Invicta Pro Diver Model 18024SYB Watch Instruction Manual

Introducció

This manual provides essential instructions for the proper setup, operation, maintenance, and troubleshooting of your Invicta Pro Diver Model 18024SYB watch. Please read this guide thoroughly to ensure optimal performance and longevity of your timepiece.

Configuració

Establiment de l'hora

1. Identify the Crown: The crown is the small knob located on the side of the watch case, typically at the 3 o'clock position.
2. Estireu la corona: Gently pull the crown outwards to position B. You may feel a slight click. This position allows for time adjustment.
3. Ajustar l'hora: Rotate the crown in either direction to move the hour and minute hands to the desired time.
4. Empenyeu la corona cap enrere: Once the time is set, push the crown firmly back into its original position (position A) against the watch case. This ensures the watch is sealed and prevents water ingress.

Image: Invicta Pro Diver Model 18024SYB watch. The crown, used for setting the time, is visible on the right side of the watch case.

Funcionament del rellotge

Time Reading

Your Invicta Pro Diver watch features an analog display with hour, minute, and second hands. The luminous markers and hands enhance readability in low-light conditions.

Bisell giratori unidireccional

The watch is equipped with a black ion-plated stainless steel unidirectional rotating bezel. This bezel is designed to rotate only counter-clockwise, preventing accidental increases in dive time. To use it:

1. Align the zero marker on the bezel with the minute hand at the start of an activity (e.g., a dive or timed event).
2. La maneta dels minuts indicarà el temps transcorregut contra l'escala del bisell.

Resistència a l'aigua

This watch is water resistant to 100 meters (330 feet). This rating makes it suitable for swimming, snorkeling, and recreational diving. No és adequat per a submarinisme ni esports aquàtics d'alt impacte. Always ensure the crown is fully pushed in and secured before any contact with water.

Imatge: Frontal view of the Invicta Pro Diver Model 18024SYB watch, highlighting the gold textured dial and black rotating bezel.

Manteniment

Neteja del rellotge

• Netegeu la caixa i el vidre del rellotge amb un drap suau i sec regularment per eliminar la pols i les empremtes dactilars.
• For the silicone strap, use a mild soap solution and a soft brush, then rinse thoroughly with fresh water and dry completely.
• Eviteu utilitzar productes químics agressius, dissolvents o netejadors abrasius, ja que poden danyar l'acabat o les juntes del rellotge.

Canvi de bateria

Your Invicta Pro Diver watch is powered by a Japanese Quartz movement, which requires a battery. When the watch stops running, it indicates the battery needs replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Cura de la resistència a l'aigua

• Always ensure the crown is fully pushed in before exposing the watch to water.
• Avoid operating the crown or pushers (if present) while the watch is wet or submerged.
• Extreme temperature changes (e.g., hot shower followed by cold water) can affect the watch's seals.
• It is advisable to have the water resistance seals checked periodically by a professional, especially if the watch is frequently exposed to water.

Resolució de problemes

Rellotge que no funciona

• Esgotament de la bateria: As a quartz watch, if the watch stops, the battery is likely depleted. Seek professional battery replacement.
• Posició de la corona: Ensure the crown is fully pushed in to position A. If it is pulled out, the watch will not operate.

Condensation Inside Crystal

If you notice condensation or moisture inside the watch crystal, it indicates that the water resistance seals may have been compromised. This requires immediate attention from a qualified watch technician to prevent further damage to the movement.

Especificacions

Garantia i Suport

For information regarding your watch's warranty coverage, please refer to the warranty card included with your purchase or visit the official Invicta website. For technical support, repairs, or service, please contact Invicta customer service or an authorized service center. Always ensure that any service is performed by authorized personnel to maintain the validity of your warranty and the integrity of your watch.