NVX XTRI1 Remote Turn On Module/Trigger User Manual

1. Introducció

The NVX XTRI1 is a remote turn-on module designed to provide a delayed turn-on signal for car audio amplifiers and other accessories. It is activated by a low-level trigger lead and features a built-in delay to help prevent turn-on noise, commonly known as 'amp thump'. This module ensures a smooth power-up sequence for your audio system components.

2. Característiques del producte

• Remote Turn-On Module: Provides a reliable remote signal for connected devices.
• Activated By Low Level Trigger Lead: Responds to standard low-level trigger signals.
• 2 Second Delay: Incorporates a two-second delay to prevent turn-on noise and protect speakers.
• Supplies 2 Amps Of Current: Capable of powering multiple amplifiers or a power antenna.
• Can Drive Multiple Amps Or A Power Antenna: Versatile for various car audio setups.

3. Informació de seguretat

• Desconnecteu sempre el terminal negatiu de la bateria del vehicle abans de començar qualsevol instal·lació elèctrica.
• Assegureu-vos que totes les connexions del cablejat estiguin ben fixades i degudament aïllades per evitar curtcircuits.
• Consulteu un instal·lador professional d'àudio per a cotxes si no teniu cap dubte sobre alguna part del procés d'instal·lació.
• Do not expose the module to excessive moisture or extreme temperatures.
• This product is designed for 12V DC automotive electrical systems only.

4. Contingut del paquet

• 1x NVX XTRI1 Remote Turn On Module/Trigger

5. Configuració i instal·lació

The NVX XTRI1 module is designed for straightforward integration into your car audio system. Follow these steps for proper installation:

Esquema de cablejat

The XTRI1 typically features three wires for connection:

• Fil vermell: Connect to a constant 12V power source (e.g., directly to the battery or a fused 12V line).
• Fil negre: Connecteu-vos a un punt de terra fiable del xassís.
• Filferro blau: This is the output remote turn-on signal. Connect this wire to the remote input terminal of your amplifier(s) or other accessories requiring a turn-on signal.

The module receives its activation signal through the same 12V power input (Red wire) when the vehicle's ignition or head unit provides power. The XTRI1 then processes this signal and outputs a delayed 12V signal through the Blue wire.

An image of the NVX XTRI1 Remote Turn On Module/Trigger. It is a black rectangular module with the NVX logo and model XTRI1 printed on it, featuring a small green LED indicator and three colored wires (red, blue, black) extending from one side. This illustrates the compact design and wiring connections.

6. Instruccions de funcionament

Once properly installed, the NVX XTRI1 operates automatically. When your vehicle's ignition is turned on, or your head unit sends a 12V remote signal to the module's input, the XTRI1 will activate. After a brief 2-second delay, it will then send a 12V remote turn-on signal to your connected amplifiers or accessories. This delay ensures that your audio components power on after the initial electrical surge, minimizing any audible 'thump' or 'pop' sounds through your speakers.

7. Manteniment

The NVX XTRI1 is designed for maintenance-free operation. To ensure longevity and optimal performance:

• Inspeccioneu periòdicament totes les connexions del cablejat per assegurar-vos que estiguin ben fixades i sense corrosió.
• Keep the module free from dust and debris. A soft, dry cloth can be used for cleaning.
• Ensure the module is mounted in a location that is not exposed to direct sunlight, extreme heat, or moisture.

8. Solució De Problemes

If you encounter issues with your NVX XTRI1 module, refer to the following troubleshooting guide:

• No Turn-On Signal to Ampmés viu:
  • Check the 12V power connection (Red wire) to ensure it has constant power.
  • Verify the ground connection (Black wire) is secure and making good contact with the chassis.
  • Confirm that the head unit or ignition is providing a turn-on signal to the XTRI1's input.
  • Inspect the blue output wire for continuity and proper connection to the ampentrada remota del lificador.
• No Delay or Immediate Turn-On:
  • The XTRI1 is designed to provide a 2-second delay. If the delay is not observed, ensure the module is receiving a stable 12V input. Some users have reported that the delay function may be sensitive to specific voltage characteristics, and in some 12V car environments, the delay might not be as pronounced as expected.
  • Verify the module is correctly wired and not bypassed.
• Amplifier Still Produces 'Pop' Sound:
  • While the XTRI1 is designed to reduce turn-on noise, some systems may still exhibit a slight pop. Ensure all audio components (head unit, line output converters, amplifiers) are properly grounded.
  • Check for ground loops in the audio system.
  • Assegureu-vos el amplifier's gain settings are not excessively high.
• Module Not Functioning:
  • Check for any visible damage to the module or its wiring.
  • Test the input and output voltages with a multimeter to confirm power delivery and signal output.

9. Especificacions

10. Garantia i Suport

For warranty information or technical support regarding your NVX XTRI1 module, please refer to the documentation provided at the time of purchase or contact NVX customer service directly. You may also visit the official NVX weblloc web per obtenir recursos addicionals i dades de contacte.

Per obtenir més ajuda, visiteu el Botiga NVX a Amazon.