Corsair Dominator Platinum Series C11 Memory Kit (CMD16GX3M2A2400C11) User Manual

1. Introducció

This manual provides essential information for the installation, operation, and maintenance of your Corsair Dominator Platinum Series C11 Memory Kit. This high-performance DDR3 memory kit is designed for enthusiasts and professionals seeking superior speed and reliability for their Intel Z87 platform systems.

2. Informació de seguretat

Please read and follow these safety guidelines to prevent damage to your memory modules or computer system:

• Always power off your computer and disconnect it from the power source before installing or removing memory modules.
• Discharge any static electricity from your body by touching a grounded metal object (e.g., your computer's metal chassis) before handling memory modules.
• Manipuleu els mòduls de memòria per les vores per evitar tocar els contactes daurats o els circuits integrats.
• Do not apply excessive force when inserting modules into DIMM slots.
• Keep memory modules away from liquids and extreme temperatures.

3. Contingut del paquet

Your Corsair Dominator Platinum Series C11 Memory Kit package should contain the following items:

• 2 x 8GB DDR3 Memory Modules (Total 16GB Kit)

Image 1: Corsair Dominator Platinum Series C11 Memory Module (Front View)

4. Configuració i instal·lació

Follow these steps to properly install your memory modules:

1. Preparació:
   • Assegureu-vos que l'ordinador estigui apagat i desendollat ​​de la presa de corrent.
   • Open your computer case. Refer to your computer or motherboard manual for specific instructions on accessing the DIMM slots.
   • Discharge static electricity by touching a grounded metal object.
2. Localitza les ranures DIMM:
   • Identify the DDR3 DIMM slots on your motherboard. For dual-channel operation, consult your motherboard manual for the correct slot configuration (e.g., slots 2 and 4).
   • Gently push open the retention clips at both ends of the selected DIMM slots.
   

   Imatge 2: Lateral view of the memory module, showing the heat spreader and contacts.

3. Instal·leu els mòduls de memòria:
   • Hold each memory module by its edges. Align the notch on the module with the key in the DIMM slot.
   • Place the module into the slot and apply firm, even pressure to both ends until the retention clips snap into place. You should hear a click.
   • Visually inspect to ensure the module is seated correctly and the clips are fully closed.
   

   Imatge 3: Anglesa view of the memory module, highlighting the Dominator Platinum design.
4. Tanqueu la carcassa i engegueu-la:
   • Tanqueu la carcassa de l'ordinador i torneu a connectar el cable d'alimentació.
   • Enceneu l'ordinador.
5. BIOS Configuration (XMP):
   • Upon first boot, enter your system's BIOS/UEFI settings (usually by pressing DEL or F2 during startup).
   • Locate the memory settings. Enable the Intel XMP (Extreme Memory Profile) feature. This will automatically configure your memory to its rated speed (2400MHz) and timings.
   • Save changes and exit BIOS. Your system will restart with the optimized memory settings.

5. Operating Your Memory Kit

Once installed and configured, your Corsair Dominator Platinum memory kit operates automatically. The primary aspect of operation is ensuring the XMP profile is enabled in your BIOS for optimal performance. This memory is designed for the Intel Z87 platform and supports Intel XMP 1.3 for easy overclocking to its advertised speeds.

The integrated light bar provides a subtle downwash lighting effect, enhancing the aesthetic of your system.

6. Manteniment

Corsair Dominator Platinum memory modules are designed for long-term reliability and require minimal maintenance.

• Neteja: If dust accumulates on the heat spreaders, gently clean with a soft, dry, anti-static cloth. Do not use liquid cleaners.
• Manipulació: Always handle modules by their edges. Avoid touching the gold contacts or the components on the PCB.
• Medi ambient: Ensure your computer case has adequate airflow to maintain optimal operating temperatures for all components, including memory.

7. Solució De Problemes

If you encounter issues after installing your memory, consider the following troubleshooting steps:

• System Does Not Boot / No Display:
  • Ensure modules are fully seated in their DIMM slots. Re-seat them firmly.
  • Verify that the modules are installed in the correct slots according to your motherboard manual for dual-channel operation.
  • Try booting with only one module installed to identify if a specific module is faulty.
• Incorrect Memory Speed or Size Detected:
  • Enter BIOS/UEFI settings and confirm that XMP (Extreme Memory Profile) is enabled.
  • If XMP is not available or causes instability, manually set the memory frequency, timings, and voltage (1.65V) as specified in the product specifications.
• System Instability / Blue Screens:
  • Ensure your motherboard BIOS is updated to the latest version.
  • Run a memory diagnostic tool (e.g., Windows Memory Diagnostic or MemTest86) to check for errors.
  • If overclocking, try running the memory at default JEDEC speeds to rule out overclocking instability.

8. Especificacions

9. Informació de la garantia

Corsair memory products are backed by a limited lifetime warranty. For detailed information regarding warranty terms, conditions, and the return process, please refer to the official Corsair website or contact Corsair customer support directly.

10. Suport

For further assistance, technical support, or to download the latest drivers and software (if applicable), please visit the official Corsair support weblloc:

Suport de Corsair Weblloc