Introducció
Welcome to the user manual for your Scangrip Lighting A1934133035026 03.5026 LED Headlamp. This manual provides essential information for the safe and efficient use of your new headlamp. Please read it thoroughly before operation and keep it for future reference.
Instruccions de seguretat
Per garantir un funcionament segur i evitar danys, si us plau, seguiu les següents pautes de seguretat:
- No mireu directament el raig de llum. La llum intensa pot causar una discapacitat visual temporal o danys oculars.
- Mantingueu el capamp away from water and moisture. This product is no resistent a l'aigua.
- No intenteu desmuntar ni modificar el capçalampAixò anul·larà la garantia i pot causar danys o lesions.
- Use only the charging cable provided or a compatible charger specified by Scangrip.
- Guardeu el capamp en un lloc fresc i sec quan no s'utilitzi.
- Mantenir fora de l'abast dels nens.
Producte acabatview
The Scangrip A1934133035026 03.5026 is a compact, rechargeable LED headlamp designed for various tasks requiring hands-free illumination. It features a wide light pattern and two brightness settings, making it ideal for detailed work and general purpose lighting.
Image: The Scangrip LED Headlamp providing illumination for a mechanic performing detailed work on a vehicle's brake system. The headlamp is worn comfortably on the head, casting a broad, even light on the work area.
Configuració
Carregant el Headlamp
Before first use, fully charge your Scangrip LED Headlamp. The device is powered by a Lithium Ion battery.
- Locate the charging port on the headlamp.
- Connect the provided Scangrip-specific charging cable to the headlamp and a suitable USB power source (e.g., computer USB port, USB wall adapter).
- The charging indicator light will illuminate, typically red during charging and green when fully charged.
- Una càrrega completa sol trigar aproximadament 3 hores.
Ajust de la corretja del cap
For optimal comfort and stability, adjust the elastic head strap to fit your head securely.
- Col·loca el capçalamp al teu front.
- Adjust the strap length using the buckle until it feels snug but not too tight.
- Ensure the foam pad rests comfortably against your forehead.
Instruccions de funcionament
Modes d'encesa/apagada i brillantor
El capamp features two buttons for control:
- Botó d'encesa: Press once to turn the headlamp on to the low brightness setting. Press again to switch to the high brightness setting. A third press will turn the headlamp apagat.
- Motion Sensor Button: Press this button to activate the hands-free motion sensor function.
Funció de sensor de moviment
When the motion sensor function is active, you can turn the light on or off by waving your hand in front of the sensor.
- Activate the motion sensor by pressing its dedicated button.
- Wave your hand approximately 2-5 inches (5-12 cm) in front of the headlamp to toggle the light on or off.
- Nota: Be mindful of accidental activation if working in confined spaces or with frequent hand movements near the sensor.
Manteniment
Neteja
Regular cleaning helps maintain the performance and longevity of your headlamp.
- Netegeu l'exterior del capçalamp amb un suau, damp tela.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the housing or lens.
- The foam pad on the head strap can be wiped clean to prevent sweat absorption.
Cura de la bateria
Proper battery care ensures maximum battery life and performance.
- Carregueu el capamp regularly, even if not in frequent use, to prevent deep discharge.
- Avoid storing the headlamp with a completely depleted battery for extended periods.
- Si el capamp will not be used for a long time, charge it to approximately 50% before storage.
Resolució de problemes
If you encounter issues with your headlamp, consulteu els problemes i solucions habituals següents:
| Problema | Causa possible | Solució |
|---|---|---|
| Capamp no s'encén. | La bateria està esgotada. | Carregueu el capamp plenament. |
| La llum és tènue o parpelleja. | Baixa càrrega de la bateria. | Recarrega el capamp. |
| Motion sensor activates accidentally or does not respond. | Obstruction or dirt on sensor; rapid hand movements. | Clean the sensor area. Be mindful of hand placement during use. Try turning the motion sensor function off and on again. |
| La durada de la bateria és més curta del que s’esperava. | Operating on high brightness continuously; battery degradation over time. | Use low brightness when sufficient. Ensure full charge before use. Battery capacity naturally decreases over many charge cycles. |
Especificacions
Key technical specifications for the Scangrip Lighting A1934133035026 03.5026 LED Headlamp:
- Número de model: A1934133035026 (03.5026)
- Marca: Scangrip
- Tipus de font de llum: LED
- Brillantor blanc: 80 lúmens
- Font d'alimentació: Funciona amb bateria
- Tipus de bateria: Ió de liti
- Nombre de bateries: 1 (obligatori)
- Característica especial: Recarregable
- Color: Negre
- Tipus de muntatge: Muntatge del cap
- Nivell de resistència a l'aigua: No resistent a l'aigua
- Pes de l'article: 120 grams
- Fabricant: Scangrip Lighting
Garantia i Suport
Scangrip products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Scangrip weblloc.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding spare parts, please contact Scangrip customer service through their official channels. Contact details can typically be found on the product packaging or the Scangrip weblloc.
