Manuals+

First Alert FABCU1G

First Alert Bark Genie Automatic Bark Control Device User Manual

Model: FABCU1G

Introducció

This manual provides instructions for the proper setup, operation, and maintenance of your First Alert Bark Genie Automatic Bark Control Device. Please read this manual thoroughly before using the device to ensure safe and effective operation.

The First Alert Bark Genie Automatic Bark Control Device is designed to deter excessive barking in dogs by emitting a safe, ultrasonic sound that is audible only to dogs. This device can be used both indoors and outdoors.

Informació de seguretat

  • This device is intended for use with dogs only.
  • Mantenir fora de l'abast dels nens.
  • Do not immerse the device in water. While weatherproof, it is not designed for submersion.
  • The ultrasonic sound is generally harmless to humans and most animals, but prolonged exposure at close range may be uncomfortable for some individuals.
  • The effectiveness of the ultrasonic sound correction may vary among individual dogs. Some dogs may not respond to the device.
  • Ensure the device is placed in a location where the ultrasonic sound can effectively reach the dog without obstruction.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

  • First Alert Bark Genie Automatic Bark Control Device (Model FABCU1G)
  • Manual d'usuari (aquest document)
  • (Battery not included, typically requires one 9-volt battery)

Configuració

1. Alimentació del dispositiu

The Bark Genie device operates on a 9-volt battery (not included). To install the battery:

  1. Locate the battery compartment cover on the back or bottom of the device.
  2. Obriu la coberta del compartiment.
  3. Insert a fresh 9-volt alkaline battery, ensuring correct polarity (+/-).
  4. Tanqueu bé la tapa del compartiment de la bateria.

Alternatively, an AC adapter (not included) can be used for continuous power. Refer to the manufacturer's recommendations for compatible AC adapters.

2. Col·locació

Optimal placement is crucial for the device's effectiveness. Consider the following:

  • Place the device within 50 feet of the area where your dog typically barks excessively.
  • Ensure the front of the device, where the ultrasonic emitter is located, faces the dog and is not obstructed by furniture, walls, or dense foliage.
  • For outdoor use, place the device in a location protected from direct heavy rain or extreme weather, despite its weatherproof design.
  • The device can be placed on a flat surface, mounted on a wall, or hung using the integrated handle.
First Alert Bark Genie device on a wooden table indoors, with a dog blurred in the background.

Image: The First Alert Bark Genie Automatic Bark Control Device placed on a wooden table, demonstrating typical indoor placement. A dog is visible in the background, out of focus.

First Alert Bark Genie device mounted on a wooden fence outdoors, with a house in the background.

Image: The First Alert Bark Genie Automatic Bark Control Device attached to a wooden fence post in an outdoor setting, illustrating outdoor placement options.

Instruccions de funcionament

1. Ajust dels nivells de sensibilitat

The device features 3 adjustable levels of sensitivity to detect barking. A higher sensitivity setting means the device will trigger more easily with softer or more distant barks.

  1. Locate the sensitivity switch or dial on the device.
  2. Select the desired sensitivity level:
    • Baix: For loud barks or close proximity.
    • Mitjà: Standard setting for most situations.
    • Alt: For softer barks or greater distance.
  3. Test the setting by having your dog bark (or simulating a bark) to ensure the device responds appropriately. A small indicator light may flash when the ultrasonic sound is emitted.
Davant view of the First Alert Bark Genie Automatic Bark Control Device, showing the ultrasonic emitter and microphone.

Imatge: Primer pla frontal view of the First Alert Bark Genie device, highlighting the ultrasonic emitter and microphone for bark detection.

2. Funcionament

Once powered and placed, the device operates automatically:

  • When the device detects barking within its range and sensitivity setting, it will emit a high-frequency ultrasonic sound.
  • This sound is designed to be startling and unpleasant to dogs, interrupting their barking behavior.
  • The sound is typically inaudible to humans.
  • The device will stop emitting the sound once the barking ceases.

Note: Consistency is key. For best results, ensure the device is always active when you wish to deter barking.

Manteniment

1. Neteja

  • Netegeu el dispositiu amb un drap suau i sec.
  • No utilitzeu netejadors ni dissolvents abrasius, ja que poden danyar el casing o components interns.
  • Ensure the microphone and ultrasonic emitter are free from dust or debris for optimal performance.

2. Substitució de la bateria

Replace the 9-volt battery when the device's performance diminishes or if the indicator light (if present) suggests low battery. Follow the battery installation steps in the "Setup" section.

Resolució de problemes

ProblemaCausa possibleSolució
Device does not activate when dog barks.
  • Bateria baixa o esgotada.
  • La configuració de sensibilitat és massa baixa.
  • Dog is out of range or obstructed.
  • Microphone is blocked.
  • Substitueix la pila de 9 volts.
  • Augmentar el nivell de sensibilitat.
  • Relocate the device closer to the dog or remove obstructions.
  • Clean the microphone area.
Device activates too frequently or without barking.
  • La configuració de sensibilitat és massa alta.
  • Other loud noises are triggering the device.
  • Reduir el nivell de sensibilitat.
  • Relocate the device away from noise sources.
Dog does not respond to the device.
  • Some dogs may not be receptive to ultrasonic correction.
  • Hearing impairment in the dog.
  • Ensure proper placement and sensitivity.
  • Consult a veterinarian to check your dog's hearing.
  • Consider alternative training methods if the device is ineffective.

Especificacions

  • Model: FABCU1G
  • Marca: Primera alerta
  • Dimensions (LxWxH): 6 x 3.75 x 7 polzades (aproximat, basat en les dimensions del producte)
  • Pes: 0.69 Pounds (approximate, without battery)
  • Material: Plàstic
  • Font d'alimentació: 9-volt battery (not included) or compatible AC adapter (not included)
  • Interval efectiu: Fins a 50 peus (aproximadament)
  • Nivells de sensibilitat: 3 nivells ajustables
  • Resistència a la intempèrie: Weatherproof (not submersible)

Garantia i Suport

For warranty information or technical support, please refer to the contact information provided with your purchase documentation or visit the official First Alert weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

For additional assistance, you may contact First Alert customer service.