Philips 800144 Downlight Surface Mounted LED Fixture User Manual

Producte acabatview

The Philips 800144 LED Surface Mounted Fixture is designed to convert existing ceiling-mounted fixtures or standard recessed cans into an energy-efficient LED light source. This dimmable fixture provides a soft white light, suitable for various indoor and outdoor applications.

Image: Philips 800144 Downlight Surface Mounted LED Fixture. This image shows the compact design of the LED fixture, ready for installation.

Característiques principals:

• Eficiència energètica: 13-watt LED, equivalent to a 75-watt standard incandescent bulb.
• Llarga vida útil: Rated for 36,000 hours (based on 3 hours/day usage).
• Muntatge versàtil: Can be mounted to a 4-inch junction box or in a 5/6-inch recessed housing.
• Llum blanca suau: Provides a comfortable ambiance for general room lighting.
• Regulable: Compatible with dimmer switches for adjustable brightness.
• Wet Location Suitable: Ideal for bathrooms, showers, or covered outdoor areas.

Configuració i instal·lació

This fixture is designed for surface mounting and can be installed directly onto a 4-inch junction box or within a 5/6-inch recessed housing. No complex assembly is required for the fixture itself.

Passos d'instal·lació:

1. La seguretat primer: Ensure power to the installation area is turned off at the circuit breaker before beginning.
2. Preparació de la superfície de muntatge: For junction box installation, ensure the box is securely fastened. For recessed housing, ensure the housing is properly installed.
3. Connecteu el cablejat: Connect the fixture's wires to the corresponding household wires (live, neutral, ground) according to local electrical codes. Use appropriate wire connectors.
4. Fixació de muntatge: Secure the fixture to the junction box or recessed housing using the provided hardware. Ensure a snug fit against the ceiling surface.
5. Restaura l'alimentació: Once the fixture is securely mounted and wired, restore power at the circuit breaker.
6. Funcionalitat de prova: Engegueu l'interruptor de la llum per comprovar el funcionament correcte.

Note: Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

Instruccions de funcionament

The Philips 800144 LED fixture operates on a standard 120-volt electrical supply. It provides 1100 lumens of soft white LED light. The fixture is dimmable, allowing you to adjust the light output using a compatible dimmer switch.

Temperatura de color de la llum:

Understanding color temperature helps in choosing the right lighting for your space. While this fixture provides a soft white light, the following chart illustrates various color temperatures and their typical ambiances.

Image: Color Temperature Chart. This chart displays different light color temperatures ranging from warm amber (2000-2200K) to cool daylight deluxe (6500K), illustrating the ambiance each creates. The Philips 800144 provides a soft white light, typically around 2700K-3000K.

Funcionalitat regulable:

To utilize the dimming feature, ensure the fixture is connected to a compatible dimmer switch. Refer to your dimmer switch's instructions for proper operation and compatibility.

Manteniment

The Philips 800144 LED fixture is designed for long-term, maintenance-free operation with a lifespan of approximately 36,000 hours. As an LED fixture, it does not require bulb replacement.

Neteja:

• Abans de netejar, assegureu-vos que l'aparell estigui desconnectat a l'interruptor.
• Netegeu l'exterior de l'aparell amb un drap suau iamp tela.
• Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• Assegureu-vos que l'aparell estigui completament sec abans de restablir el corrent.

Resolució de problemes

If you encounter issues with your Philips 800144 LED fixture, refer to the following common troubleshooting steps:

• El llum no s'encén:
  • Comproveu l'interruptor per assegurar-vos que l'aparell rep corrent.
  • Verify that the light switch is in the "on" position.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Parpelleigs de llum:
  • Ensure the fixture is compatible with your dimmer switch, if one is installed. Some LED fixtures require specific types of dimmers.
  • Comproveu si hi ha connexions de cablejat soltes.
  • Flickering can sometimes indicate an aging power supply within the LED fixture, especially after several years of use.
• Light is Dim or Uneven:
  • Si feu servir un regulador d'intensitat, assegureu-vos que estigui configurat al nivell de brillantor desitjat.
  • Verify that the fixture is receiving the correct voltage (120 volts).

If these steps do not resolve the issue, contact Philips customer support for further assistance.

Especificacions

Informació de la garantia

The Philips 800144 Downlight Surface Mounted LED Fixture comes with a manufacturer's warranty covering 2 anys per a peces i mà d'obra des de la data de compra. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

For warranty service or questions, please contact Philips customer support.

Atenció al client

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Philips customer service. Visit the official Philips weblloc web per obtenir dades de contacte i recursos de suport.

Fabricant: Il·luminació Philips

Marca: Philips