Introducció
Gràcies per la compraasing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp està dissenyat per oferir ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
Informació de seguretat
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- Feu servir només bombetes del tipus i l'aigua especificats.tage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- Aquesta lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Assegureu-vos que lamp es col·loca sobre una superfície estable i anivellada per evitar que es bolqui.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
Contingut del paquet
Si us plau, comproveu que hi hagi tots els components abans de començar el muntatge:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp endolls)
- Hardware Pack (screws, washers, etc., if applicable)
- Cable d'alimentació
Muntatge i muntatge
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- Desempaquetar components: Traieu amb cura totes les peces de l'embalatge i col·loqueu-les sobre una superfície neta i suau per evitar ratllades.
- Muntar els pals: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- Adjuntar la base: Securely attach the assembled poles to the brushed steel lamp base.
- Instal·leu prestatgeries: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- Adjunta Lamp Endolls: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp endoll.
- Inseriu les bombetes: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp sockets. Do not overtighten.
- Posició Lamp: Col·loca la lamp in its desired location, ensuring the power cord is not pinched or obstructed.
Figura 2: Detall de la lamp's base and shades.
Instruccions de funcionament
- Connexió d'alimentació: Connecteu la lamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- Activació/desactivació: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
Manteniment
- Neteja: Per netejar la lamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- Substitució de bombetes: Desendolleu sempre la lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'encén. | 1. Lamp no endollat. 2. Bulb is loose or burnt out. 3. Power outlet is not functioning. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| La llum parpelleja. | 1. Bombeta solta. 2. Incorrect bulb type/wattage. 3. Bombeta defectuosa. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp és inestable. | 1. Not on a level surface. 2. Poles not fully tightened. | 1. Mou la lamp a una superfície plana i estable. 2. Re-tighten all pole connections. |
Especificacions
- Número de model: 4305-22
- Dimensions (P x A x A): 11.7 "P x 14" W x 68" H
- Pes de l'article: 15.2 lliures
- Tipus de material: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- Color de l'ombra: Blanc
- Nombre de fonts de llum: 3
- Base de la bombeta: E26 Mitjà
- Wattage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- Tipus d'interruptor: Pull Chain (3 individual switches)
- Font d'alimentació: Elèctric amb cable
- Longitud del cable: Aproximadament 5 peus (60 polzades)
- Tipus d'instal·lació: Autònom
- Ús interior/exterior: Només interior
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
Informació de la garantia
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
Atenció al client
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso weblloc de recursos de suport.
Adesso Oficial Weblloc: www.adessohome.com