TCM Tchibo Digital Radio Clock with Motion Sensor, LCD, and Crescendo Alarm

Introducció

Thank you for choosing the Tchibo Digital Radio Clock. This device combines a precise digital clock with a radio function and a convenient motion sensor for display illumination. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your product.

Instruccions de seguretat

• Llegiu atentament totes les instruccions abans d'utilitzar-les i conserveu-les per a futures consultes.
• No exposeu el dispositiu a l'aigua, a una humitat elevada o a temperatures extremes.
• Feu servir només el tipus de pila especificat. Assegureu-vos de la polaritat correcta en inserir les piles.
• No intenteu desmuntar ni reparar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb personal de servei qualificat.
• Mantenir fora de l'abast dels nens.
• Desfeu-vos de les piles de manera responsable d'acord amb la normativa local.

Contingut del paquet

Si us plau, comproveu que tots els articles estiguin presents al vostre paquet:

• Tchibo Digital Radio Clock (1 unit)
• Manual d'instruccions (aquest document)
• Nota: Les piles no estan incloses i s'han de comprar per separat.

Producte acabatview

Familiarize yourself with the main components of your radio clock:

Imatge 1: Davant view of the Tchibo Digital Radio Clock. The image displays the rectangular anthracite-colored clock with a clear LCD screen in the center. Below the screen, several control buttons are visible, likely for setting time, alarm, and radio functions. The overall design is modern and compact, suitable for a bedside table.

• Pantalla LCD: Mostra l'hora, l'estat de l'alarma i la freqüència de ràdio.
• Sensor de moviment: Activates display backlight when motion is detected nearby.
• Botons de control: (e.g., SET, ALARM, MODE, TUNING, SNOOZE) - Specific button functions will be detailed in the "Operating" section.
• Compartiment de la bateria: Located on the back or bottom of the unit.

Configuració

1. Powering On (Battery Installation)

1. Locate the battery compartment cover on the back or bottom of the clock.
2. Obriu la tapa.
3. Insert the required batteries (e.g., 2x AA or AAA, refer to the compartment label) ensuring correct polarity (+/-).
4. Tanqueu bé la tapa del compartiment de la bateria.
5. The display should now light up, and the clock will attempt to synchronize the time automatically.

2. Initial Time Synchronization

Your radio clock is designed to automatically synchronize with a radio time signal. This process may take a few minutes, especially during the first setup or after battery replacement. Ensure the clock is placed near a window or in an area with good reception.

• During synchronization, an icon (e.g., an antenna symbol) may flash on the display.
• Once synchronized, the icon will become solid, and the correct time will be displayed.

3. Manual Time Setting (If Automatic Fails)

If the clock fails to synchronize automatically or if you wish to set the time manually:

1. Manteniu premut el botó SET button for approximately 3 seconds until the hour digits start flashing.
2. Utilitza el UP or ABAIX buttons (or similar, depending on model) to adjust the hour.
3. Premeu SET de nou per confirmar l'hora i passar a la configuració dels minuts.
4. Ajusteu els minuts amb la tecla UP or ABAIX botons.
5. Premeu SET per confirmar i sortir del mode de configuració de l'hora.

4. Configuració de l'alarma

Your clock features a Crescendo alarm, which gradually increases in volume.

1. Manteniu premut el botó ALARMA button for approximately 3 seconds until the alarm hour digits flash.
2. Utilitza el UP or ABAIX botons per configurar l'hora d'alarma desitjada.
3. Premeu ALARMA de nou per confirmar l'hora i passar a la configuració dels minuts.
4. Ajusteu els minuts de l'alarma amb el botó UP or ABAIX botons.
5. Premeu ALARMA per confirmar i sortir del mode de configuració de l'alarma.
6. Per activar/desactivar l'alarma, premeu breument el botó ALARMA botó. Apareixerà/desapareixerà una icona d'alarma a la pantalla.

5. Radio Tuning

(Note: While the product is a "radio clock", specific radio tuning details are not provided. This section assumes basic functionality.)

1. Premeu el botó RÀDIO or MODE button to switch to radio mode.
2. Utilitza el TUNING or Amunt/Avall buttons to manually tune to your desired station.
3. Some models may have an auto-scan function; press and hold the TUNING botó per activar-lo.

En funcionament

1. Característiques de la pantalla

• Pantalla LCD: The main display shows the current time, and when active, the alarm time or radio frequency.
• Motion Sensor Backlight: The display is designed to be dim in normal conditions to avoid disturbing sleep. To illuminate the display, wave your hand over the top of the clock or activate the motion sensor area. The backlight will activate for a few seconds.

2. Funcions d'alarma

• Alarma crescendo: When the alarm sounds, its volume will gradually increase over a short period to gently wake you up.
• Funció de posposar: Quan soni l'alarma, premeu el botó DORMITAR button (usually a large button on top). The alarm will pause for a set period (e.g., 5-10 minutes) and then sound again.
• Aturar l'alarma: To turn off the alarm for the day, press any other button (e.g., ALARMA, SET) while it is sounding. The alarm will reset for the next day if it is still activated.

3. Funcions de ràdio

• Switching to Radio: Premeu el botó RÀDIO or MODE botó per escoltar la ràdio.
• Control de volum: Utilitza dedicat VOLUM +/- botons o Amunt/Avall buttons in radio mode to adjust the sound level.
• Switching Off Radio: Premeu el botó OFF or MODE button again to return to clock display or turn off the radio.

Manteniment

1. Neteja

• Wipe the clock with a soft, dry, or slightly damp tela.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and electronic components.
• Ensure no liquid enters the device.

2. Substitució de la bateria

• When the display becomes dim or functions become erratic, it's time to replace the batteries.
• Follow the "Powering On (Battery Installation)" steps in the Setup section to replace old batteries with new ones.
• Eliminar les bateries usades d'acord amb les normatives ambientals locals.

Resolució de problemes

Especificacions

Garantia i Suport

This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or contact your retailer for specific warranty terms and conditions.

For technical support or service inquiries, please contact the retailer where you purchased the product or visit the official Tchibo weblloc web per a informació d'atenció al client.