Peerless SP850-UNL

Manual d'usuari del suport de paret per a TV de moviment complet Peerless SP850-UNL

Model: SP850-UNL

Introducció

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Peerless SP850-UNL Full-Motion TV Wall Mount. This mount is designed to securely hold flat panel displays ranging from 32 to 80 inches, offering swivel and tilt capabilities for optimal viewing angles. Please read this manual thoroughly before beginning installation to ensure proper setup and to prevent damage or injury.

Peerless SP850-UNL Full-Motion TV Wall Mount

Figura 1: The Peerless SP850-UNL Full-Motion TV Wall Mount. This image displays the black metal mount with its articulating arms extended, showing the wall plate and the TV mounting plate with various holes for different VESA patterns. The design allows for extensive movement, including swivel and tilt, to achieve optimal viewangles d'ajust.

Informació de seguretat

Always follow these safety guidelines to prevent personal injury or property damage:

  • Ensure the mounting surface can support the combined weight of the mount and the display.
  • Use appropriate tools and follow all installation steps carefully.
  • No apretar massa els cargols.
  • Mantingueu els nens i les mascotes allunyats durant la instal·lació.
  • Si teniu dubtes sobre alguna part de la instal·lació, consulteu un professional qualificat.

Configuració i instal·lació

Before you begin, ensure you have all necessary tools and hardware. Refer to the included hardware kit for specific fasteners.

1. Desembalatge i comprovació de components

Carefully unpack all components and verify against the parts list provided in the packaging. Report any missing or damaged parts to Peerless customer support immediately.

2. Wall Plate Installation

  1. Locate the desired mounting position on the wall. Use a stud finder to identify wood studs or ensure you are mounting into concrete/brick with appropriate anchors.
  2. Hold the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal.
  3. Mark the drilling locations through the holes on the wall plate.
  4. Drill pilot holes according to the recommended drill bit size for your wall type (refer to hardware kit instructions).
  5. Secure the wall plate to the wall using the provided lag bolts and washers. Ensure it is firmly attached.

3. Attaching Brackets to Display

  1. Lay your TV face down on a soft, clean surface to prevent scratches.
  2. Identifiqueu els forats de muntatge VESA a la part posterior del vostre televisor.
  3. Seleccioneu els cargols, les volanderes i els separadors adequats del kit de maquinari que s'adaptin als forats de muntatge del televisor.
  4. Attach the vertical mounting brackets to the back of your TV, ensuring they are centered and securely fastened. Do not overtighten.

4. Mounting Display to Wall Plate

  1. Amb ajuda, aixequeu amb cura el televisor amb els suports adjunts.
  2. Hook the brackets onto the wall plate. Ensure the TV is securely seated on the wall plate.
  3. Engage any safety locking mechanisms (if applicable) to prevent accidental dislodgement.

Funcionament de la muntura

The SP850-UNL mount offers flexible positioning for your display.

Ajust del gir

Gently grasp the sides of your TV and pivot it left or right to achieve the desired viewing angle. The mount allows for a wide range of horizontal movement.

Ajust de la inclinació

To adjust the vertical tilt, carefully push the top or bottom of the TV forward or backward. Some models may have knobs or levers to loosen/tighten the tilt mechanism; adjust as needed and re-tighten to secure the angle.

Extending/Retracting

To extend or retract the TV from the wall, gently pull or push the display. The articulating arms will move smoothly. Ensure cables are not pinched during movement.

Manteniment

Regular maintenance ensures the longevity and safe operation of your Peerless TV mount.

  • Neteja: Netegeu el suport amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
  • Comprovacions periòdiques: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal, però no els apreteu massa.
  • Comprovació de moviment: Ensure the swivel and tilt mechanisms move smoothly. If any stiffness is noted, check for obstructions or consult support.

Resolució de problemes

ProblemaCausa possibleSolució
Mount feels loose on wallWall plate not securely fastened; incorrect anchors used.Re-check wall plate fasteners. Ensure mounting into studs or appropriate concrete/brick anchors. Consult a professional if unsure.
Televisor no anivellatWall plate installed unevenly; TV brackets not aligned.Adjust the wall plate if possible, or re-install ensuring it is level. Check TV bracket alignment.
Difficulty adjusting swivel/tiltMechanisms are too tight; obstruction.Check for any locking screws or knobs that need loosening. Ensure no cables are obstructing movement.

Especificacions

Número de modelSP850-UNL
MarcaSense igual
Tipus de muntatgeMuntatge de paret
Tipus de movimentGirar, inclinar
Maximum Compatible Display Size80 Inches (suitable for 32-80 inch displays)
Dimensions del producte33.1 x 11.12 x 4.1 polzades
Pes de l'article30.2 lliures
ColorNegre
UPC735029246398

Informació de la garantia

Peerless products are designed for durability and reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Peerless website. Typically, Peerless offers a limited warranty covering defects in materials and workmanship under normal use.

Atenció al client

If you encounter any issues or have questions regarding your Peerless SP850-UNL mount, please contact Peerless customer support:

  • Weblloc: Visit the official Peerless weblloc web per a preguntes freqüents, registre de productes i informació de contacte.
  • Telèfon: Refer to the product packaging or Peerless weblloc web per a números de telèfon d'atenció al client.
  • Correu electrònic: Contact support via email for non-urgent inquiries.

When contacting support, please have your model number (SP850-UNL) and UPC (735029246398) ready.