ARREGUI D-HE/0 Electronic Safe Instruction Manual

1. Producte acabatview

The ARREGUI D-HE/0 Electronic Safe is designed to provide secure storage for your valuables at home or in the office. Constructed from reinforced steel, it features an electronic keypad for programmable access and an emergency key for backup entry. Its compact design and robust build ensure reliable protection.

• Construcció duradora: Made from steel with a 4 mm thick front door and a 2 mm thick body.
• Bloqueig segur: Features two 16 mm diameter nickel-plated steel bolts for strong closure.
• Teclat electrònic: Programmable with a 3 to 8 digit code, offering 100 million possible combinations.
• Accés d'emergència: Includes two emergency keys for use in case of forgotten codes, depleted batteries, or keypad malfunction.
• Indicador de bateria baixa: A red LED light on the keypad indicates when batteries are running low.
• Mounting Capability: Pre-drilled holes (2 in the base, 2 in the rear, 7 mm diameter) and included hardware allow for secure fastening to a wall, shelf, or floor.

2. Informació de seguretat

• Always keep the emergency keys in a secure location outside the safe. Do not store them inside the safe.
• Ensure the safe is installed on a stable surface or securely mounted to prevent tipping or unauthorized removal.
• No exposeu la caixa forta a temperatures o humitat extremes.
• Canvieu les piles immediatament quan aparegui l'indicador de bateria baixa per evitar que us bloquegeu.
• Avoid sharing your access code with unauthorized individuals.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• ARREGUI D-HE/0 Electronic Safe
• Manual d'instruccions (aquest document)
• Emergency Keys (2 units)
• Maquinari de muntatge (cargols i ancoratges)

4. Configuració

4.1 Instal·lació de la bateria

1. Localitza el compartiment de la bateria, normalment a l'interior de la porta de la caixa forta.
2. Obriu la tapa del compartiment de la bateria.
3. Insert four (4) new AA 1.5V alkaline batteries, ensuring correct polarity (+/-).
4. Tanqueu la tapa del compartiment de la bateria.
5. Test the keypad to ensure it powers on.

4.2 Muntatge de la caixa forta

While not mandatory, mounting the safe is highly recommended to enhance security and prevent theft.

1. Choose a suitable location for the safe, such as a wall, shelf, or floor.
2. Mark the positions for the mounting holes using the pre-drilled holes on the back or base of the safe as a template.
3. Perforeu forats pilot a les posicions marcades.
4. Insert the appropriate anchors into the drilled holes (if mounting into masonry or drywall).
5. Position the safe and secure it using the provided screws and mounting hardware. Ensure the safe is firmly attached.

Imatge: Frontal view of the ARREGUI D-HE/0 safe with the door open, highlighting the electronic keypad and the internal locking bolts.

Imatge: Part posterior view of the ARREGUI D-HE/0 safe, illustrating the pre-drilled holes for secure mounting.

5. Instruccions de funcionament

5.1 Configuració del vostre codi personal

The safe comes with a factory default code (check your specific manual for the default, often 1-2-3-4 or 0-0-0-0). It is crucial to change this immediately.

1. With the safe door open, press the red reset button located on the inside of the door (usually near the hinge). You will hear a beep, and a yellow light on the keypad will illuminate.
2. Enter your new 3 to 8 digit code on the keypad.
3. Press the 'E' or '#' button to confirm your new code. You will hear a confirmation beep.
4. Test the new code with the door open before closing it. Enter your new code, then turn the knob to ensure it opens.

5.2 Obrir la caixa forta amb el vostre codi

1. Enter your 3 to 8 digit personal code on the keypad.
2. Press the 'E' or '#' button. A green light will illuminate, and you will hear a beep.
3. Within 5 seconds, turn the knob clockwise (or counter-clockwise, depending on the model) to open the safe door.

5.3 Using the Emergency Key

The emergency key provides access if you forget your code, the batteries are dead, or the electronic system malfunctions.

1. Localitza el forat del pany d'emergència, normalment amagat darrere d'una petita tapa al panell del teclat.
2. Traieu la coberta.
3. Insert the emergency key into the keyhole and turn it.
4. While holding the key turned, rotate the main knob to open the safe door.
5. Once open, you can replace the batteries or reset the code as needed. Remember to remove the emergency key and store it safely.

Image: The ARREGUI D-HE/0 safe showing the emergency key inserted into its lock, ready for manual opening.

6. Manteniment

• Substitució de la bateria: Replace all four AA batteries when the red low battery indicator light illuminates. Always use new alkaline batteries.
• Neteja: Netegeu l'exterior de la caixa forta amb un drap suau iamp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat o els components electrònics.
• Gestió de codis: Periodically change your personal code for enhanced security.
• Emmagatzematge de claus: Regularly check the location of your emergency keys to ensure they are accessible but not stored inside the safe.

7. Solució De Problemes

8. Especificacions

Image: Detailed dimensions of the ARREGUI D-HE/0 safe, including external measurements and internal capacity.

9. Garantia i Suport

This ARREGUI D-HE/0 Electronic Safe comes with a 3 any de garantia des de la data de compra, que cobreix els defectes de fabricació. Conserveu el comprovant de compra per a reclamacions de garantia.

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Arregui customer support. Refer to the contact information provided on the official Arregui weblloc web o la documentació de la compra.

Visit the Arregui Store for more information