1. Introducció
Gràcies per la compraasing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your ampmés viu.
2. Informació de seguretat
- Font d'alimentació: Feu servir només l'adaptador de corrent especificat (18 V CC, negatiu central).
- Ventilació: Assegureu-vos una ventilació adequada per evitar el sobreescalfament. No obstruïu les obertures de ventilació.
- Humitat: No exposeu la unitat a la pluja, la humitat o l'excés d'humitat.
- Manipulació: Handle with care. Avoid dropping or subjecting the unit to strong impacts.
- Manteniment: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.
- Connexió de l'altaveu: Connecteu sempre el amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.
3. Producte acabatview
The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.
Controls del panell frontal
- ENTRADA: 1/4" mono jack to plug in your guitar.
- BAIX: Controls the low frequency response.
- MITJÀ: Controls the mid frequency response.
- AGUTS: Controls the high frequency response.
- GUANY: Controls the gain level.
- VOLUM: Controla el volum de sortida.
- Interruptor ON / OFF: Encén o apaga la unitat.
Connexions del panell posterior
- 18 V CC: Plug in DC 18V adapter (center negative).
- TELÈFONS/SORTIDA DE LÍNIA: 1/8" stereo jack, for using headphones or recording.
- AUX IN: 1/8" stereo jack, for connecting an external music player.
- RETORN DEL BUCLE FX: 1/4" mono jack, connect to your effects output jack.
- SORTIDA DE L'ALTAVEU: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
- ENVIAR FX LOOP: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp i poder amp).
4. Configuració
- Connect Speaker Cabinet: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the ampmés viu.
- Connectar l'alimentació: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
- Connecta la guitarra: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
- Configuració inicial: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
- Encès: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.
5. Instruccions de funcionament
- Ajust del to: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
- Ajust de guany: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
- Ajust de volum: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
- Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp secció.
- Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
- AUX IN: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.
6. Manteniment
- Neteja: Utilitzeu un drap suau i sec per netejar-lo ampl'exterior del lificador. No utilitzeu netejadors líquids ni dissolvents.
- Emmagatzematge: Emmagatzemar el amplifier in a dry, cool place away from direct sunlight and extreme temperatures.
- Cura del tub: As a hybrid amplifier, el preamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so | Power not connected, speaker not connected, volume/gain too low, faulty cable. | Check power connection, ensure speaker is connected, increase volume/gain, test with different cables. |
| So feble o distorsionat | Faulty cable, incorrect impedance, worn preamp tub. | Test cables, ensure correct speaker impedance, consult technician for tube replacement. |
| Excessive hum/noise | Bucle de terra, font d'alimentació defectuosa, interferències d'altres aparells electrònics. | Try different power outlets, use a power conditioner, move away from other electronic devices. |
8. Especificacions
- Potència de sortidatage: 5 watts
- Font d'alimentació: Corded Electric (18V DC, center negative)
- Pes de l'article: 15.5 unces
- Dimensions del producte: 2.34 x 5.03 x 2.95 polzades
- Dispositius compatibles: Guitarra
- Tipus de connector: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
- Impedància de l'altaveu: 4-16 ohms
- Número de model: TANLA2
9. Vídeos de productes
OriPure 5W Tube Guitar Amplificador Cap
Descripció del vídeo: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.
The Joyo Jackman II Is Like A Tiny Marshall JCM 800.
Descripció del vídeo: Aquest vídeo ofereix una visió detalladaview and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.
OriPure 15W Tube Guitar Amplifier Head OA-H15
Descripció del vídeo: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.
JOYO Meteor II BanTamp Sèrie XL Mini Amp Head 20 Watt
Descripció del vídeo: This video presents the JOYO Meteor II BanTamp Sèrie XL Mini Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.
Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM
Descripció del vídeo: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.
JOYO 20W Amplifier Head BanTamP Series ATOMIC
Descripció del vídeo: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.
10. Garantia i Suport
For warranty information and technical support, please refer to the official Hotone weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el rebut de compra com a comprovant de compra.