Introducció
The Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock is designed to provide accurate time, indoor temperature, and convenient alarm functions. Its radio-controlled feature automatically synchronizes the time, ensuring precision. The unique projection feature allows you to view the time on your ceiling or wall, enhancing usability in low-light conditions.
Característiques principals:
- Dual Alarm (Weekday/Daily alarm options)
- Display de temperatura interior
- Time Projection onto ceiling or wall
- LED Backlight for LCD display
- Atomic Clock Synchronization for precise timekeeping
- Funció de posposar
Contingut del paquet
Si us plau, comproveu que els següents elements estiguin inclosos al vostre paquet:
- Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock unit
- Adaptador de corrent alterna
- Piles AAA (2x)
- Manual d'instruccions (aquest document)
Producte acabatview
Familiaritzeu-vos amb els components i controls principals del vostre despertador.
Imatge: Davant view of the Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock. The image displays the clock's main body, featuring a digital LCD screen that shows time and temperature. A projection lens is visible on the top left side, designed to project the time. The clock has a clean, white finish.
Panell frontal:
- Pantalla LCD: Shows current time, indoor temperature, and alarm status.
- Lent de projecció: Projects time onto a surface.
- Botó SNOOZE/LLUM: Activates snooze during alarm, illuminates backlight, or temporarily activates projection.
Rear/Side Panel:
- Botó MODE: Toggles display modes and enters setting menus.
- Botons UP/DOWN: Adjust values during settings, manually activate atomic time search.
- Botons d'ALARMA 1/2: Select and set Alarm 1 or Alarm 2.
- PROJECTION ON/OFF Switch: Controls continuous projection.
- PROJECTION ROTATION Button: Rotates projected image 180 degrees.
- Botó de reset: Resets the unit to factory defaults.
- Compartiment de la bateria: Holds backup batteries.
- Presa DC IN: Es connecta a l'adaptador d'alimentació CA.
Configuració
1. Instal·lació de la bateria
- Obriu la tapa del compartiment de la bateria a la part posterior de la unitat.
- Insert two (2) AAA batteries, observing the correct polarity (+ and -).
- Close the battery compartment cover. These batteries provide backup power during outages.
2. Connect AC Power Adapter
- Plug the AC power adapter into the DC IN jack on the back of the clock.
- Plug the adapter into a standard wall outlet. The clock will power on, and the LCD display will activate. Continuous projection requires AC power.
3. Atomic Clock Synchronization
Upon initial power-up, the clock will automatically attempt to synchronize with the atomic clock signal. This process may take several minutes to several hours, depending on your location and signal strength. Place the clock near a window for best reception.
- A signal icon will appear on the LCD when synchronization is successful.
- To manually initiate a signal search, press and hold the UP botó durant 3 segons.
4. Setting Time Zone
After successful atomic synchronization, you may need to set your local time zone.
- Manteniu premut el botó MODE botó durant 3 segons per entrar al mode de configuració de l'hora.
- Premeu el botó MODE button repeatedly until the Time Zone setting flashes.
- Utilitza el UP or ABAIX buttons to select your desired time zone (e.g., EST, CST, MST, PST).
- Premeu MODE to confirm and exit, or wait 30 seconds for automatic exit.
Instruccions de funcionament
Manual Time and Date Setting (If Atomic Sync Fails)
- Manteniu premut el botó MODE button for 3 seconds. The hour digit will flash.
- Utilitza el UP or ABAIX botons per ajustar l'hora.
- Premeu MODE to confirm and move to the next setting (minutes, year, month, day, 12/24 hour format, Daylight Saving Time (DST) ON/OFF).
- Repeat steps 2 and 3 until all settings are adjusted.
- Premeu MODE to exit, or wait 30 seconds for automatic exit.
Configuració d'alarmes (alarma 1 i alarma 2)
El rellotge té dues alarmes independents (Alarma 1 i Alarma 2).
- Premeu el botó ALARMA 1 or ALARMA 2 botó una vegada per mostrar l'hora d'alarma actual.
- Press and hold the respective ALARMA button for 3 seconds. The alarm hour will flash.
- Utilitza el UP or ABAIX botons per ajustar l'hora de l'alarma.
- Premeu el botó ALARMA button to confirm and move to alarm minutes.
- Adjust alarm minutes using UP or ABAIX.
- Premeu el botó ALARMA button to confirm and move to alarm type (Daily or Weekday).
- Adjust alarm type using UP or ABAIX.
- Premeu el botó ALARMA button to confirm and exit, or wait 30 seconds for automatic exit.
Per activar o desactivar una alarma, premeu la tecla ALARMA 1 or ALARMA 2 button once. An alarm icon will appear on the LCD when active.
Funció de posposar
Quan soni una alarma, premeu el botó SNOOZE / LIGHT button to temporarily silence the alarm for approximately 8 minutes. The alarm will sound again after the snooze period. To stop the alarm completely, press any other button.
Projecció del temps
- Projecció contínua: Feu lliscar el PROJECCIÓ ON/OFF canviar a ON. The time will be continuously projected. This feature requires the AC power adapter to be connected.
- Temporary Projection: If continuous projection is off, press the SNOOZE / LIGHT button to activate projection for approximately 15 seconds.
- Projection Orientation: Premeu el botó ROTACIÓ DE PROJECCIÓ button to flip the image 180 degrees, ensuring it is displayed right-side up on your chosen surface.
- Ajust de l'angle de projecció: The projection lens can be manually tilted to adjust the projection angle on your ceiling or wall.
Llum de fons LED
Premeu el botó SNOOZE / LIGHT button to illuminate the LCD display backlight for approximately 15 seconds.
Manteniment
Neteja de la unitat
Wipe the clock with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the unit. Ensure the unit is unplugged from the AC power before cleaning.
Canvi de bateria
When the backup batteries are low, the display may dim or settings may be lost during power outages. Replace the two (2) AAA batteries in the battery compartment, observing correct polarity.
Resolució de problemes
| Problema | Solució |
|---|---|
| La pantalla del rellotge està en blanc o fosca. | Ensure the AC power adapter is securely connected to both the clock and a working wall outlet. Check if backup batteries are installed correctly and are not depleted. |
| Atomic time synchronization fails or is inaccurate. | Place the clock near a window, away from electronic devices that may cause interference. Manually initiate a signal search by holding the UP button. If synchronization consistently fails, manually set the time and date. |
| Time projection is not visible or is dim. | Ensure the AC power adapter is connected for continuous projection. Check the PROJECCIÓ ON/OFF switch. Adjust the projection lens angle. Ensure the room is sufficiently dark for optimal visibility. |
| Projected time is upside down or backwards. | Premeu el botó ROTACIÓ DE PROJECCIÓ button to flip the image 180 degrees. Adjust the physical orientation of the clock if needed. |
| L'alarma no sona. | Ensure the alarm is activated (alarm icon visible on LCD). Verify the alarm time is set correctly. Check if the volume is not set to minimum (if applicable, though this model doesn't specify volume control). |
| Snooze/Light button only activates backlight for 15 seconds, not 5 minutes. | The backlight duration is fixed at approximately 15 seconds for temporary illumination. The 5-minute duration mentioned in some older documentation may not apply to this specific model. |
Especificacions
| Característica | Detall |
|---|---|
| Model | RM338PA |
| Dimensions (LxWxH) | 4.25" x 1.02" x 3.03" (10.8 cm x 2.6 cm x 7.7 cm) |
| Pes | 0.24 lliures (109 g) |
| Rang de temperatura interior | -5 °C a 50 °C (de 23 °F a 122 °F) |
| Precisió de la temperatura | 0°C to 40°C: ±1°C (±2°F); 40°C to 0°C: ±2°C (±4°F) |
| Resolució de temperatura | 0.1 °C (0.2 °F) |
| Font d'alimentació | AC Power Adapter (included), 2 x UM-4 (AAA) 1.5V batteries (for backup) |
| Tipus de visualització | LCD digital amb retroiluminació LED |
| Característiques especials | Atomic Time, Time Projection, Dual Alarm, Snooze, Indoor Temperature |
Informació de la garantia
Oregon Scientific products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Oregon Scientific weblloc web. Conserveu el rebut de compra com a comprovant de compra.
Atenció al client
If you encounter any issues or have questions regarding your Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock, please visit the official Oregon Scientific support website or contact their customer service department for assistance. Contact information can typically be found on the manufacturer's weblloc o a l'embalatge del producte.