1. Informació important de seguretat
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans d'instal·lar o fer el servei.
- Totes les connexions elèctriques han de complir els codis locals, les ordenances o el Codi Elèctric Nacional (NEC).
- Consulteu un electricista qualificat si no teniu clar quins són els procediments de cablejat.
- This fixture is designed for outdoor, wet location use. Ensure all connections are properly sealed to prevent water intrusion.
- Do not attempt to modify the integrated LED light source. It is not replaceable.
2. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- 1 x VAXCEL Melbourne Post Light Fixture (with integrated LED)
- 1 x Clear Crackle Glass Shade
- Maquinari de muntatge (cargols, femelles de cable)
3. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | T0165 |
| Dimensions (L x A x A) | 8" x 8" x 16" |
| Pes | 3.97 lliures |
| Material | Acer d'aliatge, vidre |
| Font de llum | Integrated LED (6 Watts) |
| Brillantor | 300 lúmens |
| Temperatura de color | 3000 Kelvin (Blanc càlid) |
| Índex de reproducció del color (CRI) | 82 |
| Voltage | 120 Volts |
| Característiques especials | Dusk to Dawn Sensor, Exterior Wet Rated |
| Tipus de muntatge | Post Mounted (fits standard 3-inch diameter post, not included) |
4. Instruccions d'instal·lació (Configuració)
Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed to be mounted on a standard 3-inch diameter post (post not included).
- Prepare the Post: Ensure your existing 3-inch diameter post is securely installed and has electrical wiring extending from its top.
- Connecteu el cablejat: Carefully connect the fixture's wires to your household electrical wires. Use the provided wire nuts to secure connections:
- Connect the black wire from the fixture to the black (hot) wire from the post.
- Connect the white wire from the fixture to the white (neutral) wire from the post.
- Connect the green or bare copper ground wire from the fixture to the green or bare copper ground wire from the post.
- Muntar l'aparell: Carefully place the fixture onto the top of the 3-inch post, aligning any pre-drilled holes if applicable. Secure the fixture to the post using the provided mounting screws. Do not overtighten.
- Instal·leu l'ombra de vidre: Gently place the clear crackle glass shade into the fixture, ensuring it is seated properly and securely.
- Restaura l'alimentació: Once the fixture is securely mounted and all connections are made, restore power at the circuit breaker.
5. Instruccions de funcionament
The VAXCEL Melbourne Post Light features an integrated dusk-to-dawn photocell sensor for automatic operation. There are no manual controls for this light fixture.
- Encès/Apagat automàtic: The photocell sensor (refer to Figure 3) detects ambient light levels. The fixture will automatically turn on when it gets dark and turn off when it detects sufficient daylight.
- Funcionament inicial: Upon initial power-up, the light may take a few minutes to calibrate or may turn on briefly before turning off if it is daytime. This is normal operation.
6. Manteniment
Regular maintenance will help preserve the appearance and functionality of your VAXCEL Melbourne Post Light.
- Neteja: Per netejar l'aparell, assegureu-vos que l'alimentació estigui apagada. Netegeu amb un drap suau i sec.amp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o el vidre.
- Font de llum LED: The LED light source is integrated and designed for long-lasting performance. It is not user-replaceable.
- Fotocèl·lula: Keep the photocell sensor (Figure 3) free from dirt, debris, or obstructions (e.g., leaves, snow) to ensure proper dusk-to-dawn operation.
7. Solució De Problemes
If your VAXCEL Melbourne Post Light is not functioning as expected, refer to the following common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén a la nit. | No hi ha energia a l’aparell. La fotocèl·lula està obstruïda o defectuosa. Problema de cablejat. | Check circuit breaker and wall switch (if applicable). Ensure photocell is clean and not blocked by objects. Verify wiring connections are secure (with power off). |
| La llum es manté encesa durant el dia. | La fotocèl·lula està obstruïda o defectuosa. Insufficient ambient light reaching the sensor. | Ensure photocell is clean and not blocked. Relocate the fixture if it's in a shaded area during the day. |
| La llum parpelleja o s'atenua. | Connexió de cablejat solta. Fluctuacions de potència. | Check all wiring connections (with power off). Consulteu un electricista si sospiteu fluctuacions de corrent. |
If these steps do not resolve the issue, please contact VAXCEL customer support.
8. Informació de la garantia
The VAXCEL Melbourne 1L LED Dusk to Dawn Outdoor Post Light (Model T0165) is covered by a Garantia limitada d'5 any from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the VAXCEL official weblloc o contacteu amb el servei d'atenció al client.
9. Informació de contacte
For further assistance, technical support, or warranty claims, please contact VAXCEL customer service:
- Weblloc: Visit the VAXCEL Store on Amazon
- Please have your model number (T0165) and proof of purchase ready when contacting support.
