Scanstrut APT-150-01 Aluminum Powertower Instruction Manual

1. Producte acabatview

The Scanstrut APT-150-01 Aluminum Powertower is a marine antenna mount designed to elevate radar domes, open array units, and smaller satellite TV/SatCom antennas. This elevation helps to clear obstructions, ensuring clear and unobstructed reception and performance for your marine electronics.

Constructed from rugged marine-grade aluminum, the Powertower features a corrosion-resistant coating, providing a secure and professional mounting solution suitable for powerboats, sportfishermen, and cruising vessels. Its design aims to deliver an optimal view of the horizon for radar performance in various marine conditions.

Figure 1.1: The Scanstrut APT-150-01 Aluminum Powertower, a 150mm (6") high marine mount.

2. Informació de seguretat

Read all instructions carefully before installation. Failure to follow these instructions may result in product damage, property damage, or personal injury.

• Ensure the mounting surface is structurally sound and capable of supporting the weight of the Powertower and the mounted equipment.
• Use appropriate tools and personal protective equipment during installation.
• Consulteu un tècnic nàutic qualificat si teniu dubtes sobre alguna part del procés d'instal·lació.
• Verify all fasteners are securely tightened before operating the vessel.
• Keep all electrical connections dry and sealed according to marine standards.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Scanstrut APT-150-01 Aluminum Powertower (1 unit)
• Mounting hardware (bolts, washers, nuts - quantity may vary based on specific kit)
• Cable seal inserts for various radome cables
• Installation template (if included)

4. Especificacions

5. Guia d'instal·lació

This section provides general guidelines for installing the Scanstrut APT-150-01 Powertower. Always refer to the specific instructions provided with your radar or antenna for precise mounting requirements.

5.1. Triar una ubicació de muntatge

The Powertower is designed for installation on the roof, T-top, flybridge, or radar arch of your powerboat. Select a location that provides a clear, unobstructed view of the horizon for optimal radar performance and minimizes interference from other equipment.

Figura 5.1: Example installation of a Powertower on a boat's T-top, providing an elevated position for marine electronics.

5.2. Mounting the Powertower

1. Prepara la superfície: Clean the mounting surface thoroughly. If using a template, position it accurately and mark the drilling points.
2. Forats de muntatge: Carefully drill holes according to the marked positions and recommended drill bit sizes. Ensure holes are properly sealed to prevent water ingress.
3. Secure the Powertower: Position the Powertower over the drilled holes. Apply marine sealant around the base if required by your vessel's construction or local regulations (note: marine sealant is generally not required for the internal cable seal, but may be needed for the base mount). Secure the Powertower using the provided mounting hardware. Tighten all fasteners evenly to ensure a stable mount.

Figure 5.2: The Powertower features a 25-degree rake, contributing to a modern aesthetic and optimal positioning.

5.3. Gestió de cables

The Powertower features an internally mounted Scanstrut DS30 cable seal with split bungs. This design allows for easy installation without the need to cut or remove plugs from your radar or antenna cables. Inserts are included to accommodate cables from all major radomes.

1. Cables de ruta: Guide the radar or antenna cables through the Powertower's internal channel.
2. Install Cable Seal: Utilize the appropriate split bung inserts for your cable diameter. Position the cable seal components to ensure a watertight entry and exit point for the cables.
3. Connexió d'equips: Mount your radar or antenna to the top plate of the Powertower according to the equipment manufacturer's instructions. Connect all necessary cables.

Figure 5.3: A radar unit securely mounted on the Scanstrut Powertower, demonstrating its robust construction.

6. Funcionament

The Scanstrut APT-150-01 Powertower is a passive mounting solution. Once installed, its primary function is to provide a stable and elevated platform for your marine radar or antenna. No active operation is required from the Powertower itself.

Ensure that the mounted equipment (radar, antenna) is operated according to its manufacturer's instructions. The Powertower's design helps optimize the performance of your marine electronics by providing an unobstructed field of view.

Figure 6.1: The Powertower is built to endure harsh marine environments, providing a reliable mount for critical navigation equipment.

7. Manteniment

Regular maintenance will ensure the longevity and continued performance of your Scanstrut Powertower.

• Neteja: Periodically clean the Powertower with fresh water and a mild, non-abrasive cleaner. Avoid harsh chemicals or solvents that could damage the finish.
• Inspecció: Regularly inspect all mounting hardware for tightness. Check for any signs of corrosion, wear, or damage to the Powertower or its components.
• Cable Seal: Ensure the cable seal remains intact and watertight. Replace any damaged bungs or seals promptly.
• Elements de fixació: Re-tighten any loose fasteners as necessary, but do not overtighten.

8. Solució De Problemes

Aquesta secció tracta problemes comuns que podeu trobar.

• Problema: Radar/Antenna performance is poor or intermittent.
  Solució:
  • Verify that the Powertower is securely mounted and free from excessive vibration.
  • Check for any new obstructions that might be blocking the line of sight of the radar/antenna.
  • Inspect all cable connections for corrosion or damage.
  • Refer to the troubleshooting guide for your specific radar or antenna unit.
• Problema: Water ingress around the cable entry point.
  Solució:
  • Ensure the internal DS30 cable seal is correctly installed with the appropriate split bungs for your cable diameter.
  • Check for any damage to the cable seal components and replace if necessary.
  • Verify that the cable itself is not damaged where it passes through the seal.
• Problema: Powertower appears loose or unstable.
  Solució:
  • Inspect all mounting bolts and nuts. Tighten them evenly and securely.
  • Check the integrity of the mounting surface on your vessel.

9. Garantia i Suport

The Scanstrut APT-150-01 Aluminum Powertower is backed by a Garantia limitada d'3 any. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For warranty claims, technical support, or further assistance, please contact Scanstrut customer service or your authorized Scanstrut dealer. Keep your proof of purchase for warranty validation.

Nota: The warranty does not cover damage caused by improper installation, misuse, neglect, unauthorized modifications, or acts of nature.