EBERTH GG1-ER196-6,5-19,5E

EBERTH 6.5 HP Gasoline Engine Instruction Manual

Model: GG1-ER196-6,5-19,5E

1. Introducció

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your EBERTH 6.5 HP Gasoline Engine, Model GG1-ER196-6,5-19,5E. Please read these instructions carefully before using the engine to ensure proper function and longevity.

2. Instruccions de seguretat

Always prioritize safety when operating or maintaining the engine. Failure to follow safety guidelines can result in serious injury or equipment damage.

  • Llegeix el manual: Familiarize yourself with all controls and proper operating procedures.
  • Ventilació: Operate the engine in a well-ventilated area. Exhaust fumes contain carbon monoxide, which is a colorless, odorless, and deadly gas.
  • Manipulació de combustible: Handle gasoline with extreme care. It is highly flammable. Store fuel in approved containers away from ignition sources.
  • Superfícies calentes: El motor i el sistema d'escapament s'escalfen molt durant el funcionament i romanen calents durant un període després de l'apagada. Eviteu el contacte per evitar cremades.
  • Parts mòbils: Mantingueu les mans, els peus i la roba allunyats de les peces giratòries.
  • Apagada del motor: Always turn off the engine before performing any maintenance, adjustments, or refueling.
  • Nens i animals de companyia: Keep children and pets away from the engine, especially during operation.

3. Producte acabatview

The EBERTH 6.5 HP Gasoline Engine is a robust 4-stroke, single-cylinder engine with a 196 ccm displacement, designed for various applications such as karts, lawnmowers, generators, and more. It features both electric and manual pull-start options, along with a low oil safety shutdown.

EBERTH 6.5 HP Gasoline Engine side view
Figura 3.1: lateral view of the EBERTH 6.5 HP Gasoline Engine.
costat del motor view with pull start and control panel
Figure 3.2: Engine side showing the pull start mechanism and control panel.
costat del motor view with EBERTH logo and electric start motor
Figure 3.3: Engine side displaying the EBERTH logo and electric start motor.
Close-up of the engine output shaft
Figure 3.4: Detail of the 19.05mm diameter output shaft.

4. Configuració

4.1 Desembalatge i inspecció

Carefully remove the engine from its packaging. Inspect for any signs of damage during transit. Ensure all included components (engine, user manual, toolkit, 7Ah 12V battery, two ignition keys) are present.

4.2 Afegir oli de motor

The engine is shipped without oil. Before first use, fill the crankcase with the recommended engine oil (e.g., SAE 10W-30) up to the upper mark on the dipstick. The oil capacity is typically around 0.6 liters. Do not overfill.

Checking engine oil level with dipstick
Figure 4.1: Checking the oil level using the dipstick.

4.3 Afegir combustible

Fill the fuel tank with unleaded gasoline. The tank capacity is 3.6 liters. Do not fill above the red indicator or the bottom of the filler neck to allow for fuel expansion. Ensure the fuel cap is securely tightened after refueling.

Adding fuel to the engine tank with a funnel
Figure 4.2: Filling the fuel tank.

4.4 Connecting the Battery (Electric Start Models)

For models equipped with electric start, connect the provided 7Ah 12V battery. Ensure correct polarity: positive (+) to positive, negative (-) to negative. The battery recharges automatically during engine operation.

Close-up of the battery connection for electric start
Figure 4.3: Battery connection for electric start.

4.5 Muntatge del motor

Mount the engine securely to your equipment (e.g., kart, lawnmower) using appropriate bolts and fasteners. Refer to the technical drawing for mounting dimensions and ensure proper alignment with the driven component.

EBERTH engine mounted on a kart chassis
Figura 4.4: Example of engine mounting on a kart.

5. Funcionament

5.1 Arrencada del motor (arrencada elèctrica)

  1. Assegureu-vos que la vàlvula de combustible estigui oberta.
  2. Set the choke lever to the 'CHOKE' position if the engine is cold.
  3. Turn the engine switch to the 'RUN' position.
  4. Introduïu la clau al contacte i gireu-la a la posició «START». Deixeu anar la clau un cop el motor s'hagi engegat.
  5. Moveu gradualment la palanca de l'estrangulador a la posició "RUN" a mesura que el motor s'escalfa.
Close-up of the engine control panel with ignition key
Figure 5.1: Engine control panel for electric start.

5.2 Starting the Engine (Manual Pull Start)

  1. Assegureu-vos que la vàlvula de combustible estigui oberta.
  2. Set the choke lever to the 'CHOKE' position if the engine is cold.
  3. Turn the engine switch to the 'RUN' position.
  4. Pull the starter grip slowly until resistance is felt, then pull firmly and quickly. Do not let the rope snap back; guide it gently.
  5. Repetiu fins que arrenqui el motor.
  6. Moveu gradualment la palanca de l'estrangulador a la posició "RUN" a mesura que el motor s'escalfa.

5.3 Parar el motor

  1. Move the throttle lever to the 'IDLE' position.
  2. Gireu l'interruptor del motor a la posició 'OFF'.
  3. Close the fuel valve for storage or extended periods of non-use.

5.4 Low Oil Shutdown Feature

This engine is equipped with a low oil safety feature that automatically shuts down the engine if the oil level drops below a safe operating threshold. This protects the engine from damage. If the engine stops unexpectedly, check the oil level and refill if necessary before attempting to restart.

6. Manteniment

Regular maintenance is crucial for the performance and lifespan of your EBERTH engine.

6.1 Comprovació del nivell d'oli

Check the engine oil level before each use. Ensure the engine is on a level surface. Unscrew the dipstick, wipe it clean, reinsert it without screwing it in, then remove and check the oil level. Add oil if it is below the lower mark.

6.2 Manteniment del filtre d'aire

Clean the air filter regularly, especially when operating in dusty conditions. A dirty air filter can reduce engine performance and increase fuel consumption. Remove the air filter cover, take out the foam element, and clean it with warm, soapy water. Rinse thoroughly, let it dry completely, and then lightly oil it with engine oil before reassembling.

Cleaning the engine air filter element
Figure 6.1: Cleaning the air filter.

6.3 Manteniment de la bugia

Inspect the spark plug periodically. Clean any carbon deposits with a wire brush and adjust the gap if necessary according to specifications in the technical data. Replace the spark plug if it is heavily fouled or damaged.

Cleaning the engine spark plug with a wire brush
Figure 6.2: Cleaning the spark plug.

6.4 Emmagatzematge

For long-term storage, drain the fuel tank and carburetor, or add a fuel stabilizer. Change the engine oil. Clean the engine exterior. Store in a dry, clean area.

7. Solució De Problemes

This section addresses common issues you might encounter with your EBERTH engine.

ProblemaCausa possibleSolució
El motor no arrencaNo fuel, old fuel, low oil, spark plug issue, choke setting incorrect, battery low (electric start)Check fuel level, replace old fuel, add oil, inspect/clean/replace spark plug, adjust choke, charge/check battery.
El motor funciona malament/falta potènciaDirty air filter, old fuel, incorrect spark plug gap, carburetor issuesClean air filter, use fresh fuel, check spark plug, consult service for carburetor.
El motor s'atura de manera inesperadaLow oil shutdown activated, lack of fuel, overheatingCheck oil level, refill fuel, allow engine to cool, ensure proper ventilation.

If you encounter problems not listed here or if solutions do not resolve the issue, please contact EBERTH customer support or a qualified service technician.

8. Especificacions

Technical data for the EBERTH 6.5 HP Gasoline Engine.

Technical drawing with engine dimensions
Figure 8.1: Engine dimensions and technical drawing.
CaracterísticaEspecificació
ModelGG1-ER196-6,5-19,5E
Tipus de motor4-stroke, 1-cylinder, air-cooled
Desplaçament196 ccm
Potència de sortida6.5 CV / 4.8 kW
Velocitat màxima3600 rpm
Diàmetre de l'eix19.05 mm
Sistema d'iniciElectric start (12V battery) and Manual pull start
Tipus de combustibleGasolina sense plom
Capacitat del dipòsit de combustible3.6 L
Seguretat del petroliTancament de petroli baix
MaterialAlumini
Dimensions del producte (L x A x A)40 x 33.5 x 38 cm
Pes16 kg
País d'origenXina

9. Garantia

The EBERTH 6.5 HP Gasoline Engine comes with a Garantia del fabricant de 2 anysSi us plau, conserveu el comprovant de compra per a reclamacions de garantia. La garantia cobreix defectes de materials i fabricació en condicions d'ús i manteniment normals.

10. Suport

For technical assistance, spare parts, or warranty inquiries, please contact EBERTH customer service. EBERTH maintains a large stock of spare parts to ensure quick availability and delivery.

For more information, visit the official EBERTH weblloc o poseu-vos en contacte amb el vostre distribuïdor local.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.