EBERTH GW2-ERWP10 2 HP 1-inch Gasoline Water Pump

1. Introducció

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your EBERTH GW2-ERWP10 2 HP 1-inch Gasoline Water Pump. This portable, gas-powered pump is designed for various water transfer tasks, offering independence from electrical power sources.

The pump is suitable for irrigating green spaces, fields, and gardens, as well as for draining swimming pools, basements, boats, or other areas affected by heavy rain or flooding. Its robust design and carry handle ensure easy transport and storage.

2. Instruccions de seguretat

Always adhere to the following safety guidelines to prevent injury or damage to the equipment.

• Llegeix el manual: Before operation, thoroughly read and understand all instructions in this manual.
• Ventilació: Operate the pump only in well-ventilated areas. Exhaust fumes contain carbon monoxide, which is a colorless, odorless, and deadly gas.
• Manipulació de combustible: Gasoline is highly flammable. Refuel in a well-ventilated area with the engine off and cool. Avoid spilling fuel. Do not smoke or use open flames near the pump or fuel.
• Superfícies calentes: The engine and exhaust system become very hot during operation and remain hot for some time after shutdown. Avoid contact to prevent burns.
• Superfície estable: Always place the pump on a firm, level surface to prevent tipping during operation.
• Només aigua: This pump is designed for water transfer. Do not pump flammable liquids, corrosive chemicals, or other hazardous materials.
• Nens i animals de companyia: Mantingueu els nens i les mascotes allunyats de la bomba en funcionament.
• Equips de protecció individual: Wear appropriate safety gear, such as gloves and eye protection, when handling fuel or operating the pump.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• EBERTH GW2-ERWP10 Gasoline Water Pump
• Filtre d'aspiració
• Hose connectors (1-inch)
• Mànega clamps
• Clau de bugia
• Ampolla de mescla de combustible
• Kit d'eines bàsiques
• Manual d'instruccions

4. Producte acabatview

Familiarize yourself with the main components of the water pump:

• Motor: 2 HP, 2-stroke gasoline engine.
• Dipòsit de combustible: Located on top of the engine, capacity 0.7 liters.
• Arrancador de tirada: For manual engine ignition.
• Palanca de l'accelerador: To adjust engine speed and water flow.
• Palanca d'asfixia: Used for cold starts.
• Suction Port: 1-inch threaded connection for the inlet hose.
• Port de descàrrega: 1-inch threaded connection for the outlet hose.
• Priming Port: Cap for filling the pump housing with water before starting.
• Tap de drenatge: For draining water from the pump housing.
• Metal Frame & Carry Handle: Provides stability and portability.

5. Configuració

5.1. Desembalatge i col·locació

1. Traieu amb cura la bomba i tots els accessoris de l'embalatge.
2. Place the pump on a stable, level, and well-ventilated surface, away from flammable materials.

5.2. Connexió de mànegues

1. Attach the suction filter to the end of the suction hose. Ensure the filter is fully submerged in the water source during operation.
2. Connect the suction hose to the pump's 1-inch suction port. Secure it tightly with a hose clamp to prevent air leaks. Air leaks in the suction line will prevent the pump from priming.
3. Connect the discharge hose to the pump's 1-inch discharge port. Secure it with a hose clamp.

5.3. Fueling the Engine

The EBERTH GW2-ERWP10 uses a 2-stroke engine, requiring a specific gasoline-oil mixture.

1. Prepare a fuel mixture of unleaded gasoline and 2-stroke engine oil at a ratio specified by the engine oil manufacturer (typically 25:1 or 50:1). Use the provided mixing bottle for accuracy.
2. Assegureu-vos que el motor estigui apagat i fred.
3. Desenrosqueu la tapa del dipòsit de combustible.
4. Carefully pour the mixed fuel into the fuel tank (0.7-liter capacity), avoiding overfilling.
5. Torneu a col·locar el tap del dipòsit de combustible de manera segura.

5.4. Aclarint la bomba

The pump must be primed with water before starting the engine to ensure proper operation and prevent damage.

1. Locate the priming port cap on top of the pump housing.
2. Unscrew the priming port cap.
3. Slowly fill the pump housing with clean water until it overflows.
4. Securely replace the priming port cap.

6. Instruccions de funcionament

6.1. Arrencada del motor

1. Ensure the pump is primed and all hose connections are secure.
2. Move the choke lever to the "CLOSED" or "START" position (for cold starts). For a warm engine, the choke may not be necessary.
3. Set the throttle lever to a mid-range position.
4. Grasp the pull starter handle firmly and pull it slowly until resistance is felt, then pull quickly and smoothly. Repeat until the engine starts.
5. Once the engine starts, gradually move the choke lever to the "OPEN" or "RUN" position as the engine warms up.

6.2. Ajust del cabal

The water flow rate can be continuously adjusted using the throttle lever.

1. Move the throttle lever towards "FAST" for higher engine RPM and maximum flow.
2. Move the throttle lever towards "SLOW" for lower engine RPM and reduced flow.

6.3. Aturar el motor

1. Moveu la palanca de l'accelerador a la posició "SLOW" o "IDLE".
2. Gireu l'interruptor del motor a la posició "OFF".

7. Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la bomba.

• Després de cada ús:
• Drain all water from the pump housing by removing the drain plug.
• Clean the suction filter to remove any debris.
• Wipe down the exterior of the pump.
• Emmagatzematge de combustible: If storing the pump for an extended period (more than 30 days), drain the fuel tank and carburetor to prevent fuel degradation and starting issues.
• Bujía: Inspect and clean the spark plug periodically. Replace if worn or fouled. Use the provided spark plug wrench.
• Filtre d'aire: Clean the air filter regularly, especially in dusty conditions. A dirty air filter can reduce engine performance and increase fuel consumption.

8. Solució De Problemes

Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions.

9. Especificacions

10. Garantia i Suport

For warranty information, technical support, or spare parts, please contact your retailer or the EBERTH customer service department. Keep your purchase receipt as proof of purchase.