VViViD Air-Tint Blue Headlight/Tail Light Window Tint (12 Inch x 24 Inch) 2 Pack Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation and care of your VViViD Air-Tint Blue Headlight/Tail Light Window Tint. VViViD Air-Tints are designed with advanced air-release membrane technology, allowing for dry application without the need for installation liquids. This film is highly conformable with heat, making it suitable for various shapes, and features self-healing properties to address minor scratches.

Image 1: A red car showcasing the VViViD Air-Tint Blue applied to its headlights, providing a distinct aesthetic.

2. Característiques del producte

• Air-Release Membrane: Allows for dry installation, eliminating the need for wet application methods.
• High Conformability: Super conformable with heat, enabling application on complex and curved surfaces.
• Self-Healing: Minor scratches on the film surface can be removed with the application of heat.
• Material durador: Made with scratch-resistant automotive-grade cast vinyl.
• Chemical Safe Adhesive: Acrylic-based adhesive is 100% chemical safe and will not damage headlight coatings or plastic.
• Reduced Shrinkage: Engineered to minimize shrinkage and peeling.

3. Contingut del paquet

Your VViViD Air-Tint Blue Headlight/Tail Light Window Tint package includes:

• 2 rolls of VViViD Air-Tint Blue Headlight/Tail Light Window Tint (12 Inch x 24 Inch each)

4. Eines necessàries

For optimal installation, you will need the following tools:

• Netejador multiusos
• Tela de microfibra
• Cinta adhesiva
• Soft measuring tape
• Craft knife or sharp blade
• Racleta
• Heat gun or hair dryer

Image 2: Infographic detailing the dry-apply installation process, including steps for cleaning, measuring, masking, applying, squeegeeing, trimming, and detailing.

5. Guia d'instal·lació

Follow these steps for a successful dry application of your VViViD Air-Tint:

1. Netegeu la superfície: Thoroughly clean the headlight or taillight surface with an all-purpose cleaner and a microfiber cloth. Ensure the surface is free of dirt, dust, oils, and any contaminants.
2. Mesura i talla: Measure the area of the light you intend to tint. Cut the vinyl film to size, allowing for extra material around the edges for easier handling and positioning. It is recommended to measure generously.
3. Masking (Optional but Recommended): Use masking tape around the edges of the light to protect surrounding paintwork and provide a clean guide for trimming.
4. Peel and Position: Carefully peel back a portion of the backing paper from the vinyl. Position the exposed adhesive side onto the flattest part of the light. Avoid touching the adhesive with your fingers to prevent contamination.
5. Apply and Squeegee: Slowly remove the remaining backing paper while simultaneously applying the film to the light. Use a squeegee to smooth out the film, working from the center outwards to push out any trapped air bubbles. The air-release technology allows for easy bubble removal.
6. Conform with Heat: For curved or complex sections, gently heat the vinyl with a heat gun or hair dryer. This will make the film pliable, allowing it to stretch and conform to the contours of the light. Continue to squeegee as you heat and stretch. Ensure there is no tension on the edges to prevent future lifting.
7. Retallar l'excés: Once the film is fully applied and conformed, use a sharp craft knife or blade to carefully trim away any excess material around the edges of the light. Ensure a clean, precise cut for a professional finish.
8. Final Heat Post-Heating: After trimming, apply heat to all edges and corners of the installed tint. This helps to set the adhesive and prevent lifting, ensuring long-term durability.

Installation Video Tutorials

6. Cura i Manteniment

• Neteja: Clean the tinted surface with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the film.
• Self-Healing: The film features self-healing properties. Minor scratches can often be removed by gently applying heat with a heat gun or hair dryer.
• Seguretat química: The acrylic-based adhesive is designed to be 100% chemical safe and will not harm your vehicle's headlight coatings or plastic.

7. Solució De Problemes

• Bombolles d'aire: If air bubbles appear after initial application, use your squeegee to push them towards the nearest edge. The air-release channels are designed to facilitate this.
• Vores d'elevació: If edges begin to lift, re-apply heat with a heat gun and firmly press down with a squeegee or your finger to re-adhere the film. Ensure no tension is applied during the initial installation to prevent this.
• Arrugues/Plegues: For minor wrinkles, apply heat and gently stretch the film while smoothing it with a squeegee. For severe creases, it may be necessary to carefully lift the film, re-heat, and re-apply.

8. Especificacions

9. Garantia i Suport

For warranty information, technical support, or any questions regarding your VViViD Air-Tint product, please visit the official VViViD website or contact their customer service. You can find more information and products at the VViViD Store on Amazon.