Introducció
The beyerdynamic DT 1770 Pro is a professional studio reference headphone designed for mixing, mastering, monitoring, and recording applications. Featuring Tesla 2.0 technology, these closed-back headphones deliver precise and powerful sound reproduction. This manual provides essential information for the proper setup, operation, and maintenance of your DT 1770 Pro headphones.

Image: beyerdynamic DT 1770 Pro Studio Headphones, front view.
Configuració
Follow these steps to set up your beyerdynamic DT 1770 Pro headphones:
- Desembalatge: Carefully remove all components from the premium carrying case. The package includes the headphones, two sets of ear pads (velour and leatherette), two detachable cables (one coiled, one straight 3m), and a 1/4" adapter.
- Attaching Ear Pads: Select your preferred ear pads. The velour pads offer a breathable feel, while the leatherette pads provide enhanced sound isolation. Align the ear pad with the earcup and gently stretch it around the rim until it is securely seated.
- Connexió del cable: The DT 1770 Pro features a single-sided, detachable cable with a mini-XLR connector. Insert the mini-XLR end of your chosen cable (coiled or straight) into the port on the left earcup until it clicks securely into place.
- Connexió a la font d'àudio: Connect the other end of the cable (3.5 mm jack) to your audio device. If your device requires a 1/4" connection, use the included adapter. Ensure the connection is firm.
- Ajust d'ajust: Adjust the headband to ensure a comfortable and secure fit. The earcups should fully enclose your ears without excessive pressure.

Imatge: Primer pla view of the DT 1770 Pro earcup, highlighting the detachable cable connection point.
En funcionament
The DT 1770 Pro headphones are designed for optimal performance with professional audio equipment. Due to their 250 Ohm impedance, a dedicated headphone amplifier or an audio interface with sufficient output power is recommended for optimal sound quality and volume levels.
- Control de volum: Adjust the volume directly from your audio source or amplifier. Start with a low volume and gradually increase it to a comfortable listening level.
- Aïllament acústic: These closed-back headphones provide passive sound isolation, reducing external noise and preventing sound leakage.
- Ús estès: The ergonomic design and soft, replaceable ear pads are engineered for comfort during long studio sessions. Take regular breaks to prevent listening fatigue.

Image: A person wearing beyerdynamic DT 1770 Pro headphones, demonstrating typical usage in a studio environment.
Manteniment
Una cura adequada garanteix la longevitat i el rendiment dels vostres auriculars:
- Neteja: Use a soft, dry cloth to clean the exterior of the headphones. For ear pads, follow specific cleaning instructions provided by beyerdynamic or use a mild, damp cloth and allow them to air dry completely before reattaching.
- Substitució de les coixinetes de les orelles: Ear pads are replaceable. If they become worn or damaged, new ones can be purchased from authorized retailers. Refer to the setup section for removal and attachment.
- Cura del cable: The detachable cables are designed for durability. Avoid sharp bends or excessive pulling. If a cable becomes damaged, it can be replaced.
- Emmagatzematge: When not in use, store the headphones in the provided premium carrying case to protect them from dust, moisture, and physical damage.
Resolució de problemes
If you encounter issues with your headphones, consider the following:
- Sense so:
- Ensure the cable is securely connected to both the headphone and the audio source.
- Check the volume level on your audio source and any connected ampmés viu.
- Test the headphones with a different audio source or cable to isolate the problem.
- So distorsionat:
- Reduce the volume level on your audio source.
- Ensure the audio source is providing a clean signal.
- Verify that the ear pads are correctly attached and not obstructing the drivers.
- Ajust incòmode:
- Ajusta la diadema per a un ajust més ample o més ajustat.
- Try switching between the velour and leatherette ear pads to find the most comfortable option for extended wear.
Especificacions
| Característica | Especificació |
|---|---|
| Nom del model | DT 1770 PRO |
| Marca | BEYERDYNAMIC |
| Col·locació de l'orella | Sobre l'orella |
| Factor de forma | Tancat |
| Tecnologia de connectivitat | Amb cable |
| Impedància | 250 ohms |
| Resposta de freqüència | 5 - 40,000 Hz |
| Tipus de controlador d'àudio | Dynamic Tesla Neodymium Drivers |
| Mida del controlador d'àudio | 45 mil·límetres |
| Control de soroll | Aïllament acústic |
| Característica del cable | Detachable, Single-sided |
| Pes de l'article | 1.5 lliures (aprox. 680 g) |
| Dimensions del producte | 7 x 8.5 x 4 polzades |
| Components inclosos | Headphones, Premium Carrying Case, Coiled Cable, Straight Cable (3m), Leatherette Earpads, 1/4" Adapter |
Vídeo oficial del producte
Video: An official beyerdynamic video showcasing the features and design of the DT 1770 Pro Studio Headphones.
Garantia i Suport
For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official beyerdynamic website or contact their customer service. You can also find more information on the beyerdynamic Store on Amazon.