TROTEC BA16 Flexible Vane Anemometer User Manual

1. Introducció

The TROTEC BA16 is a flexible vane anemometer designed for quick and easy measurement of air velocity, air temperature, and air flow (CMM). Its semi-flexible gooseneck probe allows for measurements in hard-to-reach areas, making it suitable for various applications in HVAC, environmental monitoring, and industrial settings.

Característiques principals:

• Rapid and straightforward measurement of air velocity, air temperature, and air flow (m³/min => CMM).
• Backlit display for clear readability in various lighting conditions.
• Minimum, Maximum, and HOLD functions for data analysis.
• Funció d'apagada automàtica per estalviar bateria.
• 40 cm semi-flexible gooseneck probe for versatile positioning.

2. Informació de seguretat

Please read this manual carefully before operating the device. Keep these instructions for future reference. Failure to follow safety guidelines may result in injury or damage to the device.

• No exposeu el dispositiu a temperatures extremes, humitat o llum solar directa.
• Eviteu impactes forts o que el dispositiu caigui.
• Do not attempt to open or modify the device. Repairs should only be performed by authorized personnel.
• Ensure correct battery polarity when installing. Remove batteries if the device will not be used for an extended period.
• Mantingueu el dispositiu fora de l'abast dels nens.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents i no estiguin danyats en desempaquetar-los:

• TROTEC BA16 Flexible Vane Anemometer
• Bateria de 9 V
• Manual d'usuari
• Protective Carrying Case (if included with your model)

4. Producte acabatview

Familiarize yourself with the components of your BA16 anemometer.

Figura 4.1: Davant view of the TROTEC BA16 Flexible Vane Anemometer, showing the main unit, flexible probe, and impeller.

Figura 4.2: Detallada view of the TROTEC BA16 Anemometer display and control buttons, highlighting Auto Power Off, Min/Max, Backlight, Soft-touch, Protective Cover, and 9V battery icons.

Components:

1. Impeller Vane: Rotates to measure air velocity.
2. Flexible Gooseneck Probe: Allows for adjustable positioning of the impeller.
3. Pantalla LCD: Mostra lectures de mesura, unitats i indicadors de funció.
4. Botó d'encesa: Encén i apaga el dispositiu.
5. Botó MÍN/MÀX: Toggles between minimum, maximum, and current readings.
6. Botó HOLD: Congela la lectura actual a la pantalla.
7. Botó UNITATS: Changes measurement units (e.g., m/s, km/h, ft/min, knots, mph for velocity; °C, °F for temperature; CMM for flow).
8. Botó de retroil·luminació: Activa o desactiva la retroiluminació de la pantalla.
9. Compartiment de la bateria: Located on the rear for 9V battery installation.

5. Configuració

5.1 Instal·lació de la bateria

1. Localitzeu la tapa del compartiment de la bateria a la part posterior del dispositiu.
2. Feu lliscar o desenganxeu la tapa per obrir-la.
3. Introduïu una pila de 9 V, assegurant-vos de la polaritat correcta (+/-).
4. Tanqueu bé la tapa del compartiment de la bateria.

Figura 5.1: posterior view of the TROTEC BA16 Anemometer, showing the battery compartment and an illustration for 9V battery installation.

6. Instruccions de funcionament

6.1 Encès/Apagat

• Premeu el botó Poder button once to turn the device on.
• Manteniu premut el botó Poder button for approximately 2 seconds to turn the device off.
• The device features an automatic power-off function to save battery. It will power off after a period of inactivity.

6.2 Prendre mesures

1. Enceneu el dispositiu.
2. Position the flexible gooseneck probe so that the impeller is directly in the airflow you wish to measure. Ensure the airflow passes through the impeller blades.
3. The display will show the current air velocity and air temperature.
4. To measure air flow (CMM), you may need to input the area of the duct or vent into the device (refer to specific CMM calculation instructions if available on the device or in advanced settings).

Figura 6.1: A hand holding the TROTEC BA16 Anemometer, demonstrating its ergonomic design and flexible probe in use.

Figura 6.2: The TROTEC BA16 Anemometer's flexible probe inserted into an air vent for measurement, showcasing its application.

6.3 Canvi d'unitats

• Premeu el botó UNITATS button to cycle through available measurement units for air velocity (e.g., m/s, km/h, ft/min, knots, mph) and temperature (°C, °F).

6.4 MIN/MAX/HOLD Functions

• Premeu el botó MIN / MAX button to display the minimum or maximum recorded values during a measurement session. Press again to cycle through MIN, MAX, and current readings.
• Premeu el botó MANTENIM button to freeze the current reading on the display. Press again to release the hold function and resume live measurements.

6.5 Funcionament de la llum de fons

• Premeu el botó Llum de fons button (often indicated by a light bulb icon) to turn the display backlight on or off.

7. Manteniment

7.1 Neteja

• Netegeu el dispositiu casing amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Ensure the impeller vane is free from dust and debris for accurate readings. Use a soft brush or compressed air if necessary, being careful not to damage the blades.

7.2 Substitució de la bateria

• Quan aparegui l'indicador de bateria baixa a la pantalla, substituïu la pila de 9 V tal com es descriu a la secció 5.1.
• Eliminar les bateries usades d'acord amb la normativa local.

7.3 Emmagatzematge

• Store the device in its protective case in a cool, dry place when not in use.
• Remove the battery if storing for extended periods to prevent leakage.

8. Solució De Problemes

9. Especificacions

10. Garantia

TROTEC products are manufactured to high-quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship for a period specified at the time of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.

11. Suport

For technical support, service, or further information regarding your TROTEC BA16 anemometer, please contact TROTEC customer service through their official weblloc web o les dades de contacte proporcionades amb la documentació de compra.

Weblloc: www.trotec.com

Please have your model number (BA16) and serial number (if applicable) ready when contacting support.