Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) Instruction Manual

Introducció

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.

Contingut del paquet:

• Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
• Kit de ferreteria de muntatge (diversos cargols, ancoratges, volanderes)
• High Speed HDMI Cable (1080p 1.4v)
• 6-inch Tri-axis Spirit Level
• Manual d'instruccions

Figura 1: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.

Informació important de seguretat

WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and your television.
• Always use a stud finder to locate wood studs or ensure you are mounting into solid concrete/brick.
• Do not exceed the maximum load capacity of 36.2kg (80lbs).
• Aquest producte està dissenyat només per a ús interior.
• Assegureu-vos que tots els cargols estiguin ben ajustats, però no els estrenyeu massa.
• Mantingueu els nens i les mascotes allunyats durant la instal·lació.
• Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un professional qualificat.

Especificacions

Figura 2: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).

Configuració i instal·lació

1. Llista de verificació prèvia a la instal·lació

• Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
• Tipus de paret: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
• Eines necessàries: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
• Control de pes: Ensure your TV's weight does not exceed 36.2kg (80lbs).

Figura 3: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.

2. Attaching the TV Brackets to Your Television

1. Col·loqueu amb cura el televisor cara avall sobre una superfície suau i neta per evitar que es facin malbé la pantalla.
2. Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
3. Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.

3. Mounting the Wall Plate to the Wall

1. Determineu l'alçada de muntatge: Decide on the desired height for the top of your TV. Mark this on the wall.
2. Localitzar els montants (per a parets de fusta amb montants): Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
3. Posició de la placa de paret: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
4. Perforar forats pilot:
   • For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
   • For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
5. Placa de paret segura: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.

4. Hanging the Television

1. Amb ajuda, aixequeu amb cura el televisor amb els suports adjunts.
2. Enganxeu els suports del televisor a la placa de paret. Assegureu-vos que el televisor estigui ben fixat a la placa de paret.
3. Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.

Instruccions de funcionament

The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.

Figura 4: The mount's design allows for extensive swivel and tilt adjustments, providing optimal viewing angles from various positions in a room.

Ajust del gir

Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.

Ajust de la inclinació

To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.

Gestió de cables

The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.

Figura 5: Detallada view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.

Manteniment

• Inspecció periòdica: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
• Neteja: Netegeu el suport amb un drap suau i sec. Eviteu netejadors o dissolvents abrasius que puguin danyar l'acabat.
• Lubricació: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If you notice any stiffness, contact customer support.
• Límit de pes: Never exceed the maximum weight capacity of 36.2kg (80lbs).

Resolució de problemes

Informació de la garantia

The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a 25 anys de garantia del producte. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For warranty claims or further details, please contact Invision customer support.

Atenció al client

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.

Fabricant: Invision Technology (UK) Ltd

Número d'identificació comercial global (GTIN): 05060264551392

Please refer to the product packaging or the official Invision weblloc web per obtenir la informació de contacte més actualitzada.

Figura 6: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.