1. Introducció
This manual provides essential information for the safe installation, operation, and maintenance of your Philips 28096-6 17W Fluorescent LampLlegiu atentament aquestes instruccions abans d'utilitzar-les i conserveu-les per a futures consultes.
The Philips 28096-6 is a 17-watt fluorescent lamp designed for general lighting applications. It features a 5000 Kelvin color temperature, providing a cool white light, and has a color rendering index (CRI) of 82, ensuring good color perception. The average lifespan of this lamp és de 30,000 hores.
2. Informació de seguretat
WARNING: To reduce the risk of electric shock, fire, or injury, always follow these safety precautions.
- Desconnecteu l'alimentació: Always turn off the power at the circuit breaker or fuse box before installing, removing, or servicing the lamp.
- Fixació adequada: Utilitzeu aquesta lamp only in fixtures designed for fluorescent lamps of the specified wattage and type (T8).
- Manejar amb cura: Fluorescent lamps contain a small amount of mercury. Handle with care to avoid breakage. In case of breakage, ventilate the area and clean up carefully according to local regulations.
- Eliminació: Eliminar l'usatamps according to local environmental regulations. Do not dispose of in regular household waste.
- Evita el contacte: No toqueu la lamp amb les mans mullades.
- Només per a ús interior: Aquesta lamp is intended for indoor use in dry locations unless otherwise specified by the fixture.
3. Configuració i instal·lació
Follow these steps to install your Philips 28096-6 fluorescent lamp:
- Apagueu l'alimentació: Ensure the power supply to the fixture is completely turned off at the circuit breaker or fuse box.
- Elimina la L antigaamp (si escau): Gireu amb cura la vella l fluorescentamp 90 graus i estireu-lo suaument fora de la lamptitulars.
- Insereix una nova Lamp: Align the pins of the new Philips 28096-6 lamp amb les ranures a la lampsuports. Premeu suaument la lamp a la lampholders until the pins are fully seated, then twist the lamp 90 degrees to lock it into place. Ensure the lamp està ben assegut.
- Restaura l'alimentació: Un cop lamp is securely installed, restore power to the fixture from the circuit breaker or fuse box.
- Prova: Engegueu l'interruptor de la llum per comprovar el funcionament correcte.
Figure 1: Philips 28096-6 17W Fluorescent Lamp. This image shows the tubular shape and pin connectors typical of a T8 fluorescent lamp.
4. Instruccions de funcionament
The Philips 28096-6 fluorescent lamp operates immediately upon receiving power from a compatible fixture. Simply use the wall switch or fixture control to turn the light on or off.
Aquesta lamp is designed for consistent performance over its rated lifespan when used within its specified operating conditions.
5. Manteniment
Minimal maintenance is required for the Philips 28096-6 fluorescent lamp.
- Neteja: Ensure the power is off before cleaning. Gently wipe the lamp amb un to suau, sec o lleugerament damp cloth to remove dust. Do not use abrasive cleaners or solvents.
- Substitució: Substituïu la lamp when it reaches the end of its useful life (indicated by flickering, dimming, or failure to light). Follow the installation steps in Section 3 for replacement.
6. Solució De Problemes
If your Philips 28096-6 lamp no funciona correctament, tingueu en compte el següent:
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'il·lumina. |
|
|
| Lamp parpelleja. |
|
|
7. Especificacions
Detailed specifications for the Philips 28096-6 17W Fluorescent Lamp:
- Número de model: 28096-6
- Wattage: 17 watts
- Tipus de llum: Fluorescent
- Mida de la forma del bulb: T8
- Característica especial: F17T8/TL850 ALTO Plus Straight T8
- Temperatura de color: 5000 Kelvin (blanc fred)
- Índex de reproducció del color (CRI): 82
- Brillantor: 1235 lúmens
- Vida mitjana: 30,000 hores
- Dimensions del producte: Aproximadament 24 x 1.25 x 1.25 polzades
- Pes de l'article: 3.2 unces
- Mètode de control: Aplicació (Note: This refers to smart home integration capabilities of some systems, not the bulb itself. The bulb is controlled by a standard switch.)
Figura 2: Example of an energy efficiency label, often associated with lighting products, indicating performance metrics.
8. Garantia i Suport
Per obtenir informació sobre la garantia i l'assistència al client, consulteu la pàgina oficial de Philips. weblloc web o contacteu amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra.
Philips Customer Service: For technical assistance or product inquiries, please visit the Philips support website or contact their customer service line (details typically found on product packaging or the official Philips weblloc).