Introducció
The Electro-Voice ZX1-90 is an 8-inch, 200W, 2-way compact full-range passive loudspeaker designed for versatile sound reinforcement applications. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your ZX1-90 loudspeaker. Please read this manual thoroughly before using the product.
Informació de seguretat
Always observe the following safety precautions to prevent damage to the loudspeaker or injury to personnel:
- Maneig de potència: Do not exceed the rated power handling of 200W to prevent damage to the speaker components.
- Muntatge: Ensure all mounting hardware and structures are capable of safely supporting the weight of the loudspeaker. Follow all local building codes and regulations.
- Cablejat: Use appropriate gauge speaker cables and ensure secure connections to avoid short circuits or signal loss.
- Medi ambient: While the enclosure is inherently water resistant, avoid direct exposure to heavy rain or extreme moisture. Do not operate in excessively hot or cold environments.
- Protecció auditiva: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use hearing protection when operating the loudspeaker at high volumes.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Electro-Voice ZX1-90 8" 200W 2-Way Compact Full Range Passive Loudspeaker (1 unit)
Configuració
Opcions de muntatge
The ZX1-90 loudspeaker offers several mounting configurations for various applications:
- Muntatge de pal: The enclosure features an integrated pole mount for stand-alone applications using a standard speaker pole.
- Wedge Angle: The design allows for use as a stage monitor, positioning the speaker at an optimal angle for performers.
- Vent Mounting: Specific mounting points are available for secure installation. Consult a qualified installer for permanent installations.
Figure 1: Electro-Voice ZX1-90 loudspeaker, illustrating its compact design and integrated pole mount.
Connectivitat
The ZX1-90 is a passive loudspeaker and requires an external amplifier. Connect the loudspeaker to a suitable amplifier using high-quality wired speaker cables. Ensure the amplifier's output impedance matches the loudspeaker's impedance for optimal performance and to prevent damage.
En funcionament
Funcionament bàsic
Once connected to an amplifier, the ZX1-90 delivers full-range audio. Adjust the amplifier's volume and equalization settings to achieve the desired sound. The loudspeaker features full-bandwidth overload protection, ensuring reliable, long-term operation without audible distortion, even under demanding conditions.
Coverage Flexibility
The ZX1-90 offers a 90°x 50° coverage pattern. The horn can be rotated, allowing for either horizontal or vertical use to optimize coverage for your specific application. This flexibility ensures consistent sound distribution whether the speaker is used upright or on its side.
Manteniment
Atenció General
The ZX1-90 features a molded high-impact polymer enclosure that is extremely durable and inherently water resistant. To maintain its condition:
- Netegeu el recinte amb un suau, damp drap. Eviteu productes de neteja o dissolvents abrasius.
- Regularly inspect speaker grilles for any debris or damage.
- Assegureu-vos que totes les connexions romanguin segures.
- Store the loudspeaker in a dry, temperate environment when not in use.
Resolució de problemes
If you encounter issues with your ZX1-90 loudspeaker, consider the following basic troubleshooting steps:
- Sense so: Comproveu totes les connexions dels cables des del amplifier to the loudspeaker. Ensure the amplifier is powered on and functioning correctly. Verify the audio source is active.
- So distorsionat: Redueix el nivell d'entrada a amplifier. Check for damaged cables or connectors. Ensure the ampEl lifier no està sobrecarregat.
- So intermitent: Inspect all connections for looseness. Check for damaged cables.
- Volum baix: Confirmeu el amplifier's output level is appropriate. Check the impedance matching between the ampamplificador i altaveu.
If problems persist, consult a qualified audio technician or contact Electro-Voice customer support.
Especificacions
| Marca | Electro-veu |
| Nom del model | ZX1-90 |
| Número de model | ZX190 |
| Tipus d'altaveu | Woofer, Full Range |
| Mida de l'altaveu | 8 polzades |
| Diàmetre del woofer | 8 polzades |
| Diàmetre del Tweeter | 1 polzades |
| Potència de sortida màxima dels altaveus | 200 watts |
| Tecnologia de connectivitat | Amb cable |
| Mode de sortida d'àudio | Mono |
| Nombre de canals d'àudio | 2.0 |
| Tipus de muntatge | Pole mount, Wedge |
| Material de tancament | Plastic, Fabric/Kevlar (Cone) |
| Color | Negre |
| Nivell de resistència a l'aigua | Resistent a l'aigua |
| Usos específics per al producte | Commercial, Compact Sound Reinforcement |
| Dimensions de l'article (D x W x H) | 12 "P x 19" W x 13" H |
| Font d'alimentació | Elèctric amb cable |
| Dispositius compatibles | Ordinador portàtil, reproductor MP3, telèfon intel·ligent, tauleta, televisió |
Garantia
The Electro-Voice ZX1-90 loudspeaker comes with a Garantia limitada d'5 any. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full terms and conditions, refer to the official Electro-Voice warranty documentation or contact customer support.
Suport
For further assistance, technical support, or service inquiries, please visit the official Electro-Voice weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. També podeu trobar més informació i productes a Botiga Electro-Voice a Amazon.