Introducció
Thank you for choosing the Philips AquaTouch AT899/16 Electric Shaver. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new shaver. Please read these instructions carefully before first use and keep them for future reference.
Informació de seguretat
ADVERTIMENT:
- Always unplug the shaver before cleaning or performing any maintenance.
- No utilitzeu l'afaitadora mentre s'està carregant.
- Keep the charging port dry to prevent electrical hazards.
- Clean the shaver after each use to prevent bacterial growth and maintain hygiene.
- Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.
Producte acabatview
The Philips AquaTouch AT899/16 is a rotary electric shaver designed for both wet and dry shaving. Its key features include:
- Aquatec Seal: Enables a refreshing wet shave with foam or gel, or a convenient dry shave.
- Fulles ComfortCut: Engineered to glide smoothly over the skin for a close and comfortable shave.
- Dynamic Contour Response: Shaver heads flex to follow the curves of your face and neck.
- Integrated Pop-up Trimmer: For precise trimming of sideburns and mustache.
Imatge: Frontal view of the Philips AquaTouch AT899/16 Electric Shaver, showcasing its ergonomic design and rotary shaving heads.
Image: Close-up of the shaver head demonstrating its flexing capability to adapt to facial contours.
Image: Detail of the shaver's indicator lights, showing battery status and cleaning reminder.
Configuració
Before using your shaver for the first time, ensure it is fully charged. Refer to the 'Charging' section for instructions.
- Càrrec inicial: Charge the shaver for at least 8 hours before its first use to ensure optimal battery life.
- Check Shaving Heads: Ensure the shaving heads are securely attached and free from any debris.
Instruccions de funcionament
Afaitat sec
- Assegureu-vos que la vostra cara estigui neta i seca.
- Press the on/off button to switch on the shaver.
- Move the shaver in small, circular motions over your skin.
- Estireu la pell amb la mà lliure perquè els cabells s'aixequin dret.
Afaitat humit
The Aquatec seal allows for a comfortable wet shave.
- Wet your face and apply shaving foam or gel.
- Press the on/off button to switch on the shaver.
- Move the shaver in small, circular motions over your skin.
- Rinse the shaving heads under running water during shaving to prevent clogging.
Image: The Philips AquaTouch AT899/16 shaver covered in water droplets, illustrating its wet-use capability.
Image: A man using the Philips AquaTouch AT899/16 electric shaver on his face.
Ús del retallador emergent
- Slide the trimmer release button to activate the pop-up trimmer.
- Use the trimmer to shape sideburns, mustache, or trim longer hairs before shaving.
- After use, push the trimmer back into its closed position.
Carregant
The shaver is powered by a rechargeable Lithium-ion battery.
- Assegureu-vos que l'afaitadora estigui apagada.
- Insert the small plug of the charger into the shaver's charging socket.
- Connecteu l'adaptador a una presa de corrent.
- El llum indicador de càrrega s'il·luminarà per indicar que l'afaitadora s'està carregant.
- A full charge takes approximately 8 hours and provides up to 50 minutes of shaving time.
Manteniment
Neteja
Una neteja regular garanteix un rendiment i una higiene òptims.
- After each use, switch off the shaver and unplug it from the power outlet.
- Open the shaving unit by pressing the release button.
- Rinse the shaving unit thoroughly under warm running water.
- You can also rinse the individual shaving heads.
- Shake off excess water and allow the shaving unit to air dry before closing.
Image: The Philips AquaTouch AT899/16 shaver head being rinsed under running water for cleaning.
Replacing Shaving Heads
For optimal shaving performance, replace the shaving heads every two years.
- Switch off the shaver and unplug it.
- Open the shaving unit.
- Remove the retaining frame by turning the lock counter-clockwise.
- Take out the old shaving heads.
- Insert new Philips replacement shaving heads (e.g., SH50/50).
- Place the retaining frame back and turn the lock clockwise until it clicks into place.
Image: Close-up of the ComfortCut blades with an icon indicating a recommended replacement every 2 years.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Shaver does not switch on. | Battery is empty or shaver is plugged in. | Charge the shaver. Ensure it is unplugged before attempting to switch on. |
| Mal rendiment d'afaitat. | Shaving heads are dirty or worn out. | Clean the shaving heads thoroughly. Replace shaving heads if they are older than two years. |
| Shaver pulls hairs. | Shaving heads are worn or shaver is not fully charged. | Charge the shaver fully. Replace shaving heads if necessary. |
| L'indicador de càrrega no s'encén. | El carregador no està connectat correctament o està defectuós. | Check connections. Try a different power outlet. Contact customer support if issue persists. |
Especificacions
- Número de model: AT899 / 16
- Marca: PHILIPS
- Font d'alimentació: Funciona amb bateria (recarregable)
- Tipus de bateria: 1 bateria de liti-ió (inclosa)
- Sistema d'afaitar: Rotary heads, ComfortCut blades
- Material de la fulla: Acer inoxidable
- Nombre de fulles: 3
- Característica especial: Wet & Dry use
- Color: Negre
- Dimensions (L x A x A): 7.01 x 14 x 22.4 cm
- Pes: 210 grams
- País d'origen: Països Baixos
Garantia i Suport
This Philips product comes with a standard manufacturer's warranty. For detailed warranty information, product registration, or technical support, please visit the official Philips weblloc web o poseu-vos en contacte amb el servei d'atenció al client de la vostra regió.
Podeu trobar més informació i suport a Philips Brand Store.