Philips Lighting ER55LD3WR LED Exit Sign User Manual

Introducció

This manual provides essential information for the safe and efficient use of your Philips Lighting ER55LD3WR LED Exit Sign. Please read these instructions carefully before installation and operation, and retain them for future reference. This product is designed for commercial lighting applications, specifically as a lighted exit sign.

Informació de seguretat

• Desconnecteu sempre l'alimentació abans d'instal·lar o fer el manteniment de la unitat.
• La instal·lació l'ha de dur a terme un electricista qualificat d'acord amb les normes elèctriques nacionals i locals.
• No utilitzeu aquest producte per a finalitats diferents a les previstes.
• Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
• Mantenir allunyat de l'aigua i la humitat excessiva.

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Philips Lighting ER55LD3WR LED Exit Sign unit
• Maquinari de muntatge (cargols, ancoratges)
• Manual d'instruccions (aquest document)

Configuració i instal·lació

The Philips Lighting ER55LD3WR LED Exit Sign is designed for wall mounting. Ensure the mounting surface is suitable to support the weight of the unit.

1. Prepareu l'àrea d'instal·lació: Disconnect power to the circuit where the exit sign will be installed.
2. Muntatge:
   • Identify the desired wall mounting location.
   • Use the provided mounting hardware to securely attach the exit sign to the wall. Ensure the unit is level.
3. Cablejat:
   • Connect the building's 120V AC power supply to the corresponding wires on the exit sign. Refer to the wiring diagram inside the unit's housing for specific connections.
   • Assegureu-vos una correcta connexió a terra.
   • Connect the internal battery (if not pre-connected). This is crucial for emergency operation.
4. Assemblea final: Secure any covers or diffusers.

Figura 1: Frontal view of the Philips Lighting ER55LD3WR LED Exit Sign. This image shows the white housing with the red "EXIT" lettering illuminated, indicating its primary function as an emergency egress indicator.

Instruccions de funcionament

Once installed and power is restored, the Philips Lighting ER55LD3WR LED Exit Sign will operate automatically.

• Funcionament normal: When AC power is present, the "EXIT" sign will be illuminated by the internal LEDs. The green indicator light on the unit will be ON, signifying operating status.
• Operació d'emergència: In the event of an AC power failure, the unit will automatically switch to battery backup, illuminating the "EXIT" sign for a specified duration (typically 90 minutes).
• Botó de prova: A test button is provided on the unit to verify emergency operation. Press and hold the "Push to Test" button to simulate an AC power failure. The sign should remain illuminated, and the green indicator light will blink, indicating testing. Release the button to return to normal operation.

Figura 2: Primer pla view of the test button and indicator lights on the Philips Lighting ER55LD3WR LED Exit Sign. The green indicator shows operating status (ON for ready, Blinking for testing). The red indicator shows service alerts such as battery, charger board, transformer, or LED strip faults.

Manteniment

Regular maintenance ensures the reliability and longevity of your LED Exit Sign.

• Prova mensual: Press the "Push to Test" button for at least 30 seconds to ensure the battery backup system is functioning. The sign should remain illuminated.
• Prova anual: Disconnect AC power to the unit for 90 minutes to verify the battery can sustain emergency illumination for the required duration.
• Neteja: Netegeu l'exterior de la unitat amb un damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Substitució de la bateria: The internal battery has a limited lifespan. If the unit fails to hold a charge or the red "Battery fault" indicator illuminates, the battery may need replacement. Contact qualified service personnel for battery replacement.

Resolució de problemes

Consulteu la taula següent per veure els problemes habituals i les seves solucions.

Especificacions

Garantia i Suport

For warranty information or technical support, please contact Philips Lighting customer service. Keep your purchase receipt as proof of purchase.

Fabricant: Il·luminació Philips

Weblloc: Visita la botiga PHILIPS a Amazon