1. Introducció i finalview
This manual provides instructions for the FAAC TM 433-2 remote control, designed for operating gate systems. This device transmits at a frequency of 433.92 MHz and features two control buttons. It is supplied with the necessary battery and programming instructions to ensure a simple setup process.
Imatge 1.1: Frontal view of the FAAC TM 433-2 Remote Control. The remote is black with two distinct buttons.
2. Configuració
2.1 Instal·lació de la bateria
The FAAC TM 433-2 remote control uses one 12V (23A) alkaline battery. The battery is included with the remote control.
- Obriu amb cura el comandament a distància casing. Refer to the specific instructions provided with your remote for the exact method of opening, as this may vary.
- Localitzeu el compartiment de la bateria.
- Insert the 12V (23A) battery, ensuring the correct polarity (+ and -) is observed.
- Tanqueu el comandament a distància casing de manera segura.
2.2 Programació del comandament a distància
This remote control utilizes a switch-based programming method. Detailed programming instructions are included with your product. The process is designed to be straightforward and does not require specialized equipment.
Generally, programming involves matching the internal switches of the new remote to those of an existing, working remote or the receiver unit. Please consult the specific programming guide provided with your FAAC TM 433-2 for precise steps.
3. Instruccions de funcionament
The FAAC TM 433-2 remote control features two buttons for operating your gate system. The maximum operational range is approximately 40 meters, though this can be affected by environmental factors and obstacles.
- To Open/Close the Gate: Press one of the two buttons on the remote control. The specific function of each button (e.g., open, close, stop, pedestrian access) depends on how your gate system and remote were programmed.
- Interval: For optimal performance, operate the remote within 40 meters of the receiver and ensure a clear line of sight if possible.
4. Manteniment
4.1 Substitució de la bateria
When the remote control's range decreases significantly or it stops responding, the battery may need replacement. Follow the battery installation steps (Section 2.1) to replace the 12V (23A) battery.
4.2 Neteja
To clean the remote control, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
5. Solució De Problemes
If your FAAC TM 433-2 remote control is not functioning as expected, consider the following:
- El comandament a distància no respon: Comproveu la bateria. Substituïu-la si cal (vegeu la secció 4.1).
- Interval reduït: This often indicates a low battery. Replace the battery. Ensure there are no new obstructions between the remote and the gate receiver.
- Gate not responding to button press: Verify that the remote is correctly programmed to your gate system. If unsure, refer to the programming instructions (Section 2.2) or consult your gate system's manual.
- Interferència: Other radio frequency devices nearby may cause temporary interference. Try operating the remote from a different position.
6. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | TM433DS-2 |
| Marca | FAAC |
| Freqüència | 433.92 MHz |
| Nombre de botons | 2 |
| Tipus de bateria | 1 x 12V (23A) Alkaline |
| Dimensions (L x A x A) | 5 mm x 7 mm x 2 mm |
| Interval màxim | 40 metres |
| Tecnologia de connectivitat | Freqüència de ràdio |
| Color | Negre |
| Característica especial | Ergonòmic |
7. Garantia i Suport
7.1 Informació de la garantia
The FAAC TM 433-2 remote control comes with a 1-year warranty. Availability of spare parts is also guaranteed for 1 year.
7.2 Atenció al client
For further assistance, technical support, or warranty claims, please contact your FAAC product retailer or the official FAAC customer service channels. Ensure you have your product model number (TM433DS-2) and proof of purchase available when seeking support.