Introducció
The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.
Producte acabatview
The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:
- Bot de decaïment: Controls the length of the reverb tail.
- Mando de TONE: Adjusts the brightness or darkness of the reverb.
- Botó MIX: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
- Reverb Type Selector: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
- Interruptor de peu: Activa o evita l'efecte.
- Preses d'entrada/sortida: For connecting your instrument and ampmés viu.
- Entrada d'alimentació: For connecting a 9V DC power supply.
Configuració
- Connexió d'alimentació: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
- Connexió de l'instrument: Connect your instrument (e.g., guitar) to the input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- AmpConnexió del lifier: Connecteu la presa de sortida del costat esquerre del pedal al vostre amplifier's input using a standard 1/4-inch instrument cable.
- Stereo Operation (Optional): For stereo output, connect the second output jack to a second ampamplificador o dispositiu d'entrada estèreo.
Assegureu-vos que totes les connexions estiguin segures abans d'encendre el vostre amplifier and pedal.
Instruccions de funcionament
Funcionament bàsic
- Encès: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
- Selecting Reverb Type: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
- Adjusting Reverb Parameters:
- Utilitza el DECADÈNCIA knob to control the duration of the reverb.
- Utilitza el TO knob to adjust the frequency content of the reverb, making it brighter or darker.
- Utilitza el BARCELONA knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.
TonePrint Feature
The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.
Manteniment
- Neteja: Feu servir un drap suau i sec per netejar l'exterior del pedal. Eviteu productes de neteja o dissolvents abrasius.
- Substitució de la bateria: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
- Emmagatzematge: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so ni senyal feble | Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp rebutjat. | Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately. |
| Soroll o brunzit no desitjats | Ground loop, faulty cables, interference from other electronics, improper power supply. | Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices. |
| Effect not engaging (LED off) | No power, faulty footswitch. | Verify power connection and battery status. If problem persists, contact support. |
| TonePrint not loading | Incorrect app usage, connection issues. | Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance. |
Especificacions
- Model: T2
- Pes de l'article: 1 pound (approximately 454 grams)
- Dimensions del producte: 4.61 x 2.48 x 2.91 polzades (11.7 x 6.3 x 7.4 cm)
- Font d'alimentació: 9V DC (center negative) power adapter or 9V battery
- Voltage: 9 Volts
- Format del senyal: Analògic
- Interfície de maquinari: HP-HSC
Garantia i Suport
TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
Oficial Weblloc: www.tcelectronic.com