Tunze 6040.000

Tunze Turbelle Nanostream 6040 DC Controllable Pump

Manual d'instruccions

Brand: Tunze | Model: 6040.000

1. Introducció

Thank you for choosing the Tunze Turbelle Nanostream 6040 DC Controllable Pump. This compact and powerful pump is designed to create optimal water movement in aquariums up to 120 gallons, ensuring a healthy environment for your aquatic inhabitants. Its controllable DC motor and included controller allow for precise adjustment of flow patterns and intensity.

2. Instruccions de seguretat

  • Always disconnect the power supply before performing any maintenance or handling the pump.
  • Ensure your hands are dry before plugging in or unplugging the power supply.
  • La bomba està dissenyada només per a ús submergible. No la feu funcionar en sec.
  • Do not modify the pump or its components. Use only original Tunze parts.
  • Keep the power cord and controller away from water.
  • This product is intended for aquarium use only.

3. Contingut del paquet

Verifiqueu que tots els components següents estiguin inclosos al paquet:

  • Tunze Turbelle Nanostream 6040 DC Pump
  • Controlador 7090
  • Muntatge d'imants
  • Unitat d'alimentació

4. Configuració

Follow these steps to set up your Tunze Turbelle Nanostream 6040 pump:

  1. Muntatge de la bomba: Position the pump inside your aquarium at the desired location. Use the included magnet mount to secure the pump to the aquarium glass. Ensure the outer magnet is placed directly opposite the inner magnet on the exterior of the glass. The pump can be discreetly concealed behind rockwork.
  2. Connexió del controlador: Connect the pump's cable to the designated port on the Controller 7090.
  3. Connexió de la font d'alimentació: Plug the power supply unit into the controller, then plug the power supply into a suitable electrical outlet.
  4. Col·locació inicial: For optimal water flow, place the pump in an area that allows for maximum circulation without disturbing the substrate excessively.
Tunze Turbelle Nanostream 6040 DC Controllable Pump with Controller and Magnet Mount

Image: Tunze Turbelle Nanostream 6040 DC Controllable Pump, showing the pump unit, controller, and magnet mount. The controller features adjustment knobs for various settings.

5. Operating the Pump

The Controller 7090 provides versatile control over your Nanostream 6040 pump:

  • Ajust del flux: The controller features knobs to adjust the maximum speed, minimum speed, and the interval between these two settings. This allows for fine-tuning of water flow to suit your aquarium's needs.
  • Modes de funcionament: The controller supports various modes, including constant flow, pulse mode (simulating natural wave action), and other functions for creating specific water movement patterns. Refer to the controller's specific instructions for detailed mode selection and programming.
  • Mode d'alimentació: A dedicated feed timer button allows you to temporarily pause the pump for feeding, preventing food from being immediately drawn into filtration.

Experiment with the settings to find the ideal flow for your aquarium's inhabitants and aquascape.

6. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim de la bomba:

  • Neteja: Periodically remove the pump from the aquarium (after disconnecting power) and gently clean the impeller and pump housing. Use a soft brush to remove any algae, detritus, or calcium buildup. Do not use harsh chemicals.
  • Inspecció de l'impel·lent: Check the impeller for any signs of wear or damage. A worn impeller can lead to increased noise or reduced performance.
  • Inspecció del cable: Regularly inspect the power cable and connections for any signs of damage or fraying.
  • Muntatge de l'imant: Ensure the magnet mount is clean and free of debris to maintain a secure grip on the aquarium glass.

7. Solució De Problemes

ProblemaCausa possibleSolució
La bomba no funcionaNo power; disconnected cable; impeller jammed.Check power connection; ensure cables are securely plugged in; clean impeller.
Caudal reduïtImpeller clogged; pump needs cleaning; incorrect controller setting.Clean pump and impeller; adjust controller settings.
Soroll excessiuImpeller dirty or damaged; air trapped in pump; improper mounting.Clean or replace impeller; gently shake pump to release air; re-position pump securely.

If you continue to experience issues, please contact Tunze customer support.

8. Especificacions

CaracterísticaDetall
Número de model6040.000
Pes de l'article1.65 lliures (0.75 kg)
Dimensions del producte (LxWxH)2.5 x 2.5 x 3.7 polzades (6.35 x 6.35 x 9.4 cm)
MaterialPlàstic
ColorNegre
FabricantTunze USA LLC
Apte per a aquarisUp to 120-Gallon

9. Garantia i Suport

Tunze products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Tunze website. For technical support or assistance with your Tunze Turbelle Nanostream 6040, please contact Tunze customer service through their official channels.

Podeu trobar més informació i dades de contacte a Tunze Store on Amazon.

© 2025 Tunze. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.