Introducció
This manual provides instructions for the safe and effective operation and maintenance of your INSIZE 1108-150 Electronic Caliper. Please read this manual thoroughly before use and retain it for future reference.
Figura 1: Davant view of the INSIZE 1108-150 Electronic Caliper, showing the digital display, measurement jaws, and control buttons.
Producte acabatview
The INSIZE 1108-150 is a precision electronic caliper designed for accurate dimensional measurements. It features a clear digital display and is constructed from durable stainless steel.
Característiques principals:
- Measurement Range: 0-6 inches / 0-150 mm
- Resolució: 0.0005 polzades / 0.01 mm
- Accuracy: ±0.0008 inches
- Funció d'apagat automàtic
- Inch/millimeter conversion
- Zero setting at any position
- Data output capability
- Construcció d'acer inoxidable
Figura 2: Technical diagram illustrating the INSIZE 1108-150 Electronic Caliper's dimensions and key specifications.
Figura 3: Enrere view of the INSIZE 1108-150 Electronic Caliper, displaying the serial number and the battery compartment location.
Contingut del paquet
En obrir el paquet, comproveu que tots els elements hi siguin presents i que no estiguin danyats:
- INSIZE 1108-150 Electronic Caliper (Main Unit)
- Pila CR2032 (preinstal·lada o inclosa per separat)
- Hard Plastic Storage Case
- Manual d'instruccions d'operació
- Certificat d'inspecció
Figura 4: The INSIZE 1108-150 Electronic Caliper, its instruction manual, and inspection certificate neatly stored within its protective hard plastic case.
Configuració
Instal·lació de la bateria
The caliper uses one CR2032 battery. If the display does not turn on or shows a low battery indicator, replace the battery.
- Locate the battery compartment cover on the digital unit (refer to Figure 3).
- Slide the cover open or use a small tool to gently pry it open.
- Remove the old battery, noting its polarity.
- Inseriu una nova bateria CR2032 amb el costat positiu (+) cap amunt.
- Tanqueu bé la tapa del compartiment de la bateria.
Figura 5: The INSIZE 1108-150 Electronic Caliper alongside a CR2032 battery, indicating the battery type required for operation.
Instruccions de funcionament
Encesa/apagada
- Encendre: Press the "ON/OFF" button or simply move the digital unit along the beam.
- Apagar: Press the "ON/OFF" button. The caliper will also automatically power off after a period of inactivity.
Configuració zero
The zero point can be set at any position, allowing for incremental measurements.
- Close the measuring jaws completely for absolute zero, or position the jaws at your desired reference point.
- Press the "ZERO" button. The display will show "0.00" or "0.000".
Inch/Millimeter Conversion
To switch between inch and millimeter units:
- Press the "INCH/MM" button. The display will toggle between the two units.
Prendre mesures
- Ensure the caliper is clean and the jaws are free of debris.
- Turn on the caliper and set the zero point as needed.
- Gently open the jaws and position the workpiece between the appropriate measuring surfaces (outside jaws for external dimensions, inside jaws for internal dimensions, or depth rod for depth measurements).
- Close the jaws until they make firm, but not excessive, contact with the workpiece.
- Llegiu la mesura directament a la pantalla digital.
Figura 6: A user demonstrating the measurement of an external diameter on a cylindrical metal part using the INSIZE 1108-150 Electronic Caliper.
Manteniment
Neteja
- Regularly clean the measuring surfaces and the beam with a clean, dry, lint-free cloth.
- Avoid using solvents or abrasive cleaners, as these can damage the display or measuring surfaces.
- Keep the digital unit dry. While the caliper is made of stainless steel, the electronic components are not waterproof.
Emmagatzematge
- Store the caliper in its protective hard plastic case when not in use to prevent damage.
- Store in a dry environment, away from direct sunlight and extreme temperatures.
- Slightly open the jaws before storing to relieve tension on the measuring surfaces.
Figura 7: The INSIZE 1108-150 Electronic Caliper resting securely within its custom-fit hard plastic storage case, ready for protection when not in use.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla no s'encén. | Bateria morta o instal·lada incorrectament. | Substituïu la pila CR2032, assegurant-vos de la polaritat correcta. |
| Inaccurate or fluctuating readings. | Dirt/debris on measuring surfaces or beam; low battery; damaged sensor. | Clean the caliper thoroughly. Replace battery. If problem persists, contact support. |
| "ZERO" button not responding. | Button malfunction or electronic issue. | Ensure battery is fully charged. If problem persists, contact support. |
| Automatic power off not working. | Mal funcionament electrònic. | Contacta amb l'assistència. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 1108-150 |
| Interval de mesura | 0-6 polzades / 0-150 mm |
| Resolució | 0.0005 mm / 0.01 mm |
| Precisió | ±0.0008 polzades |
| Material | Acer inoxidable |
| Tipus de bateria | CR2032 (1 incloses) |
| Funcions | ON/OFF, ZERO, Inch/mm conversion, Data Output |
| Apagat automàtic | Sí |
| Dimensions del producte | 10.28 "L x 4.09" W x 1.3" H |
| Pes | 13.67 unces |
Figura 8: Un detallat view of the INSIZE Inspection Certificate, confirming the calibration and accuracy of the Digital Caliper model 1108-150.
Garantia i Suport
INSIZE products are manufactured to high standards and undergo strict quality control. For warranty information, technical support, or service, please refer to the contact details provided in the included warranty certificate or visit the official INSIZE weblloc.
INSIZE Contact Information:
- INSIZE USA: www.insize.com
- Refer to your product's specific warranty card for regional contact details.