Model: VP888200
The VEMER Logik Micro DW VP888200 is a compact digital daily and weekly timer switch designed for precise management of electrical loads. This device features a modular 1 DIN unit design, an LCD display, and supports up to 20 ON/OFF or impulse programs with a 1-minute resolution. It is ideal for automating various electrical circuits in residential or commercial settings.
Llegiu atentament aquestes instruccions de seguretat abans de la instal·lació i el funcionament. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o danys al dispositiu.
The VEMER Logik Micro DW is a compact digital timer switch designed for DIN rail mounting. It features a clear LCD display for programming and status indication.
The following image illustrates the front and side dimensions of the Logik Micro DW, along with its electrical wiring diagram.
Descripció de la imatge: This image displays three views of the VEMER Logik Micro DW VP888200. On the left, the "Vista frontale" (Front view) shows the device's height as 88mm and width as 18mm. In the center, the "Vista laterale" (Side view) indicates a depth of 60mm and a DIN rail clip height of 45mm. On the right, the "Schema" (Wiring Diagram) illustrates the electrical connections: L (Line) and N (Neutral) inputs, and the relay contacts labeled 1, 2, 3, 4, 5, 6. The diagram shows the internal relay switching between contacts for load control.
En el moment de l'engegada inicial o després d'una apagada prolongadatage, the display may show default settings or require time synchronization.
The Logik Micro DW allows for daily and weekly programming of electrical loads.
The device supports up to 20 ON/OFF programs. Each program consists of an ON time and an OFF time.
The programming resolution is 1 minute, allowing for precise control.
The device also supports impulse programming, where the relay briefly activates for a set duration.
The device typically includes a manual override function to temporarily switch the load ON or OFF independently of the programmed schedule. Consult the device's physical buttons or display menu for this function.
To clean the device, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray liquids directly onto the device.
The Logik Micro DW features a rechargeable lithium battery that provides a power reserve of approximately 3 years. This reserve maintains the time and programmed settings during power outages. The relay will only switch in the presence of mains power.
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc. | No power supply to the device. | Check the main circuit breaker and wiring connections (L and N terminals). |
| Programs are not executing. | Incorrect time/day setting; Programs not saved; Manual override active; Power outage. | Verify current time and day. Re-enter and save programs. Check manual override status. Ensure continuous power supply. |
| Load does not switch ON/OFF. | Incorrect wiring of the load; Exceeded load capacity; Faulty load. | Verify load wiring according to the diagram. Ensure load current does not exceed 16A. Test the load independently. |
| Time drifts or resets frequently. | Low internal battery reserve. | Ensure the device is continuously powered for several hours to allow the internal battery to recharge. If the issue persists after prolonged charging, the device may require service. |
| Característica | Detall |
|---|---|
| Model | VP888200 |
| Font d'alimentació | 230 V AC ± 10% (50/60 Hz) |
| Sortida | 1 changeover relay (1 NO/NC contact) |
| Valoració de contacte | 16 A at 250 V AC (cos(Φ)=1) |
| Nombre de programes | 20 programes d'encesa/apagada |
| Resolució de programació | 1 minut |
| Reserva d'energia | 3 years (rechargeable lithium battery) |
| Temperatura de funcionament | -10 °C to +50 °C |
| Temperatura d'emmagatzematge | -10 °C to +60 °C |
| Grau de Protecció | IP40 |
| Mostra | LCD (no backlight) |
| Muntatge | DIN rail (1 module) |
| Dimensions (A x A x P) | 88mm x 18mm x 60mm (approximate, based on diagram) |
VEMER products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official VEMER weblloc.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact VEMER customer support through their official channels. Ensure you have your product model number (VP888200) and purchase details available when contacting support.
Official VEMER Weblloc: www.vemer.it
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.