UPBRIGHT Hunter Douglas PowerView Alimentació 18V 2A

UpBright 18V AC/DC Adapter User Manual

Compatible with Hunter Douglas PowerView/PowerRise Motorized Shades

1. Introducció

This manual provides essential instructions for the safe and effective use of your UpBright 18V AC/DC Adapter. This adapter is designed to power and charge compatible Hunter Douglas PowerView and PowerRise motorized shades and blinds.

2. Informació important de seguretat

  • Rechargeable Batteries Only: This adapter is designed to recharge ONLY rechargeable batteries. Do not attempt to recharge alkaline batteries, as this can cause damage or injury.
  • Entrada Voltage: L'adaptador admet un volum d'entrada mundialtage range of 100-240VAC, 50/60Hz.
  • Característiques de protecció: The adapter includes built-in safety features:
    • OVP (Over Voltage Output Protection): Protegeix contra un volum de sortida excessiutage.
    • OCP (Over Current Output Protection): Protegeix contra un corrent de sortida excessiu.
    • SCP (Short Circuit Output Protection): Protegeix contra curtcircuits.
  • Always ensure the adapter is used in a well-ventilated area.
  • No exposeu l'adaptador a l'aigua ni a una humitat excessiva.
  • Desconnecteu l'adaptador de la presa de corrent quan no l'utilitzeu durant períodes prolongats.

3. Contingut del paquet

El vostre paquet ha de contenir el següent element:

  • 1x UpBright 18V AC/DC Adapter

4. Instruccions de configuració

Follow these steps to connect your UpBright AC/DC adapter to your Hunter Douglas motorized shades:

  1. Locate the power input port on your Hunter Douglas motorized shade or blind. This is typically a barrel connector.
  2. Connect the male jack connector end of the adapter cable to the power input port on your shade. Ensure a secure connection.
  3. Plug the AC prongs of the UpBright 18V DC Plug-In Wall Transformer into a standard electrical wall outlet (100-240VAC, 50/60Hz).
  4. Once connected, your motorized shade should receive power, and if equipped with rechargeable batteries, they will begin charging.
Diagram showing how to connect the UpBright 18V AC/DC adapter to a Hunter Douglas motorized shade. The image illustrates the male jack connector from the shade plugging into the adapter's female port, and the adapter itself plugging into a wall outlet.

Figure 1: Connection Diagram for UpBright AC/DC Adapter

5. Funcionament

The UpBright 18V AC/DC Adapter provides continuous power to your Hunter Douglas motorized shades and blinds. If your shades are equipped with rechargeable batteries, the adapter will also facilitate their charging. No specific operational steps are required beyond proper connection.

6. Models compatibles

This UpBright 18V AC/DC Adapter is compatible with various Hunter Douglas PowerView and PowerRise motorized shades and blinds, including but not limited to the following models and part numbers:

  • Hunter Douglas PowerView M/N: 2002000036
  • Hunter Douglas PowerView Motor version 2 (18V Motorized Shades & Blinds Rechargeable Battery)
  • AMIGO Model No: AMS165-1802000FU
  • Número de peça: 7806000000
  • Hunter Douglas Luminette Privacy Sheer PowerView Motorization Kit
  • Hunter Douglas Part No.: 2989038000, 2989048000
  • Model: ADS0366-W180200, ADS0366W180200
  • Hunter Douglas Platinum Technology 2.1 18V DC Plug-in Transformer

7. Cura i Manteniment

  • Keep the adapter clean by wiping it with a dry, soft cloth.
  • Eviteu deixar caure l'adaptador ni sotmetre'l a impactes forts.
  • Guardeu l'adaptador en un lloc fresc i sec quan no l'utilitzeu.
  • Regularly inspect the cable and connectors for any signs of damage. If damage is found, discontinue use and replace the adapter.

8. Solució De Problemes

If your motorized shades are not receiving power or charging, consider the following:

  • Comproveu les connexions: Ensure that both ends of the adapter (to the shade and to the wall outlet) are securely plugged in.
  • Verifica la presa de corrent: Proveu la presa de corrent amb un altre dispositiu per confirmar que subministra corrent.
  • Inspeccioneu l'adaptador: Look for any visible damage to the adapter cable or housing. If damaged, do not use.
  • Shade Battery Type: Confirm that the batteries in your shade are rechargeable. This adapter cannot charge non-rechargeable (alkaline) batteries.

9. Especificacions del producte

CaracterísticaEspecificació
MarcaUPBRIGHT
Número de modelHunter Douglas PowerView Alimentació 18V 2A
Entrada Voltage100-240VAC (AC), 120 Volts (AC)
Freqüència d'entrada50/60Hz
Vol. De sortidatage18 volts (CC)
Corrent de sortida2 Amps
Wattage36 watts
Tipus de connectorConnector de barril
Tipus d'endoll d'alimentacióTipus A - 2 pins (nord-americà)
Característiques especialsMés del voltagProtecció contra sobrecorrent (OVP), protecció contra sobrecorrent (OCP), protecció contra curtcircuits (SCP)
Components inclososAdaptador

10. Garantia i Suport

This UpBright product comes with a Política de reemborsament de 30 dies i a 24-month exchange warranty. For support or warranty claims, please contact your retailer or the manufacturer directly.

© 2024 UPBRIGHT. All rights reserved.