Techly Tilting Wall Mount (Model B00DEBVVHS) Instruction Manual

1. Introducció

This manual provides detailed instructions for the safe and proper installation and operation of your Techly Tilting Wall Mount, Model B00DEBVVHS. This wall mount is designed to securely hold LED/LCD TVs ranging from 13 to 30 inches, with a maximum weight capacity of 23 kg (51 lbs). It features adjustable mounting holes compatible with VESA standards 75x75 mm and 100x100 mm, and offers a tilt range of +/- 15 degrees for optimal viewing angles. The mount maintains a distance of 98 mm from the wall.

Imatge 1.1: Frontal view of the Techly Tilting Wall Mount.

2. Informació de seguretat

• Llegiu atentament totes les instruccions: Before installation, ensure you understand all instructions. If you have any doubts, consult a qualified professional.
• Capacitat de pes: Do not exceed the maximum weight capacity of 23 kg (51 lbs). Overloading can result in serious injury or property damage.
• Mida de la pantalla: This mount is designed for TVs between 13 and 30 inches. Using it with TVs outside this range may compromise stability.
• Tipus de paret: Ensure the mounting surface can safely support the combined weight of the mount and your TV. This mount is intended for installation on solid concrete walls, brick walls, or wood stud walls. Do not install on drywall alone.
• Eines: Use appropriate tools for installation. Wear safety glasses and other protective gear as needed.
• Nens: Mantenir els nens allunyats de la zona d'instal·lació.
• Manteniment: Comproveu periòdicament que el suport estigui ben fixat i que tots els elements de fixació estiguin ben ajustats.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació. Si falta alguna peça o està danyada, no continueu amb la instal·lació i poseu-vos en contacte amb el servei d'atenció al client.

• Wall Mount Assembly (1 unit)
• Mounting Hardware (screws, anchors, washers, spacers)

Imatge 3.1: View of the wall mount components, including the main bracket and articulating arm.

4. Especificacions

Image 4.1: Technical drawing showing key dimensions and VESA mounting points.

5. Configuració i instal·lació

Eines necessàries (no incloses): Pencil, Stud Finder (for wood studs), Drill, Drill Bits (appropriate for wall type), Level, Phillips Head Screwdriver, Socket Wrench.

Pas 1: Fixeu els suports de TV al televisor

1. Col·loqueu amb cura el televisor cara avall sobre una superfície suau i neta per evitar que es facin malbé la pantalla.
2. Identifiqueu els forats de muntatge VESA a la part posterior del vostre televisor.
3. Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's mounting holes. Ensure the screws are not too long, which could damage internal components, or too short, which would not provide a secure fit.
4. Attach the VESA plate of the wall mount to the back of your TV using the selected hardware. Tighten securely, but do not overtighten.

Image 5.1: The VESA plate of the mount, which attaches to the TV.

Step 2: Mark Drilling Holes on the Wall

1. Determineu l'alçada desitjada per al vostre televisor. Tingueu en compte viewing angles and furniture placement.
2. Hold the wall plate portion of the mount against the wall at the desired height. Use a level to ensure it is perfectly horizontal.
3. Marqueu els llocs de perforació a través dels forats de la placa de paret amb un llapis.
4. For wood stud installation, use a stud finder to locate the center of a wood stud and ensure at least two mounting holes align with the stud.

Step 3: Drill Holes and Install Wall Plate

1. Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the anchors/screws provided.
2. For concrete/brick walls, insert the plastic wall anchors into the drilled holes. Tap gently with a hammer until flush with the wall surface.
3. Position the wall plate over the drilled holes and secure it to the wall using the provided screws and washers. Tighten all screws firmly to ensure the wall plate is securely fastened.

Pas 4: Muntar el televisor a la placa de paret

1. With assistance, carefully lift the TV (with the VESA plate attached) and align the VESA plate with the arm extending from the wall plate.
2. Slide the VESA plate onto the arm until it clicks into place or can be secured with the provided locking mechanism (if applicable).
3. Double-check that the TV is securely attached to the wall mount before releasing això.

6. Funcionament de la muntura

This wall mount allows for tilting adjustments to achieve your preferred viewangle de ing.

• Inclinació: The mount allows for a tilt range of +/- 15 degrees. To adjust the tilt, gently push or pull the top or bottom of your TV to the desired angle. The friction mechanism will hold the TV in place.

Image 6.1: Diagram illustrating the +/- 15 degree tilt capability of the mount.

7. Manteniment

• Neteja: Netegeu el suport amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Comprovacions periòdiques: Regularly inspect the mount and all fasteners to ensure they remain tight and secure. If any components appear loose or damaged, tighten them or replace them immediately.
• Lubricació: The articulating joints are designed for smooth movement. No lubrication is typically required.

8. Solució De Problemes

• El televisor no està anivellat: Ensure the wall plate was installed level. If not, remove the TV, loosen the wall plate screws, adjust with a level, and re-tighten.
• La muntura se sent fluixa: Check all screws securing the mount to the wall and the TV to the mount. Tighten any loose fasteners. Do not overtighten.
• Difficulty tilting the TV: Ensure no cables are obstructing the movement. The tilt mechanism is designed to hold position, so some resistance is normal. If it's excessively stiff, check for any debris in the joint.
• Mounting screws do not fit TV: Refer to your TV's manual for correct VESA screw sizes. The provided hardware kit includes common sizes, but some TVs may require specific screws.

9. Informació de la garantia

This Techly Tilting Wall Mount comes with a 2 any de garantia from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

10. Atenció al client

For technical assistance, missing parts, or warranty inquiries, please contact Techly customer support. Refer to the product packaging or the official Techly weblloc web per obtenir la informació de contacte més actualitzada.