UPBRIGHT UA120020E

UpBright 12V AC Adapter User Manual

Compatible with Black & Decker GCO1200, GC01200, GC1200 Series 12V DC Drill Drivers

Introducció

This manual provides instructions for the safe and effective use of your UpBright 12V AC Adapter. This adapter is designed to provide power and charge batteries for various Black & Decker 12V DC cordless drill drivers.

Nota important de compatibilitat: This adapter is specifically designed for Black & Decker 12V DC cordless drill drivers. The 12V rating refers to the drill's battery voltage, not the charger's output voltage. The charger's output voltage is typically 12V - 15V. Always verify compatibility with your specific drill model and part number before use.

UpBright AC Adapter compatible with Black & Decker 12V drill driver

Image: The UpBright AC adapter shown alongside various Black & Decker 12V cordless drill drivers, illustrating compatibility.

Què s'inclou

  • 1 x UpBright 12V AC Adapter
  • (Optional: Country-specific outlet adapter for international orders)
Close-up of UpBright 12V AC Adapter

Imatge: Un primer pla view of the UpBright 12V AC Adapter, showing its barrel round connector and product labeling.

Configuració i connexió

  1. Verificar la compatibilitat: Ensure your Black & Decker drill driver model (e.g., GCO1200, GC01200, GC1200) and part number (e.g., 90542490-01, UA120020E) are listed as compatible with this adapter.
  2. Inspeccioneu l'adaptador: Before use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
  3. Connecta't al trepant: Insert the barrel round connector of the AC adapter firmly into the charging port of your Black & Decker drill driver or its battery charging base.
  4. Connecteu-vos a la presa de corrent: Plug the AC adapter into a standard 100-240VAC 50/60Hz wall outlet.
  5. Indicació de càrrega: Refer to your drill driver's manual for specific charging indicators (e.g., LED lights) to confirm that charging has begun.
UpBright 12V AC Adapter with US plug

Image: The UpBright 12V AC Adapter featuring a standard Type A - 2 pin (North American) power plug.

Instruccions de funcionament

Once connected, the adapter will supply power to your Black & Decker drill driver or charge its battery. The adapter features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure safe operation.

  • Always ensure the adapter is used in a well-ventilated area.
  • Do not cover the adapter during operation.
  • Disconnect the adapter from the power outlet when not in use or before cleaning.
  • Eviteu utilitzar l'adaptador en llocs humits o secs.amp condicions.

Manteniment i cura

  • Neteja: Disconnect the adapter from the power source and the device. Wipe the adapter with a dry, soft cloth. Do not use liquid cleaners or solvents.
  • Emmagatzematge: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
  • Inspecció: Periodically check the adapter and cable for any signs of wear, cuts, or damage. Replace if any damage is observed.

Resolució de problemes

ProblemaCausa possibleSolució
Device not charging/receiving power.
  • Adapter not properly plugged into outlet.
  • Adapter not properly connected to device.
  • La presa de corrent no funciona.
  • Device or adapter is faulty.
  • Ensure adapter is fully inserted into a live wall outlet.
  • Verify the barrel connector is securely seated in the device's charging port.
  • Prova la presa de corrent amb un altre aparell que funcioni.
  • Si els problemes persisteixen, poseu-vos en contacte amb el servei d'atenció al client.
L'adaptador s'escalfa durant l'ús.Funcionament normal.Una lleugera escalfor és normal. Si l'adaptador s'escalfa excessivament o emet fum/olor, desendolleu-lo immediatament i deixeu d'utilitzar-lo.

Especificacions

  • Entrada Voltage: 100-240VAC, 50/60Hz
  • Vol. De sortidatage: 12V - 15V DC (for 12V drill batteries)
  • Corrent de sortida: 200 mA (0.2 Amps)
  • Wattage: 2.4 watts
  • Tipus de connector: Barrel Round Connector
  • Característiques de seguretat: Més del voltagProtecció contra sobrecorrent (OVP), protecció contra sobrecorrent (OCP), protecció contra curtcircuits (SCP)
  • Color: Negre
  • Material: Plàstic
  • Endoll d'alimentació: Tipus A - 2 pins (nord-americà)
  • Dispositius compatibles: Black & Decker GCO1200, GC01200, GC1200, GCO1200C, GC01200C, GCO1200CL 12V DC Cordless Drill Drivers; Part Numbers: 90542490, 90542490-01, 9054249001, UA120020E, UA120020

Garantia i Suport

This UpBright product comes with a warranty to ensure your satisfaction.

  • Garantia: 30 Days Refund, 24 Months Exchange.
  • Atenció al client: For any questions, troubleshooting assistance, or warranty claims, please contact your retailer or the UpBright customer service.
UpBright warranty certificate and international plug adapters

Image: A visual representation of the UpBright Limited Warranty Certificate, alongside examples of international plug adapters (AU, EU, UK) that may be included with international orders.

© 2023 UpBright. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.