1. Producte acabatview
The Permatex 81160 High-Temp Red RTV Silicone Gasket Maker is a specialized sealant designed for heavy-duty applications requiring resistance to extreme temperatures. This product forms reliable gaskets that can withstand intermittent temperatures ranging from -65 °F a 650 °F (-54 °C a 343 °C).
It is formulated to create durable, flexible, and waterproof seals for various automotive and industrial repair needs.
Image 1.1: Permatex 81160 High-Temp Red RTV Silicone Gasket tube. This image shows the product packaging, highlighting the brand, product name, and key features.
2. Informació de seguretat
Always read and understand all safety precautions before using this product. Use personal protective equipment as required.
2.1. Precautionary Statements - Prevention
- Contains: Calcium carbonate, Iron oxide.
- Obteniu instruccions especials abans d'utilitzar.
- No manipular-lo fins que no s'hagin llegit i entès totes les precaucions de seguretat.
- Utilitzeu equips de protecció individual segons sigui necessari.
2.2. Precautionary Statements - Response
- SI EN ELS ULLS: Esbandiu acuradament amb aigua durant diversos minuts. Traieu les lents de contacte, si en porteu i és fàcil fer-ho. Continueu esbandint. Si la irritació ocular persisteix, consulteu un metge.
- SI ÉS A LA PELL: Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention. Wash contaminated clothing before reuse.
2.3. Precautionary Statements - Storage
- Protegir de la llum solar.
- Emmagatzemar en un lloc ben ventilat.
- Botiga tancada.
- Mantenir fora de l'abast dels nens.
3. Configuració
3.1. Preparació de la superfície
For optimal results, ensure that all surfaces where the gasket maker will be applied are net i sec. Remove any old gasket material, grease, oil, or other contaminants that could interfere with adhesion.
4. Instruccions d'aplicació
- Prepare Nozzle: Talleu el broquet a la mida desitjada.
- Apply Gasket Maker: Apply a continuous bead of silicone, approximately 1/16" to 1/4" (2 to 6mm) thick, to one surface. Ensure the bead surrounds all bolt holes.
- Muntar peces: Immediately assemble the parts while the silicone is still wet.
- Ajust inicial: Finger tighten the assembly until the material begins to squeeze out around the flange.
Imatge 4.1: Ex.ample of Permatex 81160 High-Temp Red RTV Silicone Gasket application. This image illustrates the product being applied as a continuous bead on a surface.
5. Curing and Finishing
- Initial Dry Time: Allow the gasket maker to dry for una hora.
- Ajustament final: After the initial dry time, tighten the assembly to the manufacturer's specified torque.
- Temps de curació completa: Permetre 24 hores for the gasket maker to fully cure before filling with fluids or returning the component to service.
6. Manteniment
6.1. Emmagatzematge de productes
Després de cada ús, replace the cap securely to prevent the product from drying out. Store the tube in a cool, dry, well-ventilated area, away from direct sunlight and out of reach of children.
7. Troubleshooting and Limitations
Nota important: Aquest producte és NO recomanat for use on head gaskets or on parts that will come into direct contact with gasoline. Using the product in these applications may lead to product failure and potential damage.
8. Especificacions del producte
| Característica | Detall |
|---|---|
| Nom del producte | Permatex High-Temp Red RTV Silicone Gasket Maker |
| Número de model | 81160 |
| Marca | Permatex |
| Material | Silicona |
| Color | Vermell |
| Temperature Range (Intermittent) | -65 °F a 650 °F (-54 °C a 343 °C) |
| Temps de curació completa | 24 hores |
| Volum de l'article | 3 unces líquides |
| Nivell de resistència a l'aigua | Impermeable |
| UPC | 686226811608 |
9. Informació d'eliminació
Dispose of contents and container in accordance with local regulations and to an approved waste disposal plant. Do not dispose of in household waste.
10. Contacte i suport
For further assistance or inquiries, please contact Permatex:
- Fabricant: Permatex Chemicals, a division of ITW
- Adreça: Solon, OH 44139, USA
- Número gratuït: 866-732-9502
- Weblloc: www.permatex.com
Permatex and its design are trademarks of Illinois Tool Works Inc. The product is assembled in the U.S.A. with U.S. and global materials.
11. Informació de la garantia
Specific warranty details for Permatex products are typically available on the manufacturer's official website or by contacting their customer support directly. Please refer to www.permatex.com o truca 866-732-9502 for the most current warranty information.