Napoleon F60

Napoleon F60 Fireplace Remote Control User Manual

Model: F60

1. Introducció

The Napoleon F60 Fireplace Remote Control provides convenient and effective control over your Napoleon heating appliance. This battery-operated, hand-held device features a clear digital screen for easy temperature monitoring and adjustment. It is designed to simplify the operation of your fireplace, allowing for precise temperature management and on/off control.

Les característiques clau inclouen:

  • Convenient on/off and thermostat control.
  • Battery-operated, hand-held design with an easy-to-read digital screen.
  • A 2-degree temperature swing to reduce short on/off cycling (e.g., if set to 70°F, the fireplace activates at 69°F and deactivates at 71°F).
  • Ability to monitor room temperature every 60 seconds and adjust accordingly.

2. Què hi ha a la caixa

Upon unpacking your Napoleon F60 Fireplace Remote Control, ensure all the following components are present:

  • Transmitter (Remote Control Unit)
  • Unitat receptora
  • Bressol de paret
  • Wall Faceplate
  • Fireplace Mounting Plate
  • Interruptor de diapositives
  • 2 AAA Batteries (for Transmitter)
  • 4 AA Batteries (for Receiver)
  • Manual d'usuari (aquest document)
Napoleon F60 Fireplace Remote Control and Receiver

Image: The Napoleon F60 Fireplace Remote Control (transmitter) and its associated receiver unit.

3. Configuració i instal·lació

This section guides you through the physical installation and initial setup of your Napoleon F60 remote control system. Please refer to your fireplace's manual for specific details regarding its millivolt valve connections.

3.1. Connecting the Receiver to the Fireplace

  1. Identify Fireplace Connections: Locate the existing wall switch wires connected to your fireplace's millivolt gas valve. These are typically labeled TH/TP terminals.
  2. Disconnect Wall Switch: Carefully unplug the wires from your existing wall switch.
  3. Connecteu els cables del receptor: Connect the two wires from the F60 receiver unit to the TH/TP terminals on your fireplace's millivolt gas valve. Ensure a secure connection. The F60 receiver effectively replaces your manual wall switch.
  4. Instal·leu les bateries: Insert the provided 4 AA batteries into the receiver unit and 2 AAA batteries into the transmitter (remote control).

3.2. Maridatge inicial

If your remote and receiver are not pre-paired, or if you need to re-pair them:

  1. Ensure the receiver unit is powered on.
  2. Locate the reset button on the receiver unit.
  3. Press and hold the reset button for approximately 5 seconds until an indicator light on the receiver begins to blink.
  4. Deixeu anar el botó.
  5. Within a few seconds, press a button on the remote control (transmitter). The indicator light on the receiver should stop blinking and remain solid, indicating successful pairing.

4. Instruccions de funcionament

The Napoleon F60 remote control offers simple and intuitive operation for your fireplace.

4.1. Control d'encesa/apagada

  • Premeu el botó Poder button (Power icon) once to turn the fireplace ON.
  • Premeu el botó Poder button again to turn the fireplace OFF.

4.2. Control del termòstat

The remote allows you to set a desired room temperature. The fireplace will automatically turn on or off to maintain this temperature.

  • Premeu el botó Temperatura button (Thermometer icon) to activate thermostat mode.
  • Utilitza el Up (Up arrow icon) and Avall (Down arrow icon) arrow buttons to adjust the desired temperature.
  • The digital screen will display the current room temperature and your set temperature.
  • The system is designed with a 2-degree temperature swing. For example, if the thermostat is set to 70°F, the fireplace will activate when the room temperature drops to 69°F and turn off when it reaches 71°F.

5. Manteniment

To ensure optimal performance and longevity of your Napoleon F60 Fireplace Remote Control:

  • Substitució de la bateria: Replace the batteries in both the transmitter (2 AAA) and receiver (4 AA) when the display becomes dim or the remote's response is sluggish. Always use fresh, high-quality batteries.
  • Neteja: Wipe the remote control and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
  • Col·locació: Ensure the receiver unit is placed in an area that allows for good signal reception and is not directly exposed to excessive heat or moisture. The metal enclosure of the receiver is designed to withstand heat, but extreme conditions should be avoided.
  • Antena: Ensure the external antenna on the receiver is positioned for optimal signal transmission, especially if the receiver is located within a metal fireplace enclosure.

6. Solució De Problemes

If you encounter issues with your Napoleon F60 remote control, try the following solutions:

  • El comandament a distància no respon:
    • Check and replace batteries in both the transmitter and receiver.
    • Ensure the remote and receiver are within operational range and there are no obstructions.
    • Re-pair the remote and receiver (refer to Section 3.2).
  • Fireplace Not Turning On/Off:
    • Verify that the fireplace's pilot light is lit.
    • Check the wiring connections between the receiver and the fireplace's millivolt valve.
    • Ensure the receiver is powered on and its indicator light is functioning correctly.
  • Lectures de temperatura incorrectes:
    • Ensure the remote control is not placed near a direct heat source or in direct sunlight, which can affect its internal thermometer.
    • Allow sufficient time for the remote to acclimate to the room temperature.
  • Senyal intermitent:
    • Adjust the position of the receiver's external antenna for better signal reception.
    • Ensure the receiver is not completely enclosed by metal, which can interfere with wireless signals.

Si els problemes persisteixen després d'intentar aquests passos, poseu-vos en contacte amb l'atenció al client.

7. Especificacions

CaracterísticaDetall
MarcaNapoleó
Nom del modelF60
Número de modelF60
Característica especialErgonomic, No Programming Required
ColorNegre
Dispositius compatiblesLlar de foc
Tecnologia de connectivitatinfrarojos
Quantitat de botons4
Tipus de controladorControl de botons
Tipus de bateria2 AAA batteries (Transmitter), 4 AA batteries (Receiver) - included
Pes de l'article16 unces
UPC767674914827

8. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the official Napoleon product weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.