THINKWARE Rear View Camera (TWA-X500F750R) Instruction Manual

Introducció

This manual provides instructions for the installation, operation, and maintenance of the THINKWARE Rear View Camera, model TWA-X500F750R. This camera is designed to be used as an accessory with compatible THINKWARE dash cam main units, specifically the X500, X550, and F770 models, to provide comprehensive surveillance of your vehicle's rear surroundings.

The TWA-X500F750R features a Full HD 1080p camera with a Sony Exmor CMOS Sensor and a 140-degree viewing angle, ensuring wide coverage and clear video capture. When connected to a hardwired main unit, it supports impact and motion detection during Parking Mode, offering dual-channel recording for both front and rear views.

Què hi ha a la caixa

Si us plau, comproveu el contingut del vostre paquet. Si falta algun article o hi ha algun malmès, poseu-vos en contacte amb el vostre distribuïdor.

posterior View Camera (TWA-X500F750R)
posterior View Camera Cable (21 feet / 6.4 meters)
Guia ràpida

THINKWARE Rear View Camera (TWA-X500F750R)

Image: The THINKWARE Rear View Unitat de càmera.

Configuració i instal·lació

Aquesta part posterior view camera is designed for use with compatible THINKWARE dash cam main units (X500, X550, F770). Ensure your main unit is properly installed and functioning before proceeding with the rear camera installation.

Passos d'instal·lació:

Seleccioneu la ubicació de muntatge: Choose a location on your vehicle's rear window that provides a clear, unobstructed view. Avoid areas that might interfere with defroster lines or wiper blades. The camera should be positioned centrally for optimal coverage.
Superfície neta: Thoroughly clean the chosen area on the rear window with an alcohol wipe and allow it to dry completely. This ensures proper adhesion.
Test Orientation: Before permanently attaching the camera, temporarily hold it in place and connect it to the main dash cam unit. Power on the main unit and check the live view (if available) or a recorded clip to confirm the camera's orientation is correct (not upside down or rotated). Adjust as necessary.
Connecta la càmera: Remove the protective film from the adhesive pad on the camera mount. Firmly press the camera onto the cleaned rear window surface for at least 30 seconds.
Cable de ruta: Carefully route the 21-foot connecting cable from the rear camera along the vehicle's headliner, down the side pillars, and to the main dash cam unit. Use cable clips (not included) to secure the cable and hide it for a neat installation. Ensure the cable does not interfere with airbags or other vehicle safety features.
Connectar a la unitat principal: Plug the rear camera cable into the designated rear camera port on your THINKWARE main dash cam unit.
Engegar i verificar: Power on your main dash cam unit. The rear camera should be automatically detected and begin recording. Verify its operation through the main unit's display or companion app.

THINKWARE Rear View Camera mounted on a car's rear window

Imatge: La part posterior view camera installed on a vehicle's rear window.

Instruccions de funcionament

The THINKWARE Rear View Camera operates in conjunction with your compatible THINKWARE main dash cam unit. It does not function as a standalone device.

Enregistrament automàtic: Once connected and the main dash cam unit is powered on, the rear camera will automatically begin recording simultaneously with the front camera.
Gravació de doble canal: Vídeo footage from both the front and rear cameras is recorded and stored on the main unit's memory card.
Mode d'aparcament: If your main dash cam unit is hardwired and configured for Parking Mode, the rear camera will also capture impact and motion events in the rear of the vehicle when the ignition is off. Refer to your main dash cam unit's manual for detailed Parking Mode settings and functionality.
Viewing Footage: A view footage from the rear camera, access the recorded files through your main dash cam unit's display, PC viewer software, or mobile application. Rear camera footage is typically paired with the corresponding front camera footage.

For detailed instructions on specific recording modes, settings, and file management, please refer to the instruction manual of your THINKWARE X500, X550, or F770 main dash cam unit.

Manteniment

Proper maintenance ensures the longevity and optimal performance of your rear view càmera.

Neteja de la lent: Gently wipe the camera lens with a soft, lint-free cloth. For stubborn smudges, use a small amount of lens cleaning solution applied to the cloth, not directly to the lens. Avoid abrasive materials or harsh chemicals.
Neteja del cos: Wipe the camera body with a dry or slightly damp drap suau.
Comprovació d'adhesiu: Periodically check the camera's adhesive mount to ensure it remains firmly attached to the window. If the adhesive weakens, consider replacing it with a new, strong automotive-grade adhesive pad.
Inspecció del cable: Inspect the connecting cable for any signs of wear, damage, or kinks. Ensure it remains securely routed and connected.
Temperatura: Avoid exposing the camera to extreme temperatures for extended periods, as this can affect its performance and lifespan.

Resolució de problemes

If you encounter issues with your THINKWARE Rear View Camera, refer to the following common problems and solutions.

Problema	Possible causa/solució
Rear camera not detected / No rear video.	Ensure the rear camera cable is securely connected to both the rear camera and the main dash cam unit. Check the main dash cam unit's settings to ensure the rear camera option is enabled. Restart the main dash cam unit. Inspect the cable for any damage. A damaged cable may need replacement.
Poor image quality from rear camera.	Netegeu la lent de la càmera amb un drap suau i sense pelusa. Ensure the rear window is clean and free from obstructions (e.g., dirt, condensation, tint bubbles). Verify the camera's mounting angle. It should have a clear view de la carretera. Low light conditions can naturally reduce image quality.
Càmera posterior footage is upside down or rotated.	This indicates incorrect physical orientation during installation. Carefully detach the camera (if adhesive allows without damage) and re-mount it with the correct orientation. Refer to the "Test Orientation" step in the Setup section. Some main dash cam units may have a software setting to rotate the rear camera image. Check your main unit's manual or settings.

If the problem persists after trying these solutions, please contact THINKWARE customer support or your authorized retailer.

Especificacions

Característica	Detall
Nom del model	TWA-X500F750R
Número de model de l'article	BCFH-150
Resolució de captura de vídeo	1080p Full HD
Sensor d'imatge	Sony Exmor CMOS Sensor
Camp de View	140 Degrees (Diagonal)
Característica especial	Gran angular View Lent
Tecnologia de connectivitat	USB
Longitud del cable de connexió	21 peus (6.4 metres)
Tipus de muntatge	Windshield Mount with Adhesive
Color	Negre
Dimensions del producte	2.24 x 0.94 x 1.06 polzades
Pes de l'article	0.96 unces
Compatible Main Units	THINKWARE X500, X550, F770 Dash Cams

Garantia i Suport

Garantia del fabricant:

This THINKWARE Rear View Camera (TWA-X500F750R) is covered by a One-Year Manufacturer's Warranty. This warranty applies only to units sold by authorized retailers. Please retain your proof of purchase for warranty claims.

The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, abuse, misuse, natural disaster, or unauthorized modification or repair.

Atenció al client:

For technical assistance, warranty claims, or further inquiries, please contact THINKWARE customer support. You may also reach out to the authorized retailer from whom you purchased the product.

Please visit the official THINKWARE website for the most up-to-date support information, FAQs, and contact details. Having your product model number (TWA-X500F750R) and proof of purchase ready will help expedite the support process.

THINKWARE TWA-X500F750R