
- Encès: Slide the power switch on the microphone to the "ON" position. The microphone's indicator light should illuminate.
Instruccions de funcionament
Encendre el sistema
- Ensure the receiver is connected to power and an audio system.
- Turn on the receiver. The "POWER" indicator will light up.
- Turn on the handheld microphone. The microphone's indicator will light up.
- When the microphone is active and transmitting, the "MIC ON" indicator on the receiver should illuminate, and the "AF" (Audio Frequency) indicator will light up when audio is detected.
Ajust de volum
- Use the volume control knob on the receiver to adjust the output level of the microphone.
- Further volume adjustments can be made on your connected mixer or ampmés viu.
Control de squelch
The receiver features a squelch control to suppress unwanted background noise or static when no audio signal is being transmitted from the microphone. Adjust this control to find the optimal balance between signal reception and noise suppression.
Informació de freqüència
The system operates on a fixed VHF frequency within the 174-194 MHz range, controlled by a quartz crystal. No manual frequency tuning is required or possible.
Manteniment
- Neteja: Use a soft, dry cloth to clean the receiver and microphone. Do not use liquid cleaners or solvents.
- Substitució de la bateria: Replace microphone batteries when the indicator light dims or audio quality degrades. Remove batteries if the microphone will not be used for an extended period.
- Emmagatzematge: Guardeu el sistema en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so del micròfon. |
|
|
| Poor sound quality, static, or dropouts. |
|
|
| Receiver "MIC ON" or "AF" indicator not lighting up. |
|
|
Especificacions
| Nom del model | MSH 110 |
| Interval de freqüència | VHF 174 - 194 MHz (Fixed Frequency) |
| Tipus de micròfon | Handheld, Dynamic, Unidirectional |
| Resposta de freqüència | 50 - 15,000 Hz |
| Receiver Audio Output (Balanced) | 1 x XLR/Cannon, 600 Ω, 0-20 mV |
| Receiver Audio Output (Unbalanced) | 1 x 6.3mm Jack, 10,000 Ω, 0-100 mV |
| Font d'alimentació del receptor | 230V AC / 12V DC (adapter included) |
| Font d'alimentació del micròfon | AA Batteries (not rechargeable) |
| Receiver Dimensions (L x D x H) | 220 x 114 x 35 mm |
| Pes de l'article | 1 quilograms |
| Material | Llautó |
| Característiques especials | Funcionament sense fil |
| Usos recomanats | Live vocal performances, karaoke, public speaking |
Garantia i Suport
Information regarding warranty coverage and customer support for the FONESTAR MSH-110 system is typically provided at the point of purchase or on the official FONESTAR website. Please refer to your purchase documentation for specific warranty terms and contact information for technical assistance.
For further assistance, please visit the official FONESTAR weblloc web o poseu-vos en contacte amb el vostre distribuïdor local.