Introducció
The OtterBox Defender Series case is engineered to provide robust protection for your Apple iPhone 6 Plus or iPhone 6s Plus. This case features a multi-layer design to guard against drops, dust, and damage, ensuring the usability of your phone's features remains uncompromised. It is constructed from a high-impact polycarbonate shell, a durable synthetic rubber slipcover, and includes a built-in screen protector for comprehensive device security.
Contingut del paquet
Verifiqueu que tots els components siguin presents al vostre paquet:
- OtterBox Defender Series Case (Polycarbonate Shell, Synthetic Rubber Slipcover, Built-in Screen Protector)
- Funda de clip de cinturó
Image: The OtterBox Defender Series case, including the main case and the detachable belt clip holster.
Setup Guide: Case Installation
Follow these steps to properly install your iPhone 6 Plus or 6s Plus into the Defender Series case:
- Separa les capes: Carefully pry apart the outer synthetic rubber slipcover from the inner polycarbonate shell. The inner shell consists of two pieces. Separate these two pieces.
- Insert Phone into Inner Shell: Place your iPhone 6 Plus/6s Plus into the front half of the polycarbonate shell, ensuring the built-in screen protector aligns correctly with your phone's screen.
- Close Inner Shell: Snap the back half of the polycarbonate shell onto the front half, securing your phone firmly within. Ensure all edges are sealed.
- Apply Outer Slipcover: Stretch the synthetic rubber slipcover over the assembled polycarbonate shell. Ensure all corners and edges are fully covered and the port covers are properly seated.
Imatge: Una explosió view demonstrating the three protective layers of the Defender Series case: the inner polycarbonate shell, the built-in screen protector, and the outer synthetic rubber slipcover.
Instruccions de funcionament
Port Covers
The Defender Series case features integrated port covers designed to prevent dust, dirt, and debris from entering your phone's charging port and headphone jack. To access a port, gently lift the corresponding cover. Ensure the covers are firmly pressed back into place after use to maintain protection.
Image: Detail showing the protective port covers for the charging and headphone ports, along with accessible volume buttons.
Funda de clip de cinturó
The included holster provides an additional layer of screen protection and can be used as a kickstand for media viewing. To attach your phone to the holster, slide the phone (screen-side in for maximum protection) into the holster until it clicks securely. To use as a kickstand, rotate the clip to the desired angle and prop the phone up.
Protecció de pantalla
The case includes a built-in screen protector and a raised bumper around the screen edge. This design helps protect your device's screen from direct impacts and surface scratches when placed face down.
Image: Illustration of the raised bumper design, which provides additional screen protection by preventing direct contact with surfaces.
Manteniment
To maintain the effectiveness and appearance of your OtterBox Defender Series case, follow these simple cleaning guidelines:
- Neteja regular: Netegeu la carcassa regularment amb un drap suauamp drap per eliminar la pols i les taques.
- Neteja profunda: For more stubborn dirt, you may remove the case from your phone and gently wash the rubber slipcover and polycarbonate shell with mild soap and water. Ensure all components are completely dry before reassembling the case onto your phone.
- Eviteu productes químics durs: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the case materials or built-in screen protector.
Resolució de problemes
Screen Protector Sensitivity
If you experience reduced touch screen sensitivity after installing the case, especially if you have an additional tempered glass screen protector on your phone, consider the following:
- The Defender Series case includes a built-in screen protector. Using an additional screen protector may create an air gap or interfere with touch responsiveness. For optimal performance, it is recommended to use only the built-in screen protector.
- Ensure the built-in screen protector is clean and free of debris on both sides before installation.
Charging Cable Compatibility
The port covers are designed to fit standard Apple Lightning cables. Some third-party or non-Apple branded USB to Lightning cables, especially those with larger connectors or 30-pin to Lightning adapters, may not be compatible with the case's port opening. Ensure your charging cable fits properly without forcing it.
Especificacions
| Marca | OtterBox |
| Número de model | 77-52236 |
| Models de telèfon compatibles | iPhone 6s Plus, iPhone 6 Plus |
| Material | Polycarbonate shell, Synthetic rubber slipcover, Clear membrane screen protector, Polycarbonate holster |
| Nivell de resistència a l'aigua | No resistent a l'aigua |
| Dimensions de l'article (L x A x A) | 8.63 x 4.75 x 1.75 polzades |
| Pes de l'article | 8.16 unces |
Image: A visual guide confirming compatibility with iPhone 6 Plus and iPhone 6s Plus (5.5-inch models) and incompatibility with iPhone 6 and iPhone 6s (4.7-inch models).
Vídeo oficial del producte
Vídeo: Un funcionari ha acabatview of the OtterBox Defender Series, showcasing its protective features and design elements.
Informació de la garantia
The OtterBox Defender Series case for iPhone 6 Plus/6s Plus includes a limited lifetime warranty. For specific details regarding coverage, terms, and conditions, please refer to the official OtterBox weblloc.
Suport
Per a més ajuda, registre de productes o per a view frequently asked questions, please visit the official OtterBox support website. You can find contact information for customer service there if you require direct support.