Producte acabatview
The Rectorseal G-O-N Downspout Nozzle is a cast nickel brass component designed to manage water drainage from downspouts, preventing excess standing water and potential foundation damage. It features a threaded and sealed PVC insert for direct installation onto PVC drain pipes, ensuring a secure and efficient connection. The nozzle includes an anti-theft escutcheon and a durable nickel brass finish for a professional appearance.
Image: The Rectorseal 82700 G-O-N Glue-On Downspout Nozzle in 2-inch bronze, showcasing el seu disseny i acabat.
Característiques principals:
- Aplicació: Designed to reduce excess standing water from downspouts, protecting foundations.
- Fàcil instal·lació: Installs directly onto PVC drain pipes with an integral PVC insert.
- Durabilitat: Constructed from cast nickel brass with a nickel brass finish and an anti-theft escutcheon.
- Versatilitat: Available in various sizes (2-inch to 12-inch) to accommodate different roof drainage systems.
Components inclosos
The Rectorseal 82700 G-O-N Downspout Nozzle package includes the following:
- G-O-N Glue-On Nozzle
- Escut
Configuració i instal·lació
Follow these steps for proper installation of the G-O-N Downspout Nozzle:
- Prepare the PVC Pipe: Ensure the PVC drain pipe is clean, dry, and cut to the appropriate length for the desired installation location.
- Apply PVC Cement: Apply a suitable PVC cement to the exterior of the PVC drain pipe and the interior of the nozzle's PVC insert. Follow the cement manufacturer's instructions for application and curing times.
- Col·loqueu el broquet: Firmly push the G-O-N nozzle onto the PVC drain pipe, twisting slightly to ensure even distribution of the cement and a secure bond. Hold in place for a few seconds as the cement sets.
- Position the Escutcheon: The escutcheon is designed to sit flush against the wall surface, providing a finished look and acting as an anti-theft measure. Secure it using appropriate fasteners (not included) through the pre-drilled holes, ensuring it is level and tight against the wall.
- Temps de curat: Allow adequate curing time for the PVC cement before water is introduced into the system, as recommended by the cement manufacturer.
Video: An official product video demonstrating the RectorSeal 82700 Glue-On Nozzle. This video provides a visual guide to the product's features and potential installation context.
Funcionament
The Rectorseal G-O-N Downspout Nozzle operates passively by directing water flow away from the building's foundation. Once installed, it requires no active user intervention. Its design ensures efficient water discharge, minimizing pooling and protecting the structural integrity of the building.
Manteniment
To ensure optimal performance and longevity of your G-O-N Downspout Nozzle, consider the following maintenance tips:
- Inspecció periòdica: Periodically inspect the nozzle and the surrounding area for any debris, leaves, or other obstructions that might impede water flow.
- Neteja: If clogs are observed, carefully remove any accumulated debris. A gentle flush with water can help clear minor blockages. Avoid using harsh chemicals or abrasive tools that could damage the finish or material.
- Comproveu si hi ha danys: Inspect the nozzle and escutcheon for any signs of physical damage or loosening. Address any issues promptly to maintain functionality and appearance.
Resolució de problemes
If you encounter issues with your G-O-N Downspout Nozzle, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Water pooling near foundation | Nozzle is clogged with debris. | Inspect the nozzle opening and clear any obstructions. Ensure the downspout itself is also clear. |
| Nozzle appears loose or detached | Improper initial bonding or damage to the PVC connection. | Re-secure the nozzle to the PVC pipe using appropriate PVC cement. If the pipe or nozzle is damaged, replacement may be necessary. |
| Water leakage at connection point | Inadequate PVC cement application or improper curing. | Ensure the connection is clean and dry, then reapply PVC cement according to manufacturer instructions. Allow sufficient curing time. |
Especificacions
| Atribut | Detall |
|---|---|
| Número de model | 82700 |
| Marca | Rectorsegell |
| Material | Cast Nickel Brass |
| Mida | 2 polzades |
| Color | Bronze |
| Acabat exterior | Brass, Bronze, Nickel (Product is Bronze) |
| Tipus de connexió d'entrada | Threaded (for PVC insert, glues onto PVC pipe) |
| Tipus de connexió de presa | G Connector |
| Pes de l'article | 3 lliures |
| Ús | Només per a ús exterior |
| GTIN / UPC | 021449827003 |
Garantia i Suport
For specific warranty information or technical support regarding the Rectorseal 82700 G-O-N Glue-On Downspout Nozzle, please contact Rectorseal directly through their official website or customer service channels. Keep your purchase receipt for any warranty claims.
Rectorseal Contact Information:
- Weblloc: www.rectorseal.com
- Atenció al client: Consulteu el website for contact numbers or support forms.
