YILONG YL Thermal Tattoo Stencil Printer Machine User Manual

1. Introducció

This manual provides detailed instructions for the safe and efficient operation of your YILONG YL Thermal Tattoo Stencil Printer Machine. Please read this manual thoroughly before using the device to ensure proper function and longevity.

2. Informació de seguretat

• Ensure the power supply matches the device's requirements (AC 110V-220V; 50Hz/0.46A).
• Do not operate the machine continuously for extended periods. Allow it to cool down after transferring 1-2 sheets to prevent overheating and protect the printer mechanism.
• Unplug the machine when not in use to prevent potential overheating and conserve energy.
• Mantingueu el dispositiu allunyat de l'aigua o altres líquids.
• Do not attempt to disassemble or repair the machine yourself. Contact qualified service personnel for assistance.
• Mantenir fora de l'abast dels nens.

3. Producte acabatview

Familiarize yourself with the components and controls of your thermal stencil printer.

Figura 3.1: YILONG YL Thermal Tattoo Stencil Printer Machine with key components labeled.

• Transfer Paper Input: Slot for inserting transfer paper.
• Tauler d'operacions: Contains control buttons and indicator lights.
• Llum indicador d'alimentació: Indica l'estat d'alimentació.
• Canvi: Interruptor d’encesa / apagat.
• Llum d'advertència: Indica errors o avisos.
• Start of Work (COPY button): Initiates the transfer process.
• Document Output: Where the original document exits.
• Document Feeder: Slot for inserting the original document.
• Transfer Paper Output: Where the stenciled transfer paper exits.
• MIRROR/NORMAL: Mode selection for mirror or normal copy.
• DEEPNESS 1/DEEPNESS 2: Depth level adjustments for transfer quality.
• STOP: Halts the current operation.

4. Configuració

1. Desempaquetar la màquina: Carefully remove the thermal stencil printer from its packaging.
2. Col·loca la màquina: Position the machine on a stable, flat surface with adequate ventilation.
3. Connectar l'alimentació: Connecteu el cable d'alimentació a la màquina i després a una presa de corrent adequada.
4. Encès: Flip the power switch to the "ON" position. The Power Indicator Light should illuminate.

5. Funcionament

Follow these steps to create a tattoo stencil using your YILONG YL Thermal Tattoo Stencil Printer Machine.

5.1 Loading Paper and Document

1. Obriu la coberta: Open the cover of the transfer machine by pulling up on both sides.
   

   Figura 5.1: Opening the cover of the thermal transfer machine.

2. Load Transfer Paper: Load the transfer paper from the back of the machine into the Transfer Paper Input slot. Ensure the paper is inserted straight and smoothly.
   

   Figura 5.2: Loading transfer paper into the machine.
3. Place Original Pattern: Place your original pattern (document) onto the Document Feeder slot at the front of the machine. Ensure the pattern faces down and is aligned correctly.
   

   Figura 5.3: Placing the original pattern for transfer.

5.2 Setting Copy Modes and Depth

• Mirror/Normal Mode: Select "MIRROR" for standard tattoo stencils (most common) or "NORMAL" if your design does not need to be mirrored.
• Deepness Settings: Adjust the "DEEPNESS" setting (1 or 2) based on the desired darkness and detail of the stencil. Experiment to find the best setting for your specific design and transfer paper.

5.3 Starting the Transfer

1. Press COPY: Once the paper and document are loaded and settings are selected, press the "COPY" button to start the transfer process.
2. Supervisar el progrés: The machine will feed the document and transfer paper through, creating the stencil.
3. Retrieve Stencil: Once the process is complete, retrieve the stenciled transfer paper from the Transfer Paper Output.
   

   Figura 5.4: Examples of high-quality transferred stencils.

4. Rest Period: To ensure optimal transfer effect and protect the machine, allow it to rest for a few minutes after transferring 1-2 sheets. Avoid continuous operation for prolonged periods.

5.4 Demostració en vídeo

For a visual guide on setting up and operating the machine, please watch the official product video below.

6. Manteniment

• Rodets de neteja: Regularly clean the rubber guide rollers to prevent ink buildup, which can affect paper feeding and transfer quality. Use a soft, damp tela.
• Eliminació de pols: Keep the machine free from dust and debris. Use a soft brush or compressed air to clean vents and paper paths.
• Emmagatzematge: When not in use, store the machine in a dry, cool place, away from direct sunlight and extreme temperatures.

7. Solució De Problemes

8. Especificacions

Figura 8.1: Technical specifications of the YILONG YL Thermal Tattoo Stencil Printer Machine.

• Element: Thermal Stencil Transfer Copier / Tattoo Transfer Machine
• Mode d'escaneig: CIS
• Effective Scanning Width: 210 mm
• Tipus de document: Fine/Photo
• Mida del document: A5-A4
• Gruix del document: 0.06 mm - 0.15 mm
• Mode d'enregistrament: TPH
• Amplada efectiva d'impressió: 210 mm
• Potència: AC 110V-220V; 50Hz/0.46A
• Consum d'energia: En espera 5 W
• Temperatura de treball: 5 °C - 35 °C
• Humitat relativa: 20% - 80%
• Pes: 1.17 kg
• Dimensions (L x P x A): 290 mm x 180 mm x 80 mm
• Tecnologia de connectivitat: USB
• Tecnologia d'impressió: Tèrmica
• Característica especial: Portable, Decal Printing
• Color: Negre
• Sortida de la impressora: Monocrom
• Tipus de controlador: Control de botons
• Mida màxima del suport: 8.5 x 11 polzades

9. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official YILONG weblloc web. Conserveu el rebut de compra com a comprovant de compra.