1. Informació de seguretat
ADVERTIMENT: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper wiring can result in electric shock or fire.
PRECAUCIÓ: For your safety, read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal.
- Assegureu-vos que totes les connexions elèctriques compleixin els codis i les ordenances locals, així com el Codi Elèctric Nacional (NEC).
- Consulteu un electricista qualificat si no teniu clar quins són els procediments de cablejat.
- This fixture is ETL Safety Listed and Damp rated for use in bathrooms.
- Do not exceed the maximum bulb wattage de 60 watts per bombeta.
- Always use the recommended bulb type (Standard A19 with Medium base E-26).
2. Contingut del paquet
Carefully unpack the fixture and check that all parts are included. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer service for assistance.
- Vanity Light Fixture (Brushed Nickel)
- 3 Frosted Opal Glass Shades
- Maquinari de muntatge (cargols, femelles, placa de muntatge)
- Manual d'instruccions
Nota: Bulbs are not included. Three 60-watt A19 bulbs with a Medium base (E-26) are required (sold separately).
3. Configuració i instal·lació
Before beginning installation, ensure the power is turned off at the circuit breaker. This fixture is designed for hardwired installation.
3.1 Eines necessàries (no incloses)
- Tornavís (Phillips i Flathead)
- Pelafils
- Alicates
- Cinta elèctrica
- Ulleres de seguretat
3.2 Passos d'instal·lació
- Apagueu l'alimentació: Locate the circuit breaker or fuse box and turn off the power to the electrical box where the fixture will be installed.
- Preparació de la superfície de muntatge: Remove any existing fixture and its mounting hardware. Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- Col·loqueu la placa de muntatge: Secure the provided mounting plate to the electrical box using the screws included in the hardware kit.
- Fer connexions elèctriques:
- Connect the bare copper ground wire from the fixture to the ground wire from the electrical box (usually bare copper or green) using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the electrical box using a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the electrical box using a wire nut.
- Ensure all connections are secure and wrap them with electrical tape for added safety.
- Fixació de muntatge: Carefully align the fixture with the mounting plate and secure it using the provided screws.
- Install Shades: Gently attach the three frosted opal glass shades to the fixture.
- Instal·leu les bombetes: Screw in three 60-watt A19 Medium base (E-26) bulbs (not included) into the sockets.
- Restaura l'alimentació: Torneu a encendre l'alimentació al disjuntor.
Image 1: The Merington 3-Light Vanity Light installed in a bathroom, showcasing its brushed nickel finish and frosted opal shades.
Imatge 2: Un apropament view of the frosted opal glass shades, highlighting their texture and the brushed nickel fixture.
4. Funcionament
This vanity light is operated via a standard wall switch (not included). Once installed and powered, simply use the wall switch to turn the light fixture on or off.
- Direcció d'il·luminació: The fixture can be installed with the shades facing up or down, depending on your preference and desired lighting effect.
- Substitució de bombetes: To replace bulbs, ensure the power is off at the circuit breaker. Allow bulbs to cool before touching. Unscrew old bulbs and screw in new ones of the correct type and wattage.
Video 1: A demonstration of the Allen + Roth Merington Bathroom Vanity Light in operation, highlighting its elegant illumination and design.
5. Manteniment
Regular maintenance will help preserve the appearance and functionality of your vanity light fixture.
- Neteja: Turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Cura de l'ombra: The frosted opal glass shades can be gently wiped with a damp cloth. Ensure they are completely dry before restoring power.
- Inspecció: Periodically check all electrical connections and mounting hardware for tightness.
6. Solució De Problemes
Si teniu problemes amb el llum de tocador, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. |
|
|
| La llum parpelleja. |
|
|
| El dispositiu brunzeix. |
|
|
If the problem persists after trying these solutions, consult a qualified electrician or contact customer support.
7. Especificacions
| Característica | Detall |
|---|---|
| Nom del model | Merington 3-Light |
| Número de model | VBS271-3BNK |
| Marca | Allen + Roth |
| Tipus | Barra de llum de tocador |
| Nombre de llums | 3 |
| Acabat de l'aparell | Níquel raspallat |
| Material d'ombra | Frosted Opal Glass |
| Material de fixació | Metall |
| Dimensions (L x A x A) | 21.5 x 5.5 x 9 polzades |
| Pes de l'article | 6.6 lliures |
| Font d'alimentació | Cablejat |
| Voltage | 120 Volts |
| Bombeta màxima Wattage | 60 Watts (per bulb) |
| Tipus de base de bombeta | Medium base (E-26) |
| Forma de bombeta recomanada | A19 |
| Regulable | No |
| Valoració d'ús | Damp rated (suitable for bathrooms) |
| Llistat de seguretat | Llistat per ETL |
| UPC | 080629712713 |
8. Garantia i assistència
Per obtenir informació sobre la garantia o assistència tècnica, consulteu el lloc web oficial del fabricant. weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
Fabricant: Allen + Roth
Política de devolució: This product typically has a 30-day return/replacement policy. Please check with your retailer for specific return terms.
