InnoGear 3 CREE XM-L T6 LED Headlamp Manual d'instruccions

1. Introducció

Thank you for choosing the InnoGear 3 CREE XM-L T6 LED Headlamp. This manual provides essential information for the safe and efficient use of your headlampLlegiu-lo atentament abans de fer-lo funcionar i conserveu-lo per a futures consultes.

2. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• InnoGear 3 CREE XM-L T6 LED Headlamp
• 2 x bateries recarregables d'ions de liti
• Carregador de paret
• Cable de càrrega USB

Image: The InnoGear headlamp, two blue rechargeable batteries, a wall charger, and a USB charging cable are included in the package.

3. Producte acabatview

The InnoGear headlamp features three CREE XM-L T6 LED lights for powerful illumination. It is designed for comfort and versatility in various outdoor activities.

Components clau:

• Llums LED: Three high-power CREE XM-L T6 LEDs.
• Botó de canvi: Located on the top of the main light housing for power and mode selection.
• Diadema ajustable: Elastic and adjustable for a secure and comfortable fit.
• Compartiment de la bateria: Located at the rear, housing two rechargeable batteries.
• Llum de seguretat: A red LED on the battery compartment for rear visibility.
• Angle de feix ajustable: The light housing can pivot up to 90 degrees.

Imatge: Un primer pla view del capamp's side, highlighting the 'Switch Button' on top and indicating '90° Rotation' for the light housing.

Image: The rear of the headlamp, showing the battery compartment with two blue batteries inserted, a 'Safety light' indicator, and charging ports.

4. Configuració

4.1 Instal·lació de la bateria

1. Open the battery compartment cover located at the rear of the headlamp.
2. Insert the two rechargeable Lithium-Ion batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Tanqueu bé la tapa del compartiment de la bateria.

4.2 Càrrega de les bateries

Before first use, fully charge the batteries. The headlamp can be charged via the included wall charger or USB cable.

1. Connect the wall charger or USB cable to the charging port on the battery compartment.
2. Plug the wall charger into a power outlet or the USB cable into a compatible USB power source.
3. An indicator light on the charger or headlamp will show charging status (e.g., red for charging, green for fully charged).
4. Un cop estigui completament carregat, desconnecteu el carregador.

4.3 Ajust de la diadema

Col·loca el capçalamp on your head and adjust the elastic straps to achieve a snug yet comfortable fit. Ensure the light unit is centered on your forehead.

5. Instruccions de funcionament

5.1 Encès/Apagat

Press the switch button on top of the main light housing to turn the headlamp on. Press it again to cycle through modes and turn off.

5.2 Canvi dels modes de llum

Each press of the switch button cycles through the available light modes:

1. 1 LED Mode: Activates the center LED.
2. 2 LED Mode: Activates the two side LEDs.
3. 3 LED Mode: Activates all three LEDs for maximum brightness.
4. Mode estroboscòpic: All three LEDs flash rapidly.
5. Apagat: Gira el capamp apagat.

Image: A visual representation of the headlamp's light modes, including 1 LED, 2 LED, 3 LED, and Strobe, showing which lights are active in each mode.

Imatge: Una persona que porta el capamp in a dark indoor setting, illustrating the broad and powerful beam of light projected onto a wall.

5.3 Ajust de l'angle del feix

The light housing can be tilted up or down by up to 90 degrees to direct the beam precisely where needed. Gently pivot the light unit to adjust its angle.

5.4 Safety Light

The red LED on the rear battery compartment provides additional visibility from behind, enhancing safety during night activities.

6. Manteniment

6.1 Neteja

• Netegeu el capamp cos amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Netegeu la lent suaument amb un drap de microfibra per evitar ratllades.

6.2 Cura de la bateria

• Recharge batteries regularly, even if not frequently used, to maintain their lifespan.
• Si guardeu el capçalamp for an extended period, remove the batteries.
• Use only the specified type of rechargeable Lithium-Ion batteries.

6.3 Emmagatzematge

Guardeu el capamp en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.

7. Solució De Problemes

• Capamp no s'encén:
  • Assegureu-vos que les bateries estiguin instal·lades correctament amb la polaritat adequada.
  • Check if batteries are charged. Recharge if necessary.
  • Verifiqueu que la tapa del compartiment de la bateria estigui ben tancada.
• La sortida de llum és tènue:
  • Batteries may be low. Recharge them fully.
  • Assegureu-vos que la lent estigui neta i lliure d'obstruccions.
• Capamp no cobra:
  • Check if the charging cable and wall charger are properly connected.
  • Assegureu-vos que la presa de corrent funcioni.
  • Try a different USB power source or wall outlet.

8. Especificacions

9. Informació de la garantia

Specific warranty details are not provided in this document. For warranty claims or information, please refer to the product packaging or contact the manufacturer directly.

10. Suport

For technical assistance, troubleshooting beyond this manual, or general inquiries, please contact InnoGear customer support through their official weblloc web o el distribuïdor a qui es va comprar el producte.