Hager EK570 Battery-Powered Thermostat User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Hager EK570 battery-powered weekly thermostat. Please read this guide thoroughly before use to ensure proper function, safety, and to maximize the benefits of its programmable features. Keep this manual for future reference.

2. Informació de seguretat

• Always disconnect power to the heating system before attempting any installation or maintenance.
• Installation should only be performed by a qualified electrician or competent person.
• Do not expose the thermostat to extreme temperatures, direct sunlight, high humidity, or water.
• Use only LR6 (AA) batteries as specified. Do not mix old and new batteries or different types of batteries.
• Mantingueu el dispositiu lluny dels nens.
• Do not attempt to open or repair the thermostat yourself. Refer to qualified service personnel.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• Hager EK570 Thermostat Unit
• 2 x LR6 (AA) Batteries
• Cargols de muntatge i tacs de paret (si escau)
• Aquest manual d'usuari

4. Producte acabatview

Familiarize yourself with the components of your Hager EK570 thermostat:

Figura 1: Frontal view of the Hager EK570 thermostat. The device features a clear LCD display at the top, two square buttons below the display, and a central control cluster at the bottom with '-', 'OK', and '+' buttons.

• Pantalla LCD: Shows current temperature, time, day, operating mode, and program status.
• Botons de control: Used for navigating menus, adjusting settings, and selecting modes. Typically includes 'Mode', 'Set', 'Up', 'Down', and 'OK' buttons.
• Compartiment de la bateria: Situat a la part posterior de la unitat.

5. Configuració

5.1. Instal·lació de la bateria

1. Remove the back cover of the thermostat.
2. Insert the 2 x LR6 (AA) batteries, ensuring correct polarity (+/-).
3. Replace the back cover. The display should now activate.

5.2. Muntatge del termòstat

The Hager EK570 is designed for surface mounting.

1. Trieu una ubicació adequada en una paret interior, allunyada de la llum solar directa, corrents d'aire i fonts de calor (per exemple, radiadors, lluminàries).amps). The recommended height is approximately 1.5 meters from the floor.
2. Carefully detach the front part of the thermostat from its base plate.
3. Mark the drilling points on the wall using the base plate as a template.
4. Perforar forats i inserir taps de paret.
5. Fixeu la placa base a la paret amb els cargols proporcionats.
6. Connect the heating system wires to the terminals on the base plate according to the wiring diagram provided with your heating system. Ensure all connections are secure and correct.
7. Reattach the front part of the thermostat to the base plate, ensuring it clicks securely into place.

5.3. Initial Settings (Time and Date)

Upon first power-up or after battery replacement, you may need to set the current time and day.

1. Press the 'SET' or 'MODE' button to enter the settings menu.
2. Use the '+' or '-' buttons to navigate to 'Time' or 'Date' settings.
3. Press 'OK' to confirm and then use '+' or '-' to adjust the values (hour, minute, day, month, year).
4. Press 'OK' to save each setting and exit the menu.

6. Instruccions de funcionament

The Hager EK570 offers various operating modes and programming options to optimize your heating.

6.1. Selecció dels modes de funcionament

The thermostat supports the following modes:

• Mode de confort: Maintains a comfortable temperature (e.g., 21°C) during occupied periods.
• Mode reduït: Maintains a lower, energy-saving temperature (e.g., 18°C) during unoccupied periods or at night.
• Mode de protecció contra gelades: Maintains a minimum temperature (e.g., 5°C) to prevent pipes from freezing.
• Mode manual: Allows you to set a constant temperature that overrides any programmed schedule.
• Mode de vacances: Maintains a specific temperature for an extended period (e.g., during vacation).

To switch between modes, press the 'MODE' button repeatedly until the desired mode is displayed.

6.2. Adjusting Temperature Setpoint

In any operating mode (except Frost Protection), you can temporarily adjust the temperature setpoint:

1. Use the '+' or '-' buttons to increase or decrease the desired temperature.
2. The new setpoint will be active until the next programmed event or until you manually change it again. This is known as a temporary override.

6.3. Programació setmanal

The EK570 is a weekly programmable thermostat, allowing you to set up to 48 program steps per day across 4 setpoints (Comfort, Reduced, etc.). It comes with 3 pre-recorded programs and 1 free program for customization.

1. Press the 'PROG' or 'SET' button to enter programming mode.
2. Use '+' or '-' to select the day of the week you wish to program (e.g., Monday, Tuesday, etc.).
3. Press 'OK' to confirm the day.
4. The display will show the first program period. Use '+' or '-' to set the start time and then 'OK'.
5. Next, select the desired operating mode (Comfort, Reduced, etc.) for this period using '+' or '-' and confirm with 'OK'.
6. Repeat steps 4 and 5 for all desired program periods for that day.
7. You can copy programs from one day to another if needed (refer to specific instructions in the full manual for this feature).
8. Exit programming mode by pressing 'PROG' or 'MODE' button.

7. Manteniment

7.1. Neteja

Netegeu el termostat casing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the plastic and electronic components.

7.2. Substitució de la bateria

The thermostat is powered by 2 x LR6 (AA) batteries. When the battery symbol appears on the display, or if the display becomes dim, it is time to replace the batteries.

1. Remove the back cover of the thermostat.
2. Traieu les piles velles.
3. Insert new 2 x LR6 (AA) batteries, observing correct polarity.
4. Torneu a col·locar la tapa posterior.

The thermostat has a power reserve of approximately 10 minutes, allowing for battery replacement without losing programmed settings, provided the replacement is done promptly.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

For detailed warranty information, technical support, or service inquiries, please refer to the official Hager weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el rebut de compra com a comprovant de compra.