Lasco 31675OB
Lasco 31675OB Universal Trim Kit Instruction Manual
Model: 31675OB | Brand: Lasco
Introducció
Thank you for choosing the Lasco 31675OB Universal Trim Kit. This kit is designed to replace existing bath or shower trim, offering a fresh, oil rubbed bronze finish. This manual provides detailed instructions to ensure a smooth installation process, proper operation, and effective maintenance, helping you maximize the lifespan and performance of your new trim kit.
Producte acabatview
Components
- Maneta de la palanca
- Mànec de pom
- Escutcheon (Faceplate)
- Cargols de muntatge

Figura 1: The Lasco 31675OB Universal Trim Kit, featuring both a lever handle and a knob handle, along with the circular escutcheon plate, all in an oil rubbed bronze finish. The clear knob handle is visible on the left, and the dark lever handle is on the right, mounted on the dark circular escutcheon.
Configuració
Eines necessàries
- Clau anglesa ajustable
- Tornavís Phillips
- Tornavís de cap pla
- Massilla de lampista o segellador de silicona
- Drap de neteja
Passos d'instal·lació
- Tanqueu el subministrament d'aigua: Locate the main water shut-off valve for your home or the specific bathroom and turn it off. Open the existing faucet to drain any remaining water.
- Remove Old Trim: Carefully remove the existing handles, escutcheon, and any other visible trim components. You may need a screwdriver to loosen retaining screws.
- Superfície neta: Thoroughly clean the area around the valve body on the wall to ensure a smooth and secure installation of the new escutcheon.
- Install Escutcheon: Apply a thin bead of plumber's putty or silicone sealant around the back edge of the new escutcheon plate. Position the escutcheon over the valve body and secure it to the wall using the provided mounting screws. Ensure it is level and tight.
- Instal·leu les nanses: Attach the desired handle (lever or knob) to the valve stem. Secure it with the set screw, typically located on the underside of the handle. Test for proper engagement.
- Activeu el subministrament d'aigua: Slowly turn the main water supply back on. Check for any leaks around the newly installed trim.
- Prova de funcionament: Operate the handles to ensure proper water flow and temperature control.
Instruccions de funcionament
Funcionament bàsic
The Lasco 31675OB Universal Trim Kit allows for easy control of water flow and temperature. Depending on the handle type installed:
- Palanca de mà: Typically, rotating the lever handle controls water temperature (e.g., counter-clockwise for hot, clockwise for cold), while pulling it outwards or pushing it inwards controls water flow (on/off).
- Knob Handle: Rotating the knob handle controls water temperature, and pulling it outwards or pushing it inwards controls water flow.
Familiarize yourself with the specific movement of your installed handle to achieve the desired water temperature and pressure.
Manteniment
Neteja
To maintain the oil rubbed bronze finish and overall appearance of your trim kit, follow these cleaning guidelines:
- Utilitzeu un suau, damp cloth and mild soap (non-abrasive) for regular cleaning.
- Eviteu utilitzar netejadors abrasius, productes químics agressius o fregalls, ja que poden danyar l'acabat.
- Esbandiu bé amb aigua neta després de la neteja i eixugueu amb un drap suau per evitar taques d'aigua.
Manteniment preventiu
- Periodically check for any signs of leaks around the escutcheon or handle base. Address any leaks promptly to prevent water damage.
- Ensure all screws and connections remain tight. Do not overtighten.
Resolució de problemes
This section addresses common issues you might encounter with your trim kit.
| Problema | Causa possible | Solució |
|---|---|---|
| Water Leakage around Escutcheon | Improperly sealed escutcheon; loose mounting screws. | Turn off water supply. Remove escutcheon, reapply plumber's putty or silicone sealant, and re-install, ensuring screws are tight. |
| Handle is Loose or Wobbly | Set screw on handle is loose. | Locate the set screw (usually on the underside of the handle) and tighten it with a screwdriver. |
| Baix cabal d'aigua | Partially closed shut-off valve; debris in the valve. | Ensure the main water supply valve is fully open. If problem persists, consult a qualified plumber. |
Especificacions
| Característica | Detall |
|---|---|
| Fabricant | Lasco |
| Número de part | 31675OB |
| Pes de l'article | 640 grams |
| Dimensions del producte | 7.62 x 18.42 x 24.13 cm |
| Número de model | 31675OB |
| Color | Bronze fregat amb oli |
| Acabar | Bronze fregat amb oli |
| Material | Bronze |
| Nombre de peces | 1 |
| Característiques especials | Fàcil d'instal·lar |
| Components inclosos | Screw, Knob |
| Necessites piles? | No |
Garantia i Suport
Lasco warrants all its merchandise to be free from manufacturing defects. If you encounter any issues that you believe are due to a manufacturing defect, please return the product to the place of retail purchase for assistance.
For any plumbing-related questions, warranty claims, or defective parts replacement, it is recommended to contact the retailer where the product was purchased. They can provide accurate information and facilitate any necessary support or replacements.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.