Nitecore Digicharger D2 Universal Dual-Slot Battery Charger

1. Producte acabatview

The Nitecore Digicharger D2 is an intelligent, universal charger compatible with almost all cylindrical rechargeable batteries. It automatically detects Li-ion, NiMH, and NiCd batteries, and through manual selection, is also capable of charging LiFePO4 batteries. Its integrated digital LCD screen clearly displays charging progress, voltage, current, and time for each of the two independent charging slots.

Imatge 1.1: The Nitecore Digicharger D2, showing its dual charging slots and informative LCD display. This image illustrates the charger in operation with two batteries.

Característiques principals:

• Capaç de carregar 2 bateries simultàniament.
• Each of the two battery slots monitors and charges independently.
• Automatically identifies Li-ion, NiMH, and NiCd rechargeable batteries.
• Features three charging modes (CC, CV, and Trickle Charge).
• Detecta automàticament l'estat de la bateria i selecciona el volum adequattage i mode de càrrega.
• Integrated LCD panel displays charging parameters and progress.
• Atura automàticament la càrrega quan s'ha completat.
• Features over-charge prevention to protect batteries.
• Monitors temperature to prevent overheating.
• Made from durable ABS (fire retardant/flame resistant) material.
• Disposa de protecció de polaritat inversa.
• Designed for optimal heat dissipation.
• Certified by RoHS, CE, FCC, and CEC.

2. Instruccions de seguretat importants

Please read all instructions and warnings carefully before using this product. Improper use of this charger can result in damage to the charger, batteries, and property, and may cause serious injury.

• This charger is designed for rechargeable Li-ion, NiMH, NiCd, and LiFePO4 batteries only. Do not use with other battery types.
• No intenteu carregar bateries no recarregables.
• Keep the charger away from water, high humidity, and extreme temperatures.
• Do not disassemble, modify, or short-circuit the charger.
• Always unplug the charger from the power outlet when not in use or before cleaning.
• Assegureu-vos de la polaritat correcta de les piles en inserir-les.
• Do not leave charging batteries unattended for extended periods.
• Mantenir fora de l'abast dels nens.
• If the charger shows any signs of damage or malfunction, discontinue use immediately.

3. Configuració i funcionament

3.1. Configuració inicial

1. Desembalar: Carefully remove the Nitecore Digicharger D2 and its accessories from the packaging.
2. Connectar l'alimentació: Connect the power cord to the charger and then plug it into a standard AC power outlet (100-240V). The LCD screen will illuminate, indicating the charger is ready.
3. Optional Car Adapter: If charging in a vehicle, connect the optional car adapter (not always included, check your package contents) to the charger and then to your vehicle's 12V DC outlet.

3.2. Introducció de piles

The D2 features two independent charging slots. Each slot can accommodate one battery.

1. Identify Polarity: Observe the positive (+) and negative (-) markings on the charger and the battery.
2. Insereix la bateria: Gently slide the battery into the charging slot, ensuring the correct polarity. The spring-loaded mechanism will secure the battery in place.
3. Detecció automàtica: Upon insertion, the D2 will automatically detect the battery type (Li-ion, NiMH, or NiCd) and begin the charging process. For LiFePO4 batteries, manual selection is required (see section 3.3).

3.3. Charging Process and Display

Once a battery is inserted, the LCD screen will display real-time charging information:

• Tipus de bateria: Automatically detected (e.g., Li-ion, NiMH).
• Voltage: Vol actualtage de la bateria.
• Corrent de càrrega: The rate at which the battery is being charged (e.g., 0.5A).
• Progrés de càrrega: Indicated by a battery icon with increasing bars.
• Temps de càrrega: Elapsed time since charging began.

Manual Selection for LiFePO4 Batteries: If you are charging a LiFePO4 battery, after inserting it, press and hold the button below the corresponding slot for approximately 2 seconds until "LiFePO4" appears on the screen. The charger will then begin charging in the appropriate mode.

Mode de càrrega de baix corrent: For smaller capacity batteries (e.g., below 750mAh), the D2 can be set to a low current charging mode. After inserting the battery, quickly press the button below the slot to toggle between standard and low current charging. This helps prevent overstressing smaller batteries.

Botó de visualització: A dedicated button allows you to cycle through the display information for each slot or turn off the LCD backlight for undisturbed sleep.

Finalització de la càrrega: The charger will automatically stop charging when the battery is full. The display will show "FULL" or a similar indication.

4. Manteniment i cura

• Neteja: Desconnecteu el carregador de l'alimentació abans de netejar-lo. Feu servir un drap suau i sec per netejar la superfície. No utilitzeu productes de neteja abrasius ni dissolvents.
• Emmagatzematge: Guardeu el carregador en un lloc fresc i sec, allunyat de la llum solar directa i de la humitat quan no l'utilitzeu.
• Evita danys: Do not drop the charger or expose it to strong impacts. Avoid placing heavy objects on it.
• Ventilació: Ensure the charger has adequate ventilation during operation. Do not cover it.

5. Solució De Problemes

• El carregador no s'encén:
  • Ensure the power cord is securely connected to both the charger and the power outlet.
  • Comproveu si la presa de corrent funciona.
• Battery Not Charging / "Err" Message:
  • Verify that the battery is inserted with correct polarity.
  • Ensure the battery is a supported rechargeable type.
  • The battery might be severely over-discharged. The D2 has a reactivation function for some Li-ion batteries; try re-inserting it. If it still doesn't charge, the battery might be damaged.
  • Clean the battery contacts and charger contacts.
• Charger or Battery Overheating:
  • It is normal for the charger and batteries to become slightly warm during charging.
  • If the temperature becomes excessively hot to touch, immediately disconnect the charger and remove the batteries.
  • Assegureu-vos una ventilació adequada al voltant del carregador.
  • Do not charge damaged or faulty batteries.
• Lectures de visualització inexactes:
  • This is rare. Try unplugging the charger and plugging it back in.
  • Ensure the battery is fully seated in the slot.

6. Especificacions tècniques

7. Garantia i Suport

For detailed warranty information, terms, and conditions, please refer to the official Nitecore website or contact your local Nitecore distributor. Keep your purchase receipt as proof of purchase for warranty claims.

For technical support or inquiries, please visit the Nitecore official webla secció d'assistència del lloc web o contacteu directament amb el servei d'atenció al client.

Nitecore oficial Weblloc: www.nitecore.com