1. Introducció
Gràcies per la compraasing the A&D Waterproof Interval Timer AD-5709TL. This versatile timer is designed for various applications, from kitchen use to sports training, offering precise timing and robust features. Its IPX7 waterproof rating ensures durability in wet environments, while its multi-timer and repeat functions provide flexibility for complex timing needs. Please read this manual carefully to ensure proper use and maintenance of your device.
Figura 1.1: Frontal view of the A&D Waterproof Interval Timer AD-5709TL, displaying its digital screen and control buttons.
2. Característiques clau
- IPX7 Fully Waterproof: Designed to withstand splashes and submersion, ideal for kitchen and outdoor use.
- Funció multitemporitzador: Capable of memorizing and running up to 8 individual timer settings sequentially.
- Funció de repetició: Set the timer to repeat from 1 to 999 times, or for an indefinite duration.
- Notificació d'alarma dual: Alerts with both a red LED light (blinks for approx. 30 seconds) and a buzzer sound (5 or 30 seconds duration).
- Countdown & Count-up Modes: Functions as a countdown timer for set intervals and a count-up timer from zero.
- Funció de memòria: Stores frequently used timer settings for quick recall.
- Suport magnètic: Equipped with a magnet for convenient attachment to metal surfaces.
Figure 2.1: The timer's magnetic backing allows for easy attachment to metal surfaces, as shown with paper clips.
Figure 2.2: The timer is shown submerged in water, highlighting its IPX7 waterproof rating for use in wet environments.
3. Configuració
3.1. Contingut del paquet
- A&D Waterproof Interval Timer AD-5709TL
- Manual d'instruccions
- CR2032 Lithium Battery (for monitor use)
3.2. Instal·lació de la bateria
The timer uses one CR2032 lithium battery. A battery is included for initial monitoring purposes. For long-term use, it is recommended to replace it with a new battery.
- Localitza el compartiment de les piles a la part posterior del temporitzador.
- Use a coin or a flat tool to twist the battery cover counter-clockwise to open.
- Introduïu la pila CR2032 amb el costat positiu (+) cap amunt.
- Replace the battery cover and twist clockwise to secure it.
Figura 3.1: posterior view of the timer, illustrating the battery compartment and the CR2032 battery for installation.
3.3. Engegada inicial
Once the battery is correctly installed, the timer will automatically power on and display '00:00'.
4. Funcionament
4.1. Funcions del botó
| Botó | Funció |
|---|---|
| 1分 (1 Minute) | Adds 1 minute to the timer setting. |
| 10秒 (10 Seconds) | Adds 10 seconds to the timer setting. |
| 10分 (10 Minutes) | Adds 10 minutes to the timer setting. |
| スタート/ポーズ (Start/Pause) | Inicia o posa en pausa el temporitzador. |
| ストップ (Stop) | Stops the timer and resets it to the last set time or zero. |
| メモリ (Memory) | Recalls stored timer settings. |
| リセット (Reset) | Resets the timer to 00:00. (Often combined with Stop or a long press of Stop) |
4.2. Configuració d'un temporitzador de compte enrere
- Ensure the timer display is '00:00'. If not, press the Atureu-vos botó per reiniciar.
- Utilitza el 1分, 10秒, i 10分 buttons to set your desired countdown time. The maximum setting is 99 minutes 50 seconds, and the minimum is 10 seconds.
- Premeu el botó スタート/ポーズ botó per iniciar el compte enrere.
- Per aturar el compte enrere, premeu スタート/ポーズ de nou. Premeu-lo una vegada més per reprendre.
- When the timer reaches zero, the alarm will sound (buzzer for 5 or 30 seconds) and the red LED will blink for approximately 30 seconds.
- Premeu el botó Atureu-vos button to silence the alarm and reset the timer to the last set time.
4.3. Using Multiple Timers (Sequential Operation)
The AD-5709TL can store and run up to 8 sequential timer settings. This is ideal for interval training or multi-step processes.
- Set the first timer duration using the 1分, 10秒, i 10分 botons.
- Premeu el botó メモリ button to save this setting as Step 1. The display will show '00:00' or the next step number.
- Repeat the process to set and save up to 8 steps. Each time you press メモリ, it saves the current setting and moves to the next step number.
- Once all steps are set, press スタート/ポーズ to begin the sequence. The timer will count down each step consecutively.
- The alarm will sound after each step completes, and the timer will automatically proceed to the next step.
Figura 4.1: Example of sequential timer operation with multiple steps and repeat functionality.
4.4. Repetiu la funció
After setting your sequential timers (or a single timer), you can set the number of times the sequence should repeat.
- After setting your timer steps (as described in 4.3), press the メモリ button repeatedly until the display shows the repeat count setting (e.g., 'RPT 001').
- Utilitza el 1分, 10秒, i 10分 buttons to adjust the repeat count from 1 to 999.
- To set for permanent (infinite) repeat, continue pressing the buttons until 'RPT INF' or similar is displayed.
- Premeu スタート/ポーズ to start the repeating timer sequence.
4.5. Count-up Function
To use the count-up function:
- Ensure the timer display is '00:00'.
- Premeu el botó スタート/ポーズ button. The timer will immediately start counting up from 00 minutes 00 seconds.
- Premeu スタート/ポーズ again to pause the count-up.
- Premeu el botó Atureu-vos button to stop the count-up and reset the display to '00:00'.
5. Manteniment
5.1. Neteja
Per netejar el temporitzador, netegeu-lo amb un drap suau iamp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water beyond its IPX7 rating. Ensure the battery compartment is securely closed before cleaning with moisture.
5.2. Substitució de la bateria
When the display becomes dim or the timer functions erratically, it's time to replace the battery. Follow the steps in Section 3.2 for battery installation. Always use a new CR2032 lithium battery.
5.3. Emmagatzematge
Store the timer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, it is recommended to remove the battery to prevent leakage.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El temporitzador no s'encén. | La bateria està morta o mal instal·lada. | Replace the battery with a new CR2032, ensuring correct polarity. |
| La pantalla està tènue o parpelleja. | Bateria baixa. | Substituïu la bateria. |
| L'alarma és massa forta. | Buzzer volume is fixed. | The buzzer volume is approximately 65dB at 15cm and cannot be adjusted. Consider using the LED alarm only if available (not a direct feature on this model, but a general suggestion). |
| Timer does not respond to button presses. | Error temporal de programari o bateria baixa. | Traieu i torneu a inserir la bateria. Si el problema persisteix, substituïu la bateria. |
| Sequential timers do not advance. | Incorrect setting or timer paused. | Ensure all steps are correctly saved using the Memory button. Check if the timer is paused. |
7. Especificacions
| Especificació | Detall |
|---|---|
| Número de model | AD-5709TL |
| Dimensions (L x A x A) | 6.8 x 6.8 x 1.6 cm |
| Pes | Aprox. 60 g |
| Color | Blanc |
| Interval de configuració | Max 99 minutes 50 seconds, Min 10 seconds |
| Nombre de temporitzadors | Up to 8 sequential timers |
| Repetiu el recompte | 1 to 999 times, or infinite |
| Alarm Duration (Buzzer) | 5 segons / 30 segons |
| Alarm Duration (LED) | Approx. 30 seconds blinking red LED |
| Volum del timbre | Approx. 65dB (at 15cm distance) |
| Rendiment impermeable | Equivalent IPX7 |
| Font d'alimentació | CR2032 Lithium Battery x 1 |
Figure 7.1: Visual representation of the timer's dimensions, weight, battery information, and alarm features.
8. Garantia i Suport
This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or inquiries, please contact A&D customer service through their official weblloc web o el distribuïdor on vau comprar el producte. Conserveu el comprovant de compra per validar la garantia.
For more information, visit the official A&D weblloc: www.aandd.co.jp
