Introducció
The Westek SW103CT Outdoor Swivel Photo Control is designed to automate your outdoor lighting. This device utilizes a photocell sensor to detect ambient light levels, automatically turning connected lights on at dusk and off at dawn. This manual provides essential information for safe installation, proper operation, and maintenance of your photo control unit.
Image: Two Westek SW103CT Outdoor Swivel Photo Controls, illustrating the product's appearance and wiring.
Informació de seguretat
- ADVERTÈNCIA: Risc de descàrrega elèctrica. Desconnecteu l'alimentació a l'interruptor automàtic o a la caixa de fusibles abans de la instal·lació o el manteniment.
- Installation should be performed by a qualified electrician or a person with electrical knowledge.
- Assegureu-vos que totes les connexions de cablejat siguin segures i que compleixin els codis elèctrics locals.
- This product is designed for outdoor use. While the sensor itself is described as weather-proof, ensure all electrical connections are properly sealed and protected from direct water exposure to prevent damage and ensure safety. The product is not submersible.
- No supereu la potència màximatage rating of 150 watts for connected lighting.
- Operate only within the specified voltage range (2 Volts, typically 120V AC for household applications, please verify your specific application voltagi).
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Westek SW103CT Outdoor Swivel Photo Control (2 units)
- Maquinari de muntatge
Especificacions
| Marca | Westek |
| Número de model | SW103CT |
| Material | Plàstic |
| Ús interior/exterior | A l'aire lliure |
| Font d'alimentació | Elèctric amb cable |
| Voltage | 2 Volts (Note: This typically refers to the control voltage, not line voltage. Standard line voltage for such devices is 120V AC. Consult product packaging for exact operating voltage.) |
| Wattage | 150 watts (màxim) |
| Light Source Compatibility | Fluorescent, LED, Incandescent, Halogen |
| Dimensions de l'article (L x A x A) | 6.75 cm de llargada x 4 cm d'amplada x 2.5 cm d'alçada |
| Pes de l'article | 5.6 unces |
Image: Key features of the Westek SW103CT, highlighting the photocell sensor, swivel adjustment, and weatherproof construction.
Instal·lació
Abans de començar: Ensure power is disconnected at the circuit breaker. Failure to do so may result in serious injury or death.
- Preparació del cablejat: The photo control unit comes with 6-inch pre-stripped leads for easy connection.
- Muntatge: The unit connects directly to a standard 1/2-inch pipe thread electrical box. Secure the photo control to the electrical box using the provided mounting hardware.
- Connexions de cablejat: Connect the photo control wires to your electrical system as follows:
- Fil negre: Connect to the incoming Línia (calenta) cable de la vostra font d'alimentació.
- Fil blanc: Connecta't al Neutre wire from your power source and to the neutral wire of your light fixture.
- Fil vermell: Connecta't al Load (Hot) wire of your outdoor light fixture.
- Posicionament: The swivel feature allows for optimal light positioning of the photocell sensor. Aim the sensor away from direct artificial light sources (e.g., porch lights, streetlights) that could interfere with its operation. Ensure it has clear exposure to natural daylight.
- Restaura l'alimentació: Un cop finalitzada la instal·lació i totes les connexions siguin segures, restableu l'alimentació a l'interruptor.
Image: Westek SW103CT photo control with visible wiring for electrical connection.
Image: Installation details for the Westek SW103CT, showing connection to an electrical box and maximum wattage.
Funcionament
The Westek SW103CT Photo Control operates automatically based on ambient light levels:
- Activació del crepuscle: When natural light diminishes to a certain level (dusk), the photocell sensor will activate, turning on the connected outdoor lights.
- Desactivació de l'alba: As natural light increases to a sufficient level (dawn), the photocell sensor will deactivate, turning off the connected outdoor lights.
- Temps de retard: The unit incorporates a time delay feature to prevent nuisance flickering or false activation/deactivation due to transient light changes (e.g., car headlights, lightning).
Manteniment
To ensure optimal performance and longevity of your photo control unit:
- Neteja el sensor: Periodically inspect the photocell sensor lens for dirt, dust, or debris. Gently wipe it clean with a soft, damp tela. No utilitzeu netejadors abrasius.
- Inspeccionar connexions: Annually, or if issues arise, inspect all electrical connections for corrosion or looseness. Ensure they remain secure and properly insulated.
- Elimina les obstruccions: Ensure no new obstructions (e.g., growing foliage, new structures) are blocking the sensor's exposure to natural light.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Els llums no s'encenen al capvespre. |
|
|
| Els llums no s'apaguen a l'alba. |
|
|
| Lights flicker or cycle on/off rapidly. |
|
|
Garantia i Suport
For warranty information, technical support, or replacement parts, please contact Westek customer service. Keep your purchase receipt as proof of purchase.
Fabricant: American Tack
Weblloc: Visita la botiga Westek a Amazon