Puig 6789W

Puig 6789W Traffic Windscreen Instruction Manual for Honda Wave 12-13

Model: 6789W

1. Introducció

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig 6789W Traffic Windscreen. This windscreen is specifically designed for Honda Wave models manufactured between 2012 and 2013. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe use of the product.

2. Informació de seguretat

Always prioritize safety when working on your motorcycle. Failure to follow these safety guidelines may result in injury or damage to the product or motorcycle.

  • Ensure the motorcycle is stable and on a level surface before starting installation.
  • Utilitzeu equips de protecció individual adequats, com ara guants i ulleres de protecció.
  • Do not overtighten fasteners, as this can strip threads or crack components. Refer to torque specifications if available.
  • Regularly inspect the windscreen and mounting hardware for any signs of wear, damage, or looseness.
  • If you are unsure about any step of the installation process, consult a qualified motorcycle mechanic.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents i no estiguin danyats abans de continuar amb la instal·lació. Si hi ha alguna peça que falti o que estigui danyada, poseu-vos en contacte amb el vostre distribuïdor.

  • 1x Puig 6789W Traffic Windscreen (Transparent)
  • 1x Mounting Hardware Kit (brackets, bolts, washers, nuts)
  • 1x Manual d'instruccions (aquest document)
Image showing the Puig 6789W Traffic Windscreen and its associated mounting hardware.

Figure 1: The Puig 6789W Traffic Windscreen and its components.

4. Configuració i instal·lació

This section details the step-by-step process for installing the Puig 6789W Traffic Windscreen on your Honda Wave (2012-2013).

4.1. Eines necessàries

  • Conjunt de claus hexagonals
  • Conjunt de claus
  • Screwdriver (Phillips or flathead, as required)
  • Soft cloth for cleaning

4.2. Passos d'instal·lació

  1. Preparació de la motocicleta: Park the Honda Wave on a stable, level surface. Turn off the engine and remove the key.
  2. Identificar els punts de muntatge: Locate the designated mounting points on your Honda Wave's handlebars or front fairing. These are typically existing bolt holes.
  3. Assemble Brackets: Attach the provided mounting brackets to the windscreen using the smaller bolts and washers. Do not fully tighten yet.
  4. Attach to Motorcycle: Carefully position the windscreen assembly onto the motorcycle's mounting points. Use the larger bolts, washers, and nuts to secure the brackets to the motorcycle. Hand-tighten all fasteners initially.
  5. Ajust de posició: Adjust the windscreen's angle and height to your preferred riding position. Ensure it does not obstruct your view or interfere with steering.
  6. Ajustament final: Once the desired position is achieved, progressively tighten all bolts and nuts. Ensure they are secure but do not overtighten. Double-check all connections.

5. Funcionament

Once installed, the Puig 6789W Traffic Windscreen operates passively by deflecting wind and debris. No active operation is required. Before each ride, perform a quick visual inspection to ensure the windscreen is securely attached and free from damage.

6. Manteniment

Proper maintenance will extend the life and clarity of your windscreen.

  • Neteja: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material. Rinse thoroughly and dry with a clean, soft cloth.
  • Inspecció: Periodically check all mounting bolts and nuts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the windscreen for cracks, scratches, or other damage.
  • Emmagatzematge: If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.

7. Solució De Problemes

Aquesta secció tracta problemes comuns que podeu trobar.

ProblemaCausa possibleSolució
Windscreen vibrates excessivelyCargols de muntatge fluixos; instal·lació incorrecta.Check and tighten all mounting bolts. Re-evaluate installation steps.
Reduced visibility through windscreenDirt, scratches, or improper cleaning.Clean the windscreen with mild soap and water. Avoid abrasive materials. If scratched, consider replacement.
Windscreen feels loose after ridingFasteners have loosened due to vibration.Regularly inspect and tighten all mounting hardware.

8. Especificacions

CaracterísticaDetall
Número de model6789W
MarcaPuig
CompatibilitatHonda Wave (2012-2013)
ColorTransparent / Klar
MaterialPlàstic
Tipus d'instal·lacióVehicle-specific fit, Self-adhesive
Dimensions del paquet36 x 31 x 16 cm
Pes de l'article500 grams

9. Garantia i Suport

Puig products are manufactured to high standards. For information regarding warranty coverage, claims, or technical support, please refer to the official Puig website or contact your authorized Puig dealer. Keep your proof of purchase for warranty purposes.

Fabricant: Puig

Weblloc: www.puig.tv

© 2023 Puig. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.