1. Introducció
Thank you for choosing the Fluid Audio C5 2-Way 5 Inch Active Studio Monitor. This manual provides essential information for the proper setup, operation, and maintenance of your studio monitors. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
2. Instruccions de seguretat
- Font d'alimentació: Connect the unit only to a power supply of the type specified in this manual or on the unit. Ensure the voltagcoincideix amb la teva regió (110 V o 220 V).
- Ventilació: No bloquegeu cap obertura de ventilació. Instal·leu-ho d'acord amb les instruccions del fabricant.
- Aigua i humitat: No utilitzeu aquest aparell a prop de l'aigua ni l'exposeu a degoteigs o esquitxades.
- Calor: No instal·leu a prop de cap font de calor com ara radiadors, registres de calor, estufes o altres aparells (inclosos amplificadors) que produeixen calor.
- Neteja: Netegeu només amb un drap sec.
- Manteniment: Demaneu tot el servei a personal de servei qualificat. El manteniment és necessari quan l'aparell s'ha fet malbé d'alguna manera, com ara el cable d'alimentació o l'endoll està danyat, s'ha vessat líquid o han caigut objectes a l'aparell, l'aparell ha estat exposat a la pluja o la humitat, no funciona amb normalitat. , o s'ha deixat caure.
3. Contingut del paquet
The Fluid Audio C5 2-Way 5 Inch Active Studio Monitor package includes:
- Fluid Audio C5 Studio Monitor Speaker (Pair)
- Cable d'alimentació desmuntable
- Bare speaker wire
- 3.5mm headphone to RCA cable
- Acoustic Isolation Pads
4. Producte acabatview
4.1 Tauler frontal sobreview
The front panel features the 5-inch woofer and 1-inch tweeter, designed for accurate sound reproduction. The woofer is responsible for low-frequency sounds, while the tweeter handles high frequencies.

Figura 1: Frontal view of the Fluid Audio C5 Studio Monitor.
4.2 Panell posterior per sobreview
The rear panel houses all the input connections, power switch, volume control, and acoustic tuning options. These controls allow you to adapt the monitor's sound to your specific listening environment.

Figura 2: posterior view of the Fluid Audio C5 Studio Monitor.
5. Configuració
5.1 Col·locació
Position your C5 monitors on a stable surface, ideally at ear level, forming an equilateral triangle with your listening position. Ensure there is adequate space around the monitors for proper ventilation.
5.2 Connexions
The C5 monitors offer various input options:
- Entrades equilibrades: Use the 1/4-inch TRS or XLR inputs for professional audio interfaces and mixers. These connections minimize noise interference.
- Entrades desequilibrades: Use the RCA input for consumer-grade audio equipment.
Connect the power cord to the AC input on the rear panel and then to a suitable power outlet.
5.3 Acoustic Tuning
The rear panel features controls to adjust the monitor's frequency response to your room acoustics:
- Volum: Ajusta el nivell de sortida general.
- Mitjà: Adjusts the mid-range frequencies.
- Alt: Adjusts the high-range frequencies.
- Low Cutoff: Filters out low frequencies, useful when paired with a subwoofer.
- Acoustic Space: Compensates for bass buildup when monitors are placed near walls or corners.
6. Instruccions de funcionament
- Assegureu-vos que totes les connexions d'àudio estiguin ben fixades abans d'engegar-lo.
- Turn the volume knob on the rear panel to its minimum setting.
- Flip the power switch to the 'On' position.
- Gradually increase the volume to your desired listening level.
- When finished, turn the volume down before powering off the monitors.
7. Manteniment
- Neteja: Use a soft, dry cloth to clean the exterior of the monitors. Avoid abrasive cleaners or solvents.
- Pols: Regularly dust the drivers and vents to prevent accumulation.
- Medi ambient: Keep the monitors in a dry environment, away from extreme temperatures and direct sunlight.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so | Power off, incorrect input, volume too low. | Check power connection, select correct input, increase volume. |
| So distorsionat | Input signal too high, faulty cable. | Reduce input level, try a different cable. |
| Hum o Buzz | Ground loop, unshielded cables. | Use balanced cables, check grounding, try different power outlets. |
9. Especificacions
| Característica | Especificació |
|---|---|
| Tipus d'altaveu | 2-Way Active Studio Monitor |
| Diàmetre del woofer | 5 polzades |
| Diàmetre del Tweeter | 1 polzades |
| AmpPoder més viu | 2 x 20 Watts (40W total) |
| Resposta de freqüència | 54 Hz - 22 kHz |
| Freqüència de creuament | 4.5 kHz |
| Ràtio senyal / soroll | > 90 dB (ponderació A) |
| Impedància d'entrada | 20 k ohms balanced, 10 k ohms unbalanced |
| Entrada Voltage | Fixed 110V ~50/60 Hz or 220V~50/60 Hz |
| Tecnologia de connectivitat | RCA, TRS |
| Pes de l'article | 10 lliures |
10. Garantia i Suport
The Fluid Audio C5 Studio Monitor comes with a Garantia limitada d'2 any. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Fluid Audio weblloc.







