Microlife 3AG1 Blood Pressure Monitor User Manual

1. Introduction and Important Safety Information

Thank you for choosing the Microlife 3AG1 Blood Pressure Monitor. This device is designed for accurate and reliable measurement of blood pressure and pulse rate at home. It utilizes the oscillometric measuring method and fuzzy logic technology for precise readings. Please read this manual thoroughly before using the device to ensure proper operation and to understand all safety precautions.

Notes importants de seguretat:

• Consulteu el vostre metge abans d'utilitzar aquest dispositiu si teniu alguna afecció mèdica.
• Do not self-diagnose or self-medicate based on blood pressure measurements. Always consult a healthcare professional.
• Mantingueu el dispositiu fora de l'abast dels nens.
• Do not use the device in a moving vehicle or on an airplane.
• Avoid using the device near strong electromagnetic fields.

2. Producte acabatview

The Microlife 3AG1 Blood Pressure Monitor consists of the main unit with a display and control buttons, and an arm cuff. Understanding these components is essential for correct usage.

Imatge 1: The Microlife 3AG1 Blood Pressure Monitor, showing the main digital display unit and the attached arm cuff. This image illustrates the overall appearance of the device.

Unitat principal: Contains the digital display, START/STOP button, and memory buttons. It processes the measurements and displays the results.

Maneguet del braç: Designed for upper arm placement, it inflates to measure blood pressure and pulse. The cuff is connected to the main unit via an air tube.

3. Configuració

3.1 Instal·lació de la bateria

The Microlife 3AG1 operates on batteries. Ensure fresh batteries are installed correctly before first use.

1. Obriu la tapa del compartiment de la bateria a la part posterior de la unitat principal.
2. Insert the required number of batteries (typically AA size, refer to the compartment for exact type and quantity) according to the polarity indicators (+ and -).
3. Tanqueu bé la tapa del compartiment de la bateria.
4. The battery check function will indicate battery status on the display. Replace batteries when the low battery indicator appears.

3.2 Fixació del maneguet

La col·locació correcta del maneguet és crucial per a unes lectures precises.

1. Connect the air tube from the cuff securely into the air jack on the side of the main unit.
2. Place the cuff on your bare upper arm, approximately 2-3 cm above the elbow joint. The artery mark on the cuff should align with your brachial artery (inner side of the arm).
3. Ensure the cuff is snug but not too tight. You should be able to fit two fingers comfortably under the cuff.
4. The bottom edge of the cuff should be about 2 cm above the elbow.

4. Instruccions de funcionament

4.1 Prendre una mesura

The Microlife 3AG1 features one-touch operation for ease of use.

1. Seieu còmodament amb l'esquena recolzada i els peus ben plans a terra. Recolzeu el braç sobre una taula de manera que el maneguet quedi a l'alçada del cor.
2. Romandre quiet i en silenci durant la mesura.
3. Premeu el botó INICI/PARA botó. El braçalet s'inflarà automàticament.
4. The device will detect your pulse and measure your blood pressure using the oscillometric method with fuzzy logic.
5. Un cop finalitzada la mesura, el maneguet es desinflarà i es mostraran la pressió sistòlica, la pressió diastòlica i la freqüència cardíaca.
6. Premeu el botó INICI/PARA button again to turn off the device, or it will automatically switch off after approximately one minute of inactivity.

4.2 Funció de memòria

The device stores previous measurements for tracking your blood pressure over time.

• To recall stored measurements, press the M (Memory) button when the device is off.
• Cada premsa de la M button will cycle through the stored readings, displaying the most recent first.
• The number of stored readings may vary; refer to the display for the current memory index.

5. Manteniment i cura

Proper care ensures the longevity and accuracy of your blood pressure monitor.

• Neteja: Clean the main unit and cuff with a soft, dry cloth. If necessary, use a cloth lightly dampened with water or a mild detergent. Do not use abrasive cleaners or immerse the device in water.
• Emmagatzematge: Store the device in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity. Keep it in its original packaging or a protective case when not in use.
• Substitució de la bateria: Replace all batteries at the same time when the low battery indicator appears. Do not mix old and new batteries or different types of batteries.
• Cura del maneguet: The cuff is a delicate component. Avoid bending or creasing the air tube excessively. Do not wash the cuff in a washing machine.

6. Solució De Problemes

If you encounter issues with your Microlife 3AG1, refer to the following common problems and solutions. The device also features an error code display for specific issues.

• El dispositiu no s'encén:
  • Comproveu si les bateries estan instal·lades correctament.
  • Replace with new batteries if they are depleted.
• Error Code (e.g., 'Err 1', 'Err 2'):
  • Error 1: Cuff not applied correctly or air leakage. Re-apply cuff and ensure tube is securely connected.
  • Error 2: Movement or talking during measurement. Remain still and silent during the process.
  • Error 3: Irregular pulse detected. Repeat measurement after a few minutes of rest. If it persists, consult a doctor.
  • Error 4: Cuff pressure too high or too low. Ensure cuff size is appropriate for your arm and applied correctly.
• Lectures inexactes:
  • Ensure proper cuff placement and size.
  • Avoid caffeine, alcohol, or exercise 30 minutes before measurement.
  • Rest for 5 minutes before taking a measurement.
  • Ensure the arm is at heart level.

If problems persist after following these steps, please contact Microlife customer support.

7. Especificacions

8. Garantia i Suport

The Microlife 3AG1 Blood Pressure Monitor comes with a Garantia del fabricant de 3 anys des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

La garantia no cobreix:

• Damage caused by improper use or failure to follow instructions.
• Damage caused by accidents, abuse, or unauthorized alterations.
• Normal wear and tear of components, such as the cuff.

For warranty claims, technical support, or any questions regarding your device, please contact Microlife customer service. Refer to the contact information provided with your product packaging or visit the official Microlife weblloc web per obtenir detalls de suport regional.